"git checkout" doing too many things is a source of confusion for many users (and it even bites old timers sometimes). To remedy that, the command will be split into two new ones: switch and something-to-checkout-paths. The good old "git checkout" command is still here and will be until all (or most of users) are sick of it.
See the new man page for the final design of switch. The actual implementation though is still pretty much the same as "git checkout" and not completely aligned with the man page. Following patches will adjust their behavior to match the man page. --- .gitignore | 1 + Documentation/config/advice.txt | 13 +- Documentation/config/branch.txt | 4 +- Documentation/config/checkout.txt | 9 +- Documentation/config/diff.txt | 3 +- Documentation/git-checkout.txt | 4 + Documentation/git-switch.txt | 259 ++++++++++++++++++++++++++++++ Documentation/gitattributes.txt | 3 +- Documentation/githooks.txt | 8 +- Makefile | 1 + builtin.h | 1 + builtin/checkout.c | 60 +++++-- command-list.txt | 1 + git.c | 1 + 14 files changed, 341 insertions(+), 27 deletions(-) create mode 100644 Documentation/git-switch.txt diff --git a/.gitignore b/.gitignore index 7374587f9d..c687b92b1c 100644 --- a/.gitignore +++ b/.gitignore @@ -167,6 +167,7 @@ /git-submodule /git-submodule--helper /git-svn +/git-switch /git-symbolic-ref /git-tag /git-unpack-file diff --git a/Documentation/config/advice.txt b/Documentation/config/advice.txt index 88620429ea..239d479506 100644 --- a/Documentation/config/advice.txt +++ b/Documentation/config/advice.txt @@ -42,7 +42,8 @@ advice.*:: state in the output of linkgit:git-status[1], in the template shown when writing commit messages in linkgit:git-commit[1], and in the help message shown - by linkgit:git-checkout[1] when switching branch. + by linkgit:git-switch[1] or + linkgit:git-checkout[1] when switching branch. statusUoption:: Advise to consider using the `-u` option to linkgit:git-status[1] when the command takes more than 2 seconds to enumerate untracked @@ -62,12 +63,14 @@ advice.*:: your information is guessed from the system username and domain name. detachedHead:: - Advice shown when you used linkgit:git-checkout[1] to - move to the detach HEAD state, to instruct how to create - a local branch after the fact. + Advice shown when you used + linkgit:git-switch[1] or linkgit:git-checkout[1] + to move to the detach HEAD state, to instruct how to + create a local branch after the fact. checkoutAmbiguousRemoteBranchName:: Advice shown when the argument to - linkgit:git-checkout[1] ambiguously resolves to a + linkgit:git-checkout[1] and linkgit:git-switch[1] + ambiguously resolves to a remote tracking branch on more than one remote in situations where an unambiguous argument would have otherwise caused a remote-tracking branch to be diff --git a/Documentation/config/branch.txt b/Documentation/config/branch.txt index 019d60ede2..8050466159 100644 --- a/Documentation/config/branch.txt +++ b/Documentation/config/branch.txt @@ -1,5 +1,5 @@ branch.autoSetupMerge:: - Tells 'git branch' and 'git checkout' to set up new branches + Tells 'git branch', 'git switch' and 'git checkout' to set up new branches so that linkgit:git-pull[1] will appropriately merge from the starting point branch. Note that even if this option is not set, this behavior can be chosen per-branch using the `--track` @@ -11,7 +11,7 @@ branch.autoSetupMerge:: branch. This option defaults to true. branch.autoSetupRebase:: - When a new branch is created with 'git branch' or 'git checkout' + When a new branch is created with 'git branch', 'git switch' or 'git checkout' that tracks another branch, this variable tells Git to set up pull to rebase instead of merge (see "branch.<name>.rebase"). When `never`, rebase is never automatically set to true. diff --git a/Documentation/config/checkout.txt b/Documentation/config/checkout.txt index c4118fa196..d6872ffa83 100644 --- a/Documentation/config/checkout.txt +++ b/Documentation/config/checkout.txt @@ -1,5 +1,6 @@ checkout.defaultRemote:: - When you run 'git checkout <something>' and only have one + When you run 'git checkout <something>' + or 'git switch <something>' and only have one remote, it may implicitly fall back on checking out and tracking e.g. 'origin/<something>'. This stops working as soon as you have more than one remote with a '<something>' @@ -8,8 +9,10 @@ checkout.defaultRemote:: disambiguation. The typical use-case is to set this to `origin`. + -Currently this is used by linkgit:git-checkout[1] when 'git checkout -<something>' will checkout the '<something>' branch on another remote, +Currently this is used by linkgit:git-switch[1] and +linkgit:git-checkout[1] when 'git checkout <something>' +or 'git switch <something>' +will checkout the '<something>' branch on another remote, and by linkgit:git-worktree[1] when 'git worktree add' refers to a remote branch. This setting might be used for other checkout-like commands or functionality in the future. diff --git a/Documentation/config/diff.txt b/Documentation/config/diff.txt index e48bb987d7..b3b304ee12 100644 --- a/Documentation/config/diff.txt +++ b/Documentation/config/diff.txt @@ -78,7 +78,8 @@ diff.external:: diff.ignoreSubmodules:: Sets the default value of --ignore-submodules. Note that this affects only 'git diff' Porcelain, and not lower level 'diff' - commands such as 'git diff-files'. 'git checkout' also honors + commands such as 'git diff-files'. 'git checkout' + and 'git switch' also honor this setting when reporting uncommitted changes. Setting it to 'all' disables the submodule summary normally shown by 'git commit' and 'git status' when `status.submoduleSummary` is set unless it is diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index 1b9d689933..ac355dc3f3 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -560,6 +560,10 @@ $ edit frotz $ git add frotz ------------ +SEE ALSO +-------- +linkgit:git-switch[1] + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-switch.txt b/Documentation/git-switch.txt new file mode 100644 index 0000000000..ff60ba69fb --- /dev/null +++ b/Documentation/git-switch.txt @@ -0,0 +1,259 @@ +git-switch(1) +============= + +NAME +---- +git-switch - Switch branches + +SYNOPSIS +-------- +[verse] +'git switch' [<options>] [--guess] <branch> +'git switch' [<options>] --detach [<start-point>] +'git switch' [<options>] (-c|-C|--orphan) <new-branch> [<start-point>] + +DESCRIPTION +----------- +Switch to a specified branch. The working tree and the index are +updated to match the branch. All new commits will be added to the tip +of this branch. + +Optionally a new branch could be created with either `-c` or `-C`, or +detach the working tree from any branch with `--detach`, along with +switching. + +Switching branches does not require a clean index and working tree +(i.e. no differences compared to 'HEAD'). The operation is aborted +however if the switch leads to loss of local changes, unless told +otherwise. + +OPTIONS +------- +<branch>:: + Branch to switch to. + +<new-branch>:: + Name for the new branch. + +<start-point>:: + The name of a commit at which to switch to before creating a + new branch or detach from. ++ +You can use the `"@{-N}"` syntax to refer to the N-th last +branch/commit switched to "git switch" or "git checkout" +operation. You may also specify `-` which is synonymous to `"@{-1}"`. ++ +As a special case, you may use `"A...B"` as a shortcut for the merge +base of `A` and `B` if there is exactly one merge base. You can leave +out at most one of `A` and `B`, in which case it defaults to `HEAD`. + +-c <new-branch>:: +--create <new-branch>:: + Create a new branch named `<new-branch>` starting at + `<start-point>` before switching to the branch. This is a + convenient shortcut for: ++ +------------ +$ git branch <new-branch> +$ git switch <new-branch> +------------ + +-C <new-branch>:: +--force-create <new-branch>:: + Similar to `--create` except that if `<new-branch>` already + exists, it will be reset to `<start-point>`. This is a + convenient shortcut for: ++ +------------ +$ git branch -f <new-branch> +$ git switch <new-branch> +------------ + +-d:: +--detach:: + Switch to a commit for inspection and discardable + experiments. See the "DETACHED HEAD" section in + linkgit:git-checkout[1] for details. + +-g:: +--guess:: + If `<branch>` is not found but there does exist a tracking + branch in exactly one remote (call it `<remote>`) with a + matching name, treat as equivalent to ++ +------------ +$ git switch -c <branch> --track <remote>/<branch> +------------ ++ +If the branch exists in multiple remotes and one of them is named by +the `checkout.defaultRemote` configuration variable, we'll use that +one for the purposes of disambiguation, even if the `<branch>` isn't +unique across all remotes. Set it to e.g. `checkout.defaultRemote=origin` +to always checkout remote branches from there if `<branch>` is +ambiguous but exists on the 'origin' remote. See also +`checkout.defaultRemote` in linkgit:git-config[1]. + +-q:: +--quiet:: + Quiet, suppress feedback messages. + +-f:: +--force:: + Proceed even if the index or the working tree differs from + HEAD. Both the index and working tree are restored to match + the switching target. This is used to throw away local + changes. + +--progress:: +--no-progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal, unless `--quiet` + is specified. This flag enables progress reporting even if not + attached to a terminal, regardless of `--quiet`. + +-t:: +--track:: + When creating a new branch, set up "upstream" configuration. + `-c` is implied. See "--track" in linkgit:git-branch[1] for + details. ++ +If no `-c` option is given, the name of the new branch will be derived +from the remote-tracking branch, by looking at the local part of the +refspec configured for the corresponding remote, and then stripping +the initial part up to the "*". This would tell us to use "hack" as +the local branch when branching off of "origin/hack" (or +"remotes/origin/hack", or even "refs/remotes/origin/hack"). If the +given name has no slash, or the above guessing results in an empty +name, the guessing is aborted. You can explicitly give a name with +`-c` in such a case. + +--no-track:: + Do not set up "upstream" configuration, even if the + branch.autoSetupMerge configuration variable is true. + +-m:: +--merge:: + If you have local modifications to one or more files that are + different between the current branch and the branch to which + you are switching, the command refuses to switch branches in + order to preserve your modifications in context. However, + with this option, a three-way merge between the current + branch, your working tree contents, and the new branch is + done, and you will be on the new branch. ++ +When a merge conflict happens, the index entries for conflicting +paths are left unmerged, and you need to resolve the conflicts +and mark the resolved paths with `git add` (or `git rm` if the merge +should result in deletion of the path). + +--conflict=<style>:: + The same as --merge option above, but changes the way the + conflicting hunks are presented, overriding the + merge.conflictStyle configuration variable. Possible values are + "merge" (default) and "diff3" (in addition to what is shown by + "merge" style, shows the original contents). + +--orphan <new-branch>:: + Create a new 'orphan' branch, named `<new-branch>`, started from + `<start-point>` and switch to it. See explanation of the same + option in linkgit:git-checkout[1] for details. + +--ignore-other-worktrees:: + `git switch` refuses when the wanted ref is already + checked out by another worktree. This option makes it check + the ref out anyway. In other words, the ref can be held by + more than one worktree. + +--recurse-submodules:: +--no-recurse-submodules:: + Using --recurse-submodules will update the content of all initialized + submodules according to the commit recorded in the superproject. If + local modifications in a submodule would be overwritten the checkout + will fail unless `-f` is used. If nothing (or --no-recurse-submodules) + is used, the work trees of submodules will not be updated. + Just like linkgit:git-submodule[1], this will detach the + submodules HEAD. + +EXAMPLES +-------- + +The following command switches to the "master" branch: + +------------ +$ git switch master +------------ + +After working in the wrong branch, switching to the correct branch +would be done using: + +------------ +$ git switch mytopic +------------ + +However, your "wrong" branch and correct "mytopic" branch may differ +in files that you have modified locally, in which case the above +switch would fail like this: + +------------ +$ git switch mytopic +error: You have local changes to 'frotz'; not switching branches. +------------ + +You can give the `-m` flag to the command, which would try a three-way +merge: + +------------ +$ git switch -m mytopic +Auto-merging frotz +------------ + +After this three-way merge, the local modifications are _not_ +registered in your index file, so `git diff` would show you what +changes you made since the tip of the new branch. + +To switch back to the previous branch before we switched to mytopic +(i.e. "master" branch): + +------------ +$ git switch - +------------ + +You can grow a new branch from any commit. For example, switch to +"HEAD~3" and create branch "fixup": + +------------ +$ git switch -c fixup HEAD~3 +Switched to a new branch 'fixup' +------------ + +If you want to start a new branch from a remote branch of the same +name, use `-g`: + +------------ +$ git switch -g new-topic +Branch 'new-topic' set up to track remote branch 'new-topic' from 'origin' +Switched to a new branch 'new-topic' +------------ + +To check out commit "HEAD~3" for temporary inspection or experiment +without creating a new branch: + +------------ +$ git switch --detach HEAD~3 +HEAD is now at 9fc9555312 Merge branch 'cc/shared-index-permbits' +------------ + +If it turns out whatever you have done is worth keeping, you can +always create a new name for it (without switching away): + +------------ +$ git switch -c good-surprises +------------ + +SEE ALSO +-------- +linkgit:git-checkout[1] + +GIT +--- +Part of the linkgit:git[1] suite diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index 9b41f81c06..cd0f9fa507 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -112,7 +112,8 @@ Checking-out and checking-in These attributes affect how the contents stored in the repository are copied to the working tree files when commands -such as 'git checkout' and 'git merge' run. They also affect how +such as 'git switch', 'git checkout' and 'git merge' run. +They also affect how Git stores the contents you prepare in the working tree in the repository upon 'git add' and 'git commit'. diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index 5bf653c111..8ff72f0613 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -165,12 +165,13 @@ rebased, and is not set when rebasing the current branch. post-checkout ~~~~~~~~~~~~~ -This hook is invoked when a linkgit:git-checkout[1] is run after having updated the +This hook is invoked when a linkgit:git-checkout[1] or +linkgit:git-switch[1] is run after having updated the worktree. The hook is given three parameters: the ref of the previous HEAD, the ref of the new HEAD (which may or may not have changed), and a flag indicating whether the checkout was a branch checkout (changing branches, flag=1) or a file checkout (retrieving a file from the index, flag=0). -This hook cannot affect the outcome of `git checkout`. +This hook cannot affect the outcome of `git switch` or `git checkout`. It is also run after linkgit:git-clone[1], unless the `--no-checkout` (`-n`) option is used. The first parameter given to the hook is the null-ref, the second the @@ -406,7 +407,8 @@ exit with a zero status. For example, the hook can simply run `git read-tree -u -m HEAD "$1"` in order to emulate `git fetch` that is run in the reverse direction with `git push`, as the two-tree form of `git read-tree -u -m` is -essentially the same as `git checkout` that switches branches while +essentially the same as `git switch` or `git checkout` +that switches branches while keeping the local changes in the working tree that do not interfere with the difference between the branches. diff --git a/Makefile b/Makefile index 148668368b..8e91db73ad 100644 --- a/Makefile +++ b/Makefile @@ -802,6 +802,7 @@ BUILT_INS += git-merge-subtree$X BUILT_INS += git-show$X BUILT_INS += git-stage$X BUILT_INS += git-status$X +BUILT_INS += git-switch$X BUILT_INS += git-whatchanged$X # what 'all' will build and 'install' will install in gitexecdir, diff --git a/builtin.h b/builtin.h index 6538932e99..c64e44450e 100644 --- a/builtin.h +++ b/builtin.h @@ -227,6 +227,7 @@ extern int cmd_show_index(int argc, const char **argv, const char *prefix); extern int cmd_status(int argc, const char **argv, const char *prefix); extern int cmd_stripspace(int argc, const char **argv, const char *prefix); extern int cmd_submodule__helper(int argc, const char **argv, const char *prefix); +extern int cmd_switch(int argc, const char **argv, const char *prefix); extern int cmd_symbolic_ref(int argc, const char **argv, const char *prefix); extern int cmd_tag(int argc, const char **argv, const char *prefix); extern int cmd_tar_tree(int argc, const char **argv, const char *prefix); diff --git a/builtin/checkout.c b/builtin/checkout.c index 7d23083282..1eff10dbef 100644 --- a/builtin/checkout.c +++ b/builtin/checkout.c @@ -34,6 +34,11 @@ static const char * const checkout_usage[] = { NULL, }; +static const char * const switch_branch_usage[] = { + N_("git switch [<options>] [<branch>]"), + NULL, +}; + struct checkout_opts { int patch_mode; int quiet; @@ -1411,33 +1416,25 @@ static struct option *add_checkout_path_options(struct checkout_opts *opts, return newopts; } -int cmd_checkout(int argc, const char **argv, const char *prefix) +static int checkout_main(int argc, const char **argv, const char *prefix, + struct checkout_opts *opts, struct option *options, + const char * const usagestr[]) { - struct checkout_opts real_opts; - struct checkout_opts *opts = &real_opts; struct branch_info new_branch_info; int dwim_remotes_matched = 0; int dwim_new_local_branch; - struct option *options = NULL; - memset(opts, 0, sizeof(*opts)); memset(&new_branch_info, 0, sizeof(new_branch_info)); opts->overwrite_ignore = 1; opts->prefix = prefix; opts->show_progress = -1; opts->overlay_mode = -1; - opts->no_dwim_new_local_branch = 0; git_config(git_checkout_config, opts); opts->track = BRANCH_TRACK_UNSPECIFIED; - options = parse_options_dup(options); - options = add_common_options(opts, options); - options = add_switch_branch_options(opts, options); - options = add_checkout_path_options(opts, options); - - argc = parse_options(argc, argv, prefix, options, checkout_usage, + argc = parse_options(argc, argv, prefix, options, usagestr, PARSE_OPT_KEEP_DASHDASH); dwim_new_local_branch = !opts->no_dwim_new_local_branch; @@ -1570,3 +1567,42 @@ int cmd_checkout(int argc, const char **argv, const char *prefix) return checkout_branch(opts, &new_branch_info); } } + +int cmd_checkout(int argc, const char **argv, const char *prefix) +{ + struct checkout_opts opts; + struct option *options = NULL; + int ret; + + memset(&opts, 0, sizeof(opts)); + opts.no_dwim_new_local_branch = 0; + + options = parse_options_dup(options); + options = add_common_options(&opts, options); + options = add_switch_branch_options(&opts, options); + options = add_checkout_path_options(&opts, options); + + ret = checkout_main(argc, argv, prefix, &opts, + options, checkout_usage); + FREE_AND_NULL(options); + return ret; +} + +int cmd_switch(int argc, const char **argv, const char *prefix) +{ + struct checkout_opts opts; + struct option *options = NULL; + int ret; + + memset(&opts, 0, sizeof(opts)); + opts.no_dwim_new_local_branch = 0; + + options = parse_options_dup(options); + options = add_common_options(&opts, options); + options = add_switch_branch_options(&opts, options); + + ret = checkout_main(argc, argv, prefix, &opts, + options, switch_branch_usage); + FREE_AND_NULL(options); + return ret; +} diff --git a/command-list.txt b/command-list.txt index 3a9af104b5..13317f47d4 100644 --- a/command-list.txt +++ b/command-list.txt @@ -171,6 +171,7 @@ git-status mainporcelain info git-stripspace purehelpers git-submodule mainporcelain git-svn foreignscminterface +git-switch mainporcelain history git-symbolic-ref plumbingmanipulators git-tag mainporcelain history git-unpack-file plumbinginterrogators diff --git a/git.c b/git.c index 2014aab6b8..39582cf511 100644 --- a/git.c +++ b/git.c @@ -573,6 +573,7 @@ static struct cmd_struct commands[] = { { "status", cmd_status, RUN_SETUP | NEED_WORK_TREE }, { "stripspace", cmd_stripspace }, { "submodule--helper", cmd_submodule__helper, RUN_SETUP | SUPPORT_SUPER_PREFIX | NO_PARSEOPT }, + { "switch", cmd_switch, RUN_SETUP | NEED_WORK_TREE }, { "symbolic-ref", cmd_symbolic_ref, RUN_SETUP }, { "tag", cmd_tag, RUN_SETUP | DELAY_PAGER_CONFIG }, { "unpack-file", cmd_unpack_file, RUN_SETUP | NO_PARSEOPT }, -- 2.21.0.rc1.337.gdf7f8d0522