Commit e14421b (Allow INSTALL, bindir, mandir to be set in main Makefile
- 2006-06-29) changed Documentation/Makefile to inherit the value of
mandir from the top-level Makefile when invoked as "make install-doc" at
the top-level. This was inherited by infodir and htmldir when they were
added.
This was broken by commit 026fa0d (Move computation of absolute paths
from Makefile to runtime (in preparation for RUNTIME_PREFIX) -
2009-01-18) which changed these variables to have relative paths in the
top-level Makefile, causing the documentation to be installed into the
path without $(prefix) prepended.
Fix this by changing the defaults to be paths relative to $(prefix) and
introducing new variables {html,info,man}_instdir which contain the full
installation paths.
Signed-off-by: John Keeping <[email protected]>
---
I'm not sure if this is the best approach - the alternative would be to
change the top-level Makefile to use {html,info,man}dir_relative and
derive the {html,info,man}dir variables from that.
The top-level Makefile is inconsistent in the approach it takes - bindir
is derived from bindir_relative but gitexecdir and template_dir have
gitexec_instdir and template_instdir derived from them.
Documentation/Makefile | 56 +++++++++++++++++++++++++++++++++++---------------
1 file changed, 40 insertions(+), 16 deletions(-)
diff --git a/Documentation/Makefile b/Documentation/Makefile
index 0cfdc36..34cd9f2 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -78,15 +78,21 @@ DOC_MAN1 = $(patsubst %.txt,%.1,$(MAN1_TXT))
DOC_MAN5 = $(patsubst %.txt,%.5,$(MAN5_TXT))
DOC_MAN7 = $(patsubst %.txt,%.7,$(MAN7_TXT))
+# The following variables can be relative paths due to the way they can be
+# inherited from the top-level Makefile:
+# htmldir
+# infodir
+# mandir
+# Note that pdfdir is an exception to this since it is not used by git-help.
prefix ?= $(HOME)
bindir ?= $(prefix)/bin
-htmldir ?= $(prefix)/share/doc/git-doc
-infodir ?= $(prefix)/share/info
pdfdir ?= $(prefix)/share/doc/git-doc
-mandir ?= $(prefix)/share/man
-man1dir = $(mandir)/man1
-man5dir = $(mandir)/man5
-man7dir = $(mandir)/man7
+htmldir ?= share/doc/git-doc
+infodir ?= share/info
+mandir ?= share/man
+man1dir = $(man_instdir)/man1
+man5dir = $(man_instdir)/man5
+man7dir = $(man_instdir)/man7
# DESTDIR =
ASCIIDOC = asciidoc
@@ -110,6 +116,24 @@ endif
-include ../config.mak.autogen
-include ../config.mak
+ifneq ($(filter /%,$(firstword $(htmldir))),)
+html_instdir = $(htmldir)
+else
+html_instdir = $(prefix)/$(htmldir)
+endif
+
+ifneq ($(filter /%,$(firstword $(infodir))),)
+info_instdir = $(infodir)
+else
+info_instdir = $(prefix)/$(infodir)
+endif
+
+ifneq ($(filter /%,$(firstword $(mandir))),)
+man_instdir = $(mandir)
+else
+man_instdir = $(prefix)/$(mandir)
+endif
+
#
# For docbook-xsl ...
# -1.68.1, no extra settings are needed?
@@ -144,7 +168,7 @@ endif
# Distros may want to use MAN_BASE_URL=file:///path/to/git/docs/
# or similar.
ifndef MAN_BASE_URL
-MAN_BASE_URL = file://$(htmldir)/
+MAN_BASE_URL = file://$(html_instdir)/
endif
XMLTO_EXTRA += -m manpage-base-url.xsl
@@ -220,13 +244,13 @@ install-man: man
$(INSTALL) -m 644 $(DOC_MAN7) $(DESTDIR)$(man7dir)
install-info: info
- $(INSTALL) -d -m 755 $(DESTDIR)$(infodir)
- $(INSTALL) -m 644 git.info gitman.info $(DESTDIR)$(infodir)
- if test -r $(DESTDIR)$(infodir)/dir; then \
- $(INSTALL_INFO) --info-dir=$(DESTDIR)$(infodir) git.info ;\
- $(INSTALL_INFO) --info-dir=$(DESTDIR)$(infodir) gitman.info ;\
+ $(INSTALL) -d -m 755 $(DESTDIR)$(info_instdir)
+ $(INSTALL) -m 644 git.info gitman.info $(DESTDIR)$(info_instdir)
+ if test -r $(DESTDIR)$(info_instdir)/dir; then \
+ $(INSTALL_INFO) --info-dir=$(DESTDIR)$(info_instdir) git.info ;\
+ $(INSTALL_INFO) --info-dir=$(DESTDIR)$(info_instdir) gitman.info ;\
else \
- echo "No directory found in $(DESTDIR)$(infodir)" >&2 ; \
+ echo "No directory found in $(DESTDIR)$(info_instdir)" >&2 ; \
fi
install-pdf: pdf
@@ -234,7 +258,7 @@ install-pdf: pdf
$(INSTALL) -m 644 user-manual.pdf $(DESTDIR)$(pdfdir)
install-html: html
- '$(SHELL_PATH_SQ)' ./install-webdoc.sh $(DESTDIR)$(htmldir)
+ '$(SHELL_PATH_SQ)' ./install-webdoc.sh $(DESTDIR)$(html_instdir)
../GIT-VERSION-FILE: FORCE
$(QUIET_SUBDIR0)../ $(QUIET_SUBDIR1) GIT-VERSION-FILE
@@ -402,14 +426,14 @@ require-manrepo::
then echo "git-manpages repository must exist at $(MAN_REPO)"; exit 1;
fi
quick-install-man: require-manrepo
- '$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(MAN_REPO)
$(DESTDIR)$(mandir)
+ '$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(MAN_REPO)
$(DESTDIR)$(man_instdir)
require-htmlrepo::
@if test ! -d $(HTML_REPO); \
then echo "git-htmldocs repository must exist at $(HTML_REPO)"; exit 1;
fi
quick-install-html: require-htmlrepo
- '$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(HTML_REPO)
$(DESTDIR)$(htmldir)
+ '$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(HTML_REPO)
$(DESTDIR)$(html_instdir)
print-man1:
@for i in $(MAN1_TXT); do echo $$i; done
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
