From: James Coglan <jcog...@gmail.com>
Following the introduction of "left-skewed" merges, which are merges
whose first parent fuses with another edge to its left, we have some
more edge cases to deal with in the display of commit and post-merge
lines.
The current graph code handles the following cases for edges appearing
to the right of the commit (*) on commit lines. A 2-way merge is usually
followed by vertical lines:
| | |
| * |
| |\ \
An octopus merge (more than two parents) is always followed by edges
sloping to the right:
| | \ | | \
| *-. \ | *---. \
| |\ \ \ | |\ \ \ \
A 2-way merge is followed by a right-sloping edge if the commit line
immediately follows a post-merge line for a commit that appears in the
same column as the current commit, or any column to the left of that:
| * | * |
| |\ | |\ \
| * \ | | * \
| |\ \ | | |\ \
This commit introduces the following new cases for commit lines. If a
2-way merge skews to the left, then the edges to its right are always
vertical lines, even if the commit follows a post-merge line:
| | | | |\
| * | | * |
|/| | |/| |
A commit with 3 parents that skews left is followed by vertical edges:
| | |
| * |
|/|\ \
If a 3-way left-skewed merge commit appears immediately after a
post-merge line, then it may be followed the right-sloping edges, just
like a 2-way merge that is not skewed.
| |\
| * \
|/|\ \
Octopus merges with 4 or more parents that skew to the left will always
be followed by right-sloping edges, because the existing columns need to
expand around the merge.
| | \
| *-. \
|/|\ \ \
On post-merge lines, usually all edges following the current commit
slope to the right:
| * | |
| |\ \ \
However, if the commit is a left-skewed 2-way merge, the edges to its
right remain vertical. We also need to display a space after the
vertical line descending from the commit marker, whereas this line would
normally be followed by a backslash.
| * | |
|/| | |
If a left-skewed merge has more than 2 parents, then the edges to its
right are still sloped as they bend around the edges introduced by the
merge.
| * | |
|/|\ \ \
To handle these new cases, we need to know not just how many parents
each commit has, but how many new columns it adds to the display; this
quantity is recorded in the `edges_added` field for the current commit,
and `prev_edges_added` field for the previous commit.
Here, "column" refers to visual columns, not the logical columns of the
`columns` array. This is because even if all the commit's parents end up
fusing with existing edges, they initially introduce distinct edges in
the commit and post-merge lines before those edges collapse. For
example, a 3-way merge whose 2nd and 3rd parents fuse with existing
edges still introduces 2 visual columns that affect the display of edges
to their right.
| | | \
| | *-. \
| | |\ \ \
| |_|/ / /
|/| | / /
| | |/ /
| |/| |
| | | |
This merge does not introduce any *logical* columns; there are 4 edges
before and after this commit once all edges have collapsed. But it does
initially introduce 2 new edges that need to be accommodated by the
edges to their right.
Signed-off-by: James Coglan <jcog...@gmail.com>
---
graph.c | 63 +++++++++++++--
t/t4215-log-skewed-merges.sh | 151 +++++++++++++++++++++++++++++++++++
2 files changed, 209 insertions(+), 5 deletions(-)
diff --git a/graph.c b/graph.c
index 9136173e03..fb2e42850f 100644
--- a/graph.c
+++ b/graph.c
@@ -197,6 +197,46 @@ struct git_graph {
* |/| | | | | | | | | | *
*/
int merge_layout;
+ /*
+ * The number of columns added to the graph by the current commit. For
+ * 2-way and octopus merges, this is is usually one less than the
+ * number of parents:
+ *
+ * | | | | | \
+ * | * | | *---. \
+ * | |\ \ | |\ \ \ \
+ * | | | | | | | | | |
+ *
+ * num_parents: 2 num_parents: 4
+ * edges_added: 1 edges_added: 3
+ *
+ * For left-skewed merges, the first parent fuses with its neighbor and
+ * so one less column is added:
+ *
+ * | | | | | \
+ * | * | | *-. \
+ * |/| | |/|\ \ \
+ * | | | | | | | |
+ *
+ * num_parents: 2 num_parents: 4
+ * edges_added: 0 edges_added: 2
+ *
+ * This number determines how edges to the right of the merge are
+ * displayed in commit and post-merge lines; if no columns have been
+ * added then a vertical line should be used where a right-tracking
+ * line would otherwise be used.
+ *
+ * | * \ | * |
+ * | |\ \ |/| |
+ * | | * \ | * |
+ */
+ int edges_added;
+ /*
+ * The number of columns added by the previous commit, which is used to
+ * smooth edges appearing to the right of a commit in a commit line
+ * following a post-merge line.
+ */
+ int prev_edges_added;
/*
* The maximum number of columns that can be stored in the columns
* and new_columns arrays. This is also half the number of entries
@@ -309,6 +349,8 @@ struct git_graph *graph_init(struct rev_info *opt)
graph->commit_index = 0;
graph->prev_commit_index = 0;
graph->merge_layout = 0;
+ graph->edges_added = 0;
+ graph->prev_edges_added = 0;
graph->num_columns = 0;
graph->num_new_columns = 0;
graph->mapping_size = 0;
@@ -670,6 +712,9 @@ void graph_update(struct git_graph *graph, struct commit
*commit)
*/
graph_update_columns(graph);
+ graph->prev_edges_added = graph->edges_added;
+ graph->edges_added = graph->num_parents + graph->merge_layout - 2;
+
graph->expansion_row = 0;
/*
@@ -943,12 +988,13 @@ static void graph_output_commit_line(struct git_graph
*graph, struct strbuf *sb)
if (graph->num_parents > 2)
graph_draw_octopus_merge(graph, sb);
- } else if (seen_this && (graph->num_parents > 2)) {
+ } else if (seen_this && (graph->edges_added > 1)) {
strbuf_write_column(sb, col, '\\');
- } else if (seen_this && (graph->num_parents == 2)) {
+ } else if (seen_this && (graph->edges_added == 1)) {
/*
- * This is a 2-way merge commit.
- * There is no GRAPH_PRE_COMMIT stage for 2-way
+ * This is either a right-skewed 2-way merge
+ * commit, or a left-skewed 3-way merge.
+ * There is no GRAPH_PRE_COMMIT stage for such
* merges, so this is the first line of output
* for this commit. Check to see what the previous
* line of output was.
@@ -960,6 +1006,7 @@ static void graph_output_commit_line(struct git_graph
*graph, struct strbuf *sb)
* makes the output look nicer.
*/
if (graph->prev_state == GRAPH_POST_MERGE &&
+ graph->prev_edges_added > 0 &&
graph->prev_commit_index < i)
strbuf_write_column(sb, col, '\\');
else
@@ -1031,8 +1078,14 @@ static void graph_output_post_merge_line(struct
git_graph *graph, struct strbuf
else
idx++;
}
+ if (graph->edges_added == 0)
+ strbuf_addch(sb, ' ');
+
} else if (seen_this) {
- strbuf_write_column(sb, col, '\\');
+ if (graph->edges_added > 0)
+ strbuf_write_column(sb, col, '\\');
+ else
+ strbuf_write_column(sb, col, '|');
strbuf_addch(sb, ' ');
} else {
strbuf_write_column(sb, col, '|');
diff --git a/t/t4215-log-skewed-merges.sh b/t/t4215-log-skewed-merges.sh
index cfaba40f97..e479d6e676 100755
--- a/t/t4215-log-skewed-merges.sh
+++ b/t/t4215-log-skewed-merges.sh
@@ -39,4 +39,155 @@ test_expect_success 'log --graph with left-skewed merge' '
test_cmp expect actual
'
+test_expect_success 'setup nested left-skewed merge' '
+ git checkout --orphan 1_p &&
+ test_commit 1_A &&
+ test_commit 1_B &&
+ test_commit 1_C &&
+ git checkout -b 1_q @^ && test_commit 1_D &&
+ git checkout 1_p && git merge --no-ff 1_q -m 1_E &&
+ git checkout -b 1_r @~3 && test_commit 1_F &&
+ git checkout 1_p && git merge --no-ff 1_r -m 1_G &&
+ git checkout @^^ && git merge --no-ff 1_p -m 1_H
+'
+
+cat > expect <<\EOF
+* 1_H
+|\
+| * 1_G
+| |\
+| | * 1_F
+| * | 1_E
+|/| |
+| * | 1_D
+* | | 1_C
+|/ /
+* | 1_B
+|/
+* 1_A
+EOF
+
+test_expect_success 'log --graph with nested left-skewed merge' '
+ git log --graph --pretty=tformat:%s | sed "s/ *$//" > actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'setup nested left-skewed merge following normal merge' '
+ git checkout --orphan 2_p &&
+ test_commit 2_A &&
+ test_commit 2_B &&
+ test_commit 2_C &&
+ git checkout -b 2_q @^^ &&
+ test_commit 2_D &&
+ test_commit 2_E &&
+ git checkout -b 2_r @^ && test_commit 2_F &&
+ git checkout 2_q &&
+ git merge --no-ff 2_r -m 2_G &&
+ git merge --no-ff 2_p^ -m 2_H &&
+ git checkout -b 2_s @^^ && git merge --no-ff 2_q -m 2_J &&
+ git checkout 2_p && git merge --no-ff 2_s -m 2_K
+'
+
+cat > expect <<\EOF
+* 2_K
+|\
+| * 2_J
+| |\
+| | * 2_H
+| | |\
+| | * | 2_G
+| |/| |
+| | * | 2_F
+| * | | 2_E
+| |/ /
+| * | 2_D
+* | | 2_C
+| |/
+|/|
+* | 2_B
+|/
+* 2_A
+EOF
+
+test_expect_success 'log --graph with nested left-skewed merge following
normal merge' '
+ git log --graph --pretty=tformat:%s | sed "s/ *$//" > actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'setup nested right-skewed merge following left-skewed
merge' '
+ git checkout --orphan 3_p &&
+ test_commit 3_A &&
+ git checkout -b 3_q &&
+ test_commit 3_B &&
+ test_commit 3_C &&
+ git checkout -b 3_r @^ &&
+ test_commit 3_D &&
+ git checkout 3_q && git merge --no-ff 3_r -m 3_E &&
+ git checkout 3_p && git merge --no-ff 3_q -m 3_F &&
+ git checkout 3_r && test_commit 3_G &&
+ git checkout 3_p && git merge --no-ff 3_r -m 3_H &&
+ git checkout @^^ && git merge --no-ff 3_p -m 3_J
+'
+
+cat > expect <<\EOF
+* 3_J
+|\
+| * 3_H
+| |\
+| | * 3_G
+| * | 3_F
+|/| |
+| * | 3_E
+| |\ \
+| | |/
+| | * 3_D
+| * | 3_C
+| |/
+| * 3_B
+|/
+* 3_A
+EOF
+
+test_expect_success 'log --graph with nested right-skewed merge following
left-skewed merge' '
+ git log --graph --pretty=tformat:%s | sed "s/ *$//" > actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'setup right-skewed merge following a left-skewed one' '
+ git checkout --orphan 4_p &&
+ test_commit 4_A &&
+ test_commit 4_B &&
+ test_commit 4_C &&
+ git checkout -b 4_q @^^ && test_commit 4_D &&
+ git checkout -b 4_r 4_p^ && git merge --no-ff 4_q -m 4_E &&
+ git checkout -b 4_s 4_p^^ &&
+ git merge --no-ff 4_r -m 4_F &&
+ git merge --no-ff 4_p -m 4_G &&
+ git checkout @^^ && git merge --no-ff 4_s -m 4_H
+'
+
+cat > expect <<\EOF
+* 4_H
+|\
+| * 4_G
+| |\
+| * | 4_F
+|/| |
+| * | 4_E
+| |\ \
+| | * | 4_D
+| |/ /
+|/| |
+| | * 4_C
+| |/
+| * 4_B
+|/
+* 4_A
+EOF
+
+test_expect_success 'log --graph with right-skewed merge following a
left-skewed one' '
+ git log --graph --date-order --pretty=tformat:%s | sed "s/ *$//" >
actual &&
+ test_cmp expect actual
+'
+
test_done
--
gitgitgadget
