Sorry for the double-send. public-inbox and MARC both showed that
only 3 messages got through the in the first send so I sent it again.
Seems to have gotten through find the second time around.
On Fri, Oct 18, 2019 at 03:04:03PM -0700, Denton Liu wrote:
> Like earlier patchsets, I want to implement a feature that involves
> modifications to the test suite. Since that feature will probably take a
> while to polish up, however, let's clean up the test suite in a separate
> patchset first so it's not blocked by the feature work.
>
> 1/15 is a cleanup to an unrelated test that I found while addressing
> some of Eric's comments.
>
> 2/15 is a general improvement to test_rev_cmp() that will be used later
> in the series.
>
> Changes since v1:
>
> * Incorporate Eric's feedback
>
> Denton Liu (15):
> t7408: replace `test_must_fail test_path_is_file`
> t: teach test_cmp_rev to accept ! for not-equals
> t5520: improve test style
> t5520: use sq for test case names
> t5520: let sed open its own input
> t5520: replace test -f with test-lib functions
> t5520: remove spaces after redirect operator
> t5520: use test_line_count where possible
> t5520: replace test -{n,z} with test-lib functions
> t5520: use test_cmp_rev where possible
> t5520: test single-line files by git with test_cmp
> t5520: don't put git in upstream of pipe
> t5520: replace subshell cat comparison with test_cmp
> t5520: remove redundant lines in test cases
> t5520: replace `! git` with `test_must_fail git`
>
> t/t2400-worktree-add.sh | 4 +-
> t/t3400-rebase.sh | 2 +-
> t/t3421-rebase-topology-linear.sh | 6 +-
> t/t3430-rebase-merges.sh | 2 +-
> t/t3432-rebase-fast-forward.sh | 2 +-
> t/t3501-revert-cherry-pick.sh | 2 +-
> t/t3508-cherry-pick-many-commits.sh | 2 +-
> t/t5520-pull.sh | 343 +++++++++++++++++-----------
> t/t7408-submodule-reference.sh | 2 +-
> t/test-lib-functions.sh | 13 +-
> 10 files changed, 227 insertions(+), 151 deletions(-)
>
> Range-diff against v1:
> -: ---------- > 1: 987fee4652 t7408: replace `test_must_fail
> test_path_is_file`
> -: ---------- > 2: 417e808466 t: teach test_cmp_rev to accept ! for
> not-equals
> 1: 0bc54dd330 = 3: 0a56980857 t5520: improve test style
> 2: a5dee82ecc = 4: dfa89ba1cb t5520: use sq for test case names
> 3: 58cc2fcda3 = 5: 9fac3dff83 t5520: let sed open its own input
> 4: d2946208d3 ! 6: c6ca45eb17 t5520: replace test -f with
> test_path_is_file
> @@ Metadata
> Author: Denton Liu <liu.den...@gmail.com>
>
> ## Commit message ##
> - t5520: replace test -f with test_path_is_file
> + t5520: replace test -f with test-lib functions
>
> Although `test -f` has the same functionality as
> test_path_is_file(), in
> the case where test_path_is_file() fails, we get much better
> debugging
> - information. Replace `test -f` with test_path_is_file so that future
> - developers will have a better experience debugging these test cases.
> + information.
> +
> + Replace `test -f` with test_path_is_file() so that future developers
> + will have a better experience debugging these test cases.
> +
> + Also, in the case of `! test -f`, not only should that path not be a
> + file, it shouldn't exist at all so replace it with
> + test_path_is_missing().
>
> Signed-off-by: Denton Liu <liu.den...@gmail.com>
>
> @@ t/t5520-pull.sh: test_expect_success 'pulling into void must not
> create an octop
> cd cloned-octopus &&
> test_must_fail git pull .. master master &&
> - ! test -f file
> -+ test_must_fail test_path_is_file file
> ++ test_path_is_missing file
> )
> '
>
> 5: 5b4c1dd291 = 7: 830a8212ae t5520: remove spaces after redirect operator
> 6: 26fea15950 = 8: 3d982230be t5520: use test_line_count where possible
> 7: 3fc0354c9c ! 9: 2bca4f046d t5520: replace test -{n,z} with test-lib
> functions
> @@ Metadata
> ## Commit message ##
> t5520: replace test -{n,z} with test-lib functions
>
> + When wrapping a Git command in a subshell within another command, we
> + throw away the Git command's exit code. In case the Git command
> fails,
> + we would like to know about it rather than the failure being silent.
> + Extract Git commands so that their exit codes are not lost.
> +
> Instead of using `test -n` or `test -z`, replace them respectively
> with
> - invocations of test_file_not_empty() and test_must_be_empty().
> + invocations of test_file_not_empty() and test_must_be_empty() so
> that we
> + get better debugging information in the case of a failure.
>
> Signed-off-by: Denton Liu <liu.den...@gmail.com>
>
> 8: f4eb80c9ac ! 10: 1a54db1d5c t5520: use test_cmp_rev where possible
> @@ Commit message
>
> s/test "$(git rev-parse.* \([^)]*\))" = "$(git rev-parse
> \([^)]*\))"/test_cmp_rev \1 \2/
> s/test \([^ ]*\) = "$(git rev-parse.*
> \([^)]*\))"/test_cmp_rev \1 \2/
> - s/test "$(git rev-parse.* \([^)]*\))" != "$(git rev-parse.*
> \([^)]*\))"/test_must_fail test_cmp_rev \1 \2/
> - s/test \([^ ]*\) != "$(git rev-parse.*
> \([^)]*\))"/test_must_fail test_cmp_rev \1 \2/
> + s/test "$(git rev-parse.* \([^)]*\))" != "$(git rev-parse.*
> \([^)]*\))"/test_cmp_rev ! \1 \2/
> + s/test \([^ ]*\) != "$(git rev-parse.*
> \([^)]*\))"/test_cmp_rev ! \1 \2/
>
> Signed-off-by: Denton Liu <liu.den...@gmail.com>
>
> @@ t/t5520-pull.sh: test_expect_success 'branch.to-rebase.rebase should
> override pu
> test_config branch.to-rebase.rebase false &&
> git pull . copy &&
> - test "$(git rev-parse HEAD^)" != "$(git rev-parse copy)" &&
> -+ test_must_fail test_cmp_rev HEAD^ copy &&
> ++ test_cmp_rev ! HEAD^ copy &&
> test new = "$(git show HEAD:file2)"
> '
>
> @@ t/t5520-pull.sh: test_expect_success 'pull --rebase dies early with
> dirty workin
> git checkout HEAD -- file &&
> git pull &&
> - test "$COPY" != "$(git rev-parse --verify me/copy)"
> -+ test_must_fail test_cmp_rev "$COPY" me/copy
> ++ test_cmp_rev ! "$COPY" me/copy
> '
>
> test_expect_success 'pull --rebase works on branch yet to be born' '
> 9: bd3ec4239c ! 11: 52cf4f0d0f t5520: test single-line files by git with
> test_cmp
> @@ Commit message
> s/\(\s*\)test \([^ ]*\) = "$(\(git [^)]*\))"/\1echo \2
> >expect \&\&\n\1\3 >actual \&\&\n\1test_cmp expect actual/
> s/\(\s*\)test "$(\(git [^)]*\))" = \([^ ]*\)/\1echo \3
> >expect \&\&\n\1\2 >actual \&\&\n\1test_cmp expect actual/
>
> + A future patch will clean up situations where we have multiple
> duplicate
> + statements within a test case. This is done to keep this patch purely
> + mechanical.
> +
> Signed-off-by: Denton Liu <liu.den...@gmail.com>
>
> ## t/t5520-pull.sh ##
> @@ t/t5520-pull.sh: test_expect_success 'branch.to-rebase.rebase' '
> @@ t/t5520-pull.sh: test_expect_success 'branch.to-rebase.rebase should
> override pull.rebase' '
> test_config branch.to-rebase.rebase false &&
> git pull . copy &&
> - test_must_fail test_cmp_rev HEAD^ copy &&
> + test_cmp_rev ! HEAD^ copy &&
> - test new = "$(git show HEAD:file2)"
> + echo new >expect &&
> + git show HEAD:file2 >actual &&
> 10: 61b4df0f7c = 12: 0cfabb201c t5520: don't put git in upstream of pipe
> 11: f3429bbb57 ! 13: b2d0ce21c8 t5520: replace subshell cat comparison with
> test_cmp
> @@ Commit message
> s/\(\s*\)test \([^=]*\)= "$(cat \([^)]*\))"/\1echo \2>expect
> \&\&\n\1test_cmp expect \3/
> s/\(\s*\)test "$(cat \([^)]*\))" = \([^&]*\)\(
> &&\)\?$/\1echo \3 >expect \&\&\n\1test_cmp expect \2\4/
>
> + A future patch will clean up situations where we have multiple
> duplicate
> + statements within a test case. This is done to keep this patch purely
> + mechanical.
> +
> Signed-off-by: Denton Liu <liu.den...@gmail.com>
>
> ## t/t5520-pull.sh ##
> -: ---------- > 14: 5aac40a029 t5520: remove redundant lines in test cases
> 12: 3e6c591b2b = 15: 2c0d3ac416 t5520: replace `! git` with `test_must_fail
> git`
> --
> 2.23.0.897.g0a19638b1e
>
