Allow better control of the set of tests that will be executed for a
single test suite. Mostly useful while debugging or developing as it
allows to focus on a specific test.
Signed-off-by: Ilya Bobyr <ilya.bo...@gmail.com>
---
A number of minor changes according to the review comments.
t/README | 81 ++++++++++++-
t/t0000-basic.sh | 356 +++++++++++++++++++++++++++++++++++++++++++++++++++++-
t/test-lib.sh | 108 ++++++++++++++++
3 files changed, 537 insertions(+), 8 deletions(-)
diff --git a/t/README b/t/README
index eaf6ecd..cd99d21 100644
--- a/t/README
+++ b/t/README
@@ -104,6 +104,12 @@ appropriately before running "make".
This causes additional long-running tests to be run (where
available), for more exhaustive testing.
+-r::
+--run=<test-selector>::
+ Run only the subset of tests indicated by
+ <test-selector>. See section "Skipping Tests" below for
+ <test-selector> syntax.
+
--valgrind=<tool>::
Execute all Git binaries under valgrind tool <tool> and exit
with status 126 on errors (just like regular tests, this will
@@ -191,10 +197,77 @@ and either can match the "t[0-9]{4}" part to skip the
whole
test, or t[0-9]{4} followed by ".$number" to say which
particular test to skip.
-Note that some tests in the existing test suite rely on previous
-test item, so you cannot arbitrarily disable one and expect the
-remainder of test to check what the test originally was intended
-to check.
+For an individual test suite --run could be used to specify that
+only some tests should be run or that some tests should be
+excluded from a run.
+
+The argument for --run is a list of individual test numbers or
+ranges with an optional negation prefix that define what tests in
+a test suite to include in the run. A range is two numbers
+separated with a dash and matches a range of tests with both ends
+been included. You may omit the first or the second number to
+mean "from the first test" or "up to the very last test"
+respectively.
+
+Optional prefix of '!' means that the test or a range of tests
+should be excluded from the run.
+
+If --run starts with an unprefixed number or range the initial
+set of tests to run is empty. If the first item starts with '!'
+all the tests are added to the initial set. After initial set is
+determined every test number or range is added or excluded from
+the set one by one, from left to right.
+
+Individual numbers or ranges could be separated either by a space
+or a comma.
+
+For example, to run only tests up to a specific test (21), one
+could do this:
+
+ $ sh ./t9200-git-cvsexport-commit.sh --run='1-21'
+
+or this:
+
+ $ sh ./t9200-git-cvsexport-commit.sh --run='-21'
+
+Common case is to run several setup tests (1, 2, 3) and then a
+specific test (21) that relies on that setup:
+
+ $ sh ./t9200-git-cvsexport-commit.sh --run='1 2 3 21'
+
+or:
+
+ $ sh ./t9200-git-cvsexport-commit.sh --run=1,2,3,21
+
+or:
+
+ $ sh ./t9200-git-cvsexport-commit.sh --run='-3 21'
+
+As noted above, the test set is built going though items left to
+right, so this:
+
+ $ sh ./t9200-git-cvsexport-commit.sh --run='1-4 !3'
+
+will run tests 1, 2, and 4. Items that comes later have higher
+precendence. It means that this:
+
+ $ sh ./t9200-git-cvsexport-commit.sh --run='!3 1-4'
+
+would just run tests from 1 to 4, including 3.
+
+You may use negation with ranges. The following will run all
+test in the test suite except from 7 up to 11:
+
+ $ sh ./t9200-git-cvsexport-commit.sh --run='!7-11'
+
+Some tests in a test suite rely on the previous tests performing
+certain actions, specifically some tests are designated as
+"setup" test, so you cannot _arbitrarily_ disable one test and
+expect the rest to function correctly.
+
+--run is mostly useful when you want to focus on a specific test
+and know what setup is needed for it. Or when you want to run
+everything up to a certain test.
Naming Tests
diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh
index ae8874e..8345c8a 100755
--- a/t/t0000-basic.sh
+++ b/t/t0000-basic.sh
@@ -42,9 +42,9 @@ test_expect_success 'success is reported like this' '
:
'
-run_sub_test_lib_test () {
- name="$1" descr="$2" # stdin is the body of the test code
- shift 2
+_run_sub_test_lib_test_common () {
+ neg="$1" name="$2" descr="$3" # stdin is the body of the test code
+ shift 3
mkdir "$name" &&
(
# Pretend we're not running under a test harness, whether we
@@ -70,10 +70,23 @@ run_sub_test_lib_test () {
export TEST_DIRECTORY &&
TEST_OUTPUT_DIRECTORY=$(pwd) &&
export TEST_OUTPUT_DIRECTORY &&
- ./"$name.sh" "$@" >out 2>err
+ if test -z "$neg"
+ then
+ ./"$name.sh" "$@" >out 2>err
+ else
+ ! ./"$name.sh" "$@" >out 2>err
+ fi
)
}
+run_sub_test_lib_test () {
+ _run_sub_test_lib_test_common '' "$@"
+}
+
+run_sub_test_lib_test_err () {
+ _run_sub_test_lib_test_common '!' "$@"
+}
+
check_sub_test_lib_test () {
name="$1" # stdin is the expected output from the test
(
@@ -84,6 +97,18 @@ check_sub_test_lib_test () {
)
}
+check_sub_test_lib_test_err () {
+ name="$1" # stdin is the expected output output from the test
+ # expected error output is in descriptior 3
+ (
+ cd "$name" &&
+ sed -e 's/^> //' -e 's/Z$//' >expect.out &&
+ test_cmp expect.out out &&
+ sed -e 's/^> //' -e 's/Z$//' <&3 >expect.err &&
+ test_cmp expect.err err
+ )
+}
+
test_expect_success 'pretend we have a fully passing test suite' "
run_sub_test_lib_test full-pass '3 passing tests' <<-\\EOF &&
for i in 1 2 3
@@ -333,6 +358,329 @@ test_expect_success 'GIT_SKIP_TESTS sh pattern' "
EOF
"
+test_expect_success '--run basic' "
+ run_sub_test_lib_test run-basic \
+ '--run basic' --run='1 3 5' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-basic <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 # skip passing test #2 (--run)
+ > ok 3 - passing test #3
+ > ok 4 # skip passing test #4 (--run)
+ > ok 5 - passing test #5
+ > ok 6 # skip passing test #6 (--run)
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run with a range' "
+ run_sub_test_lib_test run-range \
+ '--run with a range' --run='1-3' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-range <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 - passing test #2
+ > ok 3 - passing test #3
+ > ok 4 # skip passing test #4 (--run)
+ > ok 5 # skip passing test #5 (--run)
+ > ok 6 # skip passing test #6 (--run)
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run with two ranges' "
+ run_sub_test_lib_test run-two-ranges \
+ '--run with two ranges' --run='1-2 5-6' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-two-ranges <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 - passing test #2
+ > ok 3 # skip passing test #3 (--run)
+ > ok 4 # skip passing test #4 (--run)
+ > ok 5 - passing test #5
+ > ok 6 - passing test #6
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run with a left open range' "
+ run_sub_test_lib_test run-left-open-range \
+ '--run with a left open range' --run='-3' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-left-open-range <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 - passing test #2
+ > ok 3 - passing test #3
+ > ok 4 # skip passing test #4 (--run)
+ > ok 5 # skip passing test #5 (--run)
+ > ok 6 # skip passing test #6 (--run)
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run with a right open range' "
+ run_sub_test_lib_test run-right-open-range \
+ '--run with a right open range' --run='4-' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-right-open-range <<-\\EOF
+ > ok 1 # skip passing test #1 (--run)
+ > ok 2 # skip passing test #2 (--run)
+ > ok 3 # skip passing test #3 (--run)
+ > ok 4 - passing test #4
+ > ok 5 - passing test #5
+ > ok 6 - passing test #6
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run with basic negation' "
+ run_sub_test_lib_test run-basic-neg \
+ '--run with basic negation' --run='"'!3'"' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-basic-neg <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 - passing test #2
+ > ok 3 # skip passing test #3 (--run)
+ > ok 4 - passing test #4
+ > ok 5 - passing test #5
+ > ok 6 - passing test #6
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run with two negations' "
+ run_sub_test_lib_test run-two-neg \
+ '--run with two negations' --run='"'!3 !6'"' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-two-neg <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 - passing test #2
+ > ok 3 # skip passing test #3 (--run)
+ > ok 4 - passing test #4
+ > ok 5 - passing test #5
+ > ok 6 # skip passing test #6 (--run)
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run a range and negation' "
+ run_sub_test_lib_test run-range-and-neg \
+ '--run a range and negation' --run='"'-4 !2'"' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-range-and-neg <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 # skip passing test #2 (--run)
+ > ok 3 - passing test #3
+ > ok 4 - passing test #4
+ > ok 5 # skip passing test #5 (--run)
+ > ok 6 # skip passing test #6 (--run)
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run range negation' "
+ run_sub_test_lib_test run-range-neg \
+ '--run range negation' --run='"'!1-3'"' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-range-neg <<-\\EOF
+ > ok 1 # skip passing test #1 (--run)
+ > ok 2 # skip passing test #2 (--run)
+ > ok 3 # skip passing test #3 (--run)
+ > ok 4 - passing test #4
+ > ok 5 - passing test #5
+ > ok 6 - passing test #6
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run include, exclude and include' "
+ run_sub_test_lib_test run-inc-neg-inc \
+ '--run include, exclude and include' \
+ --run='"'1-5 !1-3 2'"' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-inc-neg-inc <<-\\EOF
+ > ok 1 # skip passing test #1 (--run)
+ > ok 2 - passing test #2
+ > ok 3 # skip passing test #3 (--run)
+ > ok 4 - passing test #4
+ > ok 5 - passing test #5
+ > ok 6 # skip passing test #6 (--run)
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run include, exclude and include, comma separated' "
+ run_sub_test_lib_test run-inc-neg-inc-comma \
+ '--run include, exclude and include, comma separated' \
+ --run=1-5,\!1-3,2 <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-inc-neg-inc-comma <<-\\EOF
+ > ok 1 # skip passing test #1 (--run)
+ > ok 2 - passing test #2
+ > ok 3 # skip passing test #3 (--run)
+ > ok 4 - passing test #4
+ > ok 5 - passing test #5
+ > ok 6 # skip passing test #6 (--run)
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run exclude and include' "
+ run_sub_test_lib_test run-neg-inc \
+ '--run exclude and include' \
+ --run='"'!3- 5'"' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-neg-inc <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 - passing test #2
+ > ok 3 # skip passing test #3 (--run)
+ > ok 4 # skip passing test #4 (--run)
+ > ok 5 - passing test #5
+ > ok 6 # skip passing test #6 (--run)
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run empty selectors' "
+ run_sub_test_lib_test run-empty-sel \
+ '--run empty selectors' \
+ --run='1,,3,,,5' <<-\\EOF &&
+ for i in 1 2 3 4 5 6
+ do
+ test_expect_success \"passing test #\$i\" 'true'
+ done
+ test_done
+ EOF
+ check_sub_test_lib_test run-empty-sel <<-\\EOF
+ > ok 1 - passing test #1
+ > ok 2 # skip passing test #2 (--run)
+ > ok 3 - passing test #3
+ > ok 4 # skip passing test #4 (--run)
+ > ok 5 - passing test #5
+ > ok 6 # skip passing test #6 (--run)
+ > # passed all 6 test(s)
+ > 1..6
+ EOF
+"
+
+test_expect_success '--run invalid range start' "
+ run_sub_test_lib_test_err run-inv-range-start \
+ '--run invalid range start' \
+ --run='a-5' <<-\\EOF &&
+ test_expect_success \"passing test #1\" 'true'
+ test_done
+ EOF
+ check_sub_test_lib_test_err run-inv-range-start \
+ <<-\\EOF_OUT 3<<-\\EOF_ERR
+ > FATAL: Unexpected exit with code 1
+ EOF_OUT
+ > error: --run: invalid non-numeric in range start: 'a-5'
+ EOF_ERR
+"
+
+test_expect_success '--run invalid range end' "
+ run_sub_test_lib_test_err run-inv-range-end \
+ '--run invalid range end' \
+ --run='1-z' <<-\\EOF &&
+ test_expect_success \"passing test #1\" 'true'
+ test_done
+ EOF
+ check_sub_test_lib_test_err run-inv-range-end \
+ <<-\\EOF_OUT 3<<-\\EOF_ERR
+ > FATAL: Unexpected exit with code 1
+ EOF_OUT
+ > error: --run: invalid non-numeric in range end: '1-z'
+ EOF_ERR
+"
+
+test_expect_success '--run invalid selector' "
+ run_sub_test_lib_test_err run-inv-selector \
+ '--run invalid selector' \
+ --run='1?' <<-\\EOF &&
+ test_expect_success \"passing test #1\" 'true'
+ test_done
+ EOF
+ check_sub_test_lib_test_err run-inv-selector \
+ <<-\\EOF_OUT 3<<-\\EOF_ERR
+ > FATAL: Unexpected exit with code 1
+ EOF_OUT
+ > error: --run: invalid non-numeric in test selector: '1?'
+ EOF_ERR
+"
+
+
test_set_prereq HAVEIT
haveit=no
test_expect_success HAVEIT 'test runs if prerequisite is satisfied' '
diff --git a/t/test-lib.sh b/t/test-lib.sh
index e7d9c51..91000fe 100644
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -191,6 +191,14 @@ do
immediate=t; shift ;;
-l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests)
GIT_TEST_LONG=t; export GIT_TEST_LONG; shift ;;
+ -r)
+ shift; test "$#" -ne 0 || {
+ echo 'error: -r requires an argument' >&2;
+ exit 1;
+ }
+ run_list=$1; shift ;;
+ --run=*)
+ run_list=$(expr "z$1" : 'z[^=]*=\(.*\)'); shift ;;
-h|--h|--he|--hel|--help)
help=t; shift ;;
-v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose)
@@ -366,6 +374,99 @@ match_pattern_list () {
return 1
}
+match_test_selector_list () {
+ title="$1"
+ shift
+ arg="$1"
+ shift
+ test -z "$1" && return 0
+
+ # Both commas and whitespace are accepted as separators.
+ OLDIFS=$IFS
+ IFS=' ,'
+ set -- $1
+ IFS=$OLDIFS
+
+ # If the first selector is negative we include by default.
+ include=
+ case "$1" in
+ !*) include=t ;;
+ esac
+
+ for selector
+ do
+ orig_selector=$selector
+
+ positive=t
+ case "$selector" in
+ !*)
+ positive=
+ selector=${selector##?}
+ ;;
+ esac
+
+ test -z "$selector" && continue
+
+ case "$selector" in
+ *-*)
+ if expr "z${selector%%-*}" : "z[0-9]*[^0-9]"
>/dev/null
+ then
+ echo "error: $title: invalid
non-numeric in range" \
+ "start: '$orig_selector'" >&2
+ exit 1
+ fi
+ if expr "z${selector#*-}" : "z[0-9]*[^0-9]"
>/dev/null
+ then
+ echo "error: $title: invalid
non-numeric in range" \
+ "end: '$orig_selector'" >&2
+ exit 1
+ fi
+ ;;
+ *)
+ if expr "z$selector" : "z[0-9]*[^0-9]"
>/dev/null
+ then
+ echo "error: $title: invalid
non-numeric in test" \
+ "selector: '$orig_selector'" >&2
+ exit 1
+ fi
+ esac
+
+ # Short cut for "obvious" cases
+ test -z "$include" && test -z "$positive" && continue
+ test -n "$include" && test -n "$positive" && continue
+
+ case "$selector" in
+ -*)
+ if test $arg -le ${selector#-}
+ then
+ include=$positive
+ fi
+ ;;
+ *-)
+ if test $arg -ge ${selector%-}
+ then
+ include=$positive
+ fi
+ ;;
+ *-*)
+ if test ${selector%%-*} -le $arg \
+ && test $arg -le ${selector#*-}
+ then
+ include=$positive
+ fi
+ ;;
+ *)
+ if test $arg -eq $selector
+ then
+ include=$positive
+ fi
+ ;;
+ esac
+ done
+
+ test -n "$include"
+}
+
maybe_teardown_verbose () {
test -z "$verbose_only" && return
exec 4>/dev/null 3>/dev/null
@@ -470,6 +571,13 @@ test_skip () {
fi
skipped_reason="missing $missing_prereq${of_prereq}"
fi
+ if test -z "$to_skip" && test -n "$run_list" &&
+ ! match_test_selector_list '--run' $test_count "$run_list"
+ then
+ to_skip=t
+ skipped_reason="--run"
+ fi
+
case "$to_skip" in
t)
say_color skip >&3 "skipping test: $@"
--
1.7.9
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
