I got the frames from Goggles4U a day or two ago, shipped in a box that looked like it had been originally used to ship a package of bank checks. There was no paperwork inside, and the return address didn't identify the sender as Goggles4U. The frames were somewhat more rectangular-shaped (wider and shorter) than I expected, and there were no rivets on the front, unlike the photo.
I really wanted a rounder shape, so I went to the sink, put the frame under hot water, removed the lenses and pushed the lens areas inward, then cooled the plastic under cold water. After doing this a few times, I got the shape I wanted. So instead of about 47mm x 35mm, I got something more like 44mm x 38mm. I then realized that I might have some older lenses that could fit. Using the hot water again, I installed a pair of P-3 shaped lenses that were almost an exact fit, but leaving just a a bit of air space on the outer edges toward the top. The lenses are just a bit too easy to remove, so maybe I'll see if I can get some place to re-lens them with an exact fit for this rounder shape. --~--~---------~--~----~------------~-------~--~----~ Check us out at the oft-updated http://glassyeyes.blogspot.com! You received this message because you are subscribed to the Google Groups "GlassyEyes" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/glassyeyes?hl=en -~----------~----~----~----~------~----~------~--~---
