Hello all,
Four-node client-side replication setup running 3.0.0 throughout.
Config generated via :
$ /usr/bin/glusterfs-volgen --name replicated --raid 1 s01:/opt/gluster
s02:/opt/gluster
Connected via private gigabit LAN. The hardware in each of the four
nodes is identical.
Running the following script on one of the clients :
---
#!/bin/bash
loop=0
while [ $loop -lt 100 ]
do
(time /usr/sbin/bonnie++ -d /opt/gluster/bonnie -u root) 3>&1 2>&3 |
tee -a bonnie-single-c01.log
done
---
[r...@c01 ~]# # bonnie++ 2>&1 | grep Version
Version: 1.03
The time to completion has been slowly creeping upwards. Granted, the
full run hasn't completed yet, but after 89 iterations, a clear trend
appears to be forming :
[r...@c01 ~]# grep real bonnie-single-c01.log
real 15m4.444s
real 15m49.245s
real 16m44.263s
real 16m55.868s
real 17m16.479s
real 18m4.800s
real 19m18.089s
real 20m59.218s
real 22m58.493s
real 22m25.134s
real 23m36.715s
real 25m4.022s
real 29m36.527s
real 26m26.325s
real 28m37.396s
real 35m4.289s
real 32m41.834s
real 34m33.418s
real 37m1.098s
real 38m10.750s
real 46m14.002s
real 40m15.416s
real 36m53.414s
real 44m46.302s
real 38m57.842s
real 41m55.745s
real 46m41.493s
real 54m12.818s
real 52m53.408s
real 36m20.212s
real 40m1.991s
real 54m54.110s
real 57m57.162s
real 57m53.896s
real 62m56.905s
real 65m53.524s
real 67m54.105s
real 74m40.195s
real 80m30.843s
real 81m15.571s
real 77m50.950s
real 91m46.081s
real 87m50.726s
real 94m7.863s
real 94m37.050s
real 86m43.104s
real 96m22.384s
real 98m42.054s
real 103m56.266s
real 109m33.518s
real 101m49.557s
real 93m25.883s
real 87m26.209s
real 97m36.759s
real 111m18.548s
real 97m53.249s
real 97m44.629s
real 100m36.912s
real 102m15.858s
real 97m16.631s
real 116m44.927s
real 102m11.010s
real 129m3.242s
real 99m32.759s
real 117m23.075s
real 112m1.927s
real 116m45.873s
real 125m22.549s
real 129m7.776s
real 114m19.009s
real 120m21.973s
real 111m15.333s
real 113m4.147s
real 96m20.848s
real 107m0.043s
real 128m11.131s
real 118m58.662s
real 116m40.381s
real 118m50.392s
real 118m17.404s
real 117m29.695s
real 94m45.270s
real 104m35.469s
real 125m56.206s
real 108m40.728s
real 133m24.056s
real 103m16.188s
real 146m42.629s
real 101m5.182s
As a control, i ran the same script with a local filesystem target on
the other client :
[r...@c02 ~]# grep real bonnie-local-c02.log
real 3m42.788s
real 3m43.251s
real 3m42.568s
real 3m42.533s
real 3m41.764s
real 3m43.305s
real 3m42.536s
real 3m43.052s
real 3m44.406s
real 3m42.894s
real 3m43.639s
(cut for brevity - all 100 runs are around this time mark.)
It is perhaps worth noting that the load on c01 (running the gluster
tests) has been creeping up as well. It started at basically 0, and is
now at 4.03, 3.94, 3.27 .
Any ideas what's going on ?
--
Daniel Maher <dma+gluster AT witbe DOT net>
_______________________________________________
Gluster-devel mailing list
Gluster-devel@nongnu.org
http://lists.nongnu.org/mailman/listinfo/gluster-devel