Hi Nathan,
fuse-2.8.0pre3 is required by glusterfs for libfuse dependency, but
fuse-2.8.0pre3 doesn't provide kernel module, instead should be used from
the kernel itself. Also fuse-2.8.0pre3 is in compliance with the kernel
module released with upstream fuse kernel module API.
Regards
--
Harshavardhana
Gluster - http://www.gluster.com
On Thu, Aug 6, 2009 at 12:05 AM, Harshavardhana <har...@gluster.com> wrote:
> Hi Nathon,
>
> You should be using fuse-2.8.0pre3 released from the their
> sf.netwebsite. Let us know your findings
>
> Thanks
> --
> Harshavardhana
> Gluster - http://www.gluster.com
>
>
>
> On Wed, Aug 5, 2009 at 7:35 PM, Nathan Stratton <nat...@robotics.net>wrote:
>
>>
>> I am trying to get more then 25 out of raw 500 MB/s with
>> --disable-direct-io-mode. I have been able to build a XEN Dom0 and
>> Infiniband support into the latest kernel 2.6.31-rc4. I also have FUSE in
>> the kernel, should I be using that, or should I use fuse-2.7.4glfs11?
>>
>> <>
>>>
>> Nathan Stratton CTO, BlinkMind, Inc.
>> nathan at robotics.net nathan at blinkmind.com
>> http://www.robotics.net http://www.blinkmind.com
>>
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users@gluster.org
>> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
>>
>
>
_______________________________________________
Gluster-users mailing list
Gluster-users@gluster.org
http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
