Hello all, I just ran over Gluster 3.1 and got it up and running in notime. Thanks for the great FS.
I have a question regarding multiple network. We have all our servers connected via an non-routed internal switch (a private subnet through which only the servers shall communicate with each other), additionally the official subnet to enable their reachability from the outside world. The internal IPnetwork is 10.10.x.x and the external shall be 192.168.x.x (for the sake of the question). I have now set up 3 servers as a GlusterFS. With a Striped Volume over the 10.10.x.x network. All clients that are within this network can mount and use the volume. The problem arises with the clients from the other 192.168.x network. They can mount the volume via: mount -t glusterfs 192.168.x.x:volname /mnt but they fail to use the mountpoint (ls and so) I have read another post (http://bit.ly/a3Tm6n) but the solution mentioned there does not seem to work with version 3.1 any more. The server(s) complain about "transport.socket..." not being allowed in the volume file. The client from the 192.168.x.x network tries to contact the bricks via the 10.10.x network and not via 192.168.x.x (which would work) Is there a solution to this problem? As I understand it, I would need to define the bricks with their 192.168.x.x ip-adresses but this would mean that the internal network won't be used. Can I define one brick with both ip-adresses (or 0.0.0.0). Setting the "auth.allow" option to both subnets did not solve the problem (except for the mount being possible after setting it) Any help is highly appreciated. Thanks, udo. -- ---[ Institute of Cognitive Science @ University of Osnabrueck ---[ Albrechtstrasse 28, D-49076 Osnabrueck, 969-3362 ---[ Documentation: https://doc.ikw.uni-osnabrueck.de _______________________________________________ Gluster-users mailing list Gluster-users@gluster.org http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
