Can you provide the following details from the time of the pop3 test on FUSE mount:
1. mount FUSE client with -LTRACE and logs from that session 2. strace -f -p <pop3 daemon> -o /tmp/pop3-strace.log Thanks, Avati On Sat, Nov 23, 2013 at 3:56 PM, W K <wkm...@bneit.com> wrote: > We brought up a test cluster to investigate GlusterFS. > > Using the Quick Start instructions, we brought up a 2 server 1 brick > replicating setup and mounted to it from a third box with the fuse mount > (all ver 3.4.1) > > # gluster volume info > > Volume Name: mailtest > Type: Replicate > Volume ID: 9e412774-b8c9-4135-b7fb-bc0dd298d06a > Status: Started > Number of Bricks: 1 x 2 = 2 > Transport-type: tcp > Bricks: > Brick1: gluster2:/gluster1/mailtest/brick1 > Brick2: gluster1:/gluster1/mailtest/brick1 > Options Reconfigured: > server.root-squash: no > > We then began loading the cluster with data (from a nearby Mailserver) by > rsyncing Maildirs onto the mount. We chose maildirs because small files are > supposed to be a worst case scenario in Gluster. > > During our testing, everything worked great. Speed was acceptable (we are > familiar with other Distributed File Systems, so we don't have unrealistic > expectations). > > We yanked cords, turned off machines and generally tortured the setup, all > to good effect. Everything performs as advertised, though you have to do a > LOT of googling to get some of the answers when 'recovering'. There appears > to be a lot of 'secret' recipes to get things done and I think the doc site > should link to JoeJulians blog, among others <grin>. > > We then decided to see what email Maildir performance was like using a > pop3 tester program. > > So we quickly installed qmail which has the qmail-pop3d daemon. > > The result was that the pop daemon cant see the email > > # telnet localhost 110 > Trying 127.0.0.1... > Connected to localhost. > Escape character is '^]'. > +OK <20481.1385248027@mailtest> > USER glusttest > +OK > PASS somepass > +OK > LIST > +OK > . > > If we copy that SAME directory over to /users (not on the gluster mount), > then the LIST command shows that email. So we know that the qmail-pop3d > setup is working fine. > > LIST > +OK > 1 3120 > 2 11157 > 3 3267 > etc. > > So since we normally use POP/IMAP over NFS, we decided to try the gluster > NFS mount. > > That the NFS mount gave us an even stranger result. It doesn't even see > the Maildir. > > # telnet localhost 110 > Trying 127.0.0.1... > Connected to localhost. > Escape character is '^]'. > +OK <20488.1385248223@mailtest> > USER glusttest > +OK > PASS somepass > -ERR this user has no $HOME/Maildir > Connection closed by foreign host. > > > We have verified that the NTP daemon and thus the time settings are > correct. > There are NO errors corresponding to this activity in any of the log files > on either the data servers or the mount (logs only refer to the > mount/unmount ops). > Using the command line, we can manually manipulate files on the mount to > our hearts content (as root or as an appropriate user) with no errors. > mkdir, rm, touch, all work fine. > > However, using the VmailMGR command line tools, we are unable to add new > users when mounted under NFS > > # su - glusttest > > $ vadduser test2 > Enter the user's new password: > Please type it again for verification: > vadduser: error adding the virtual user: > Can't create the mail directory './users/test2' > > then when its manually created qmail refused to deliver to that Maildir > because it cant see the install > (in this case .qmail file) > > 1385249260.729221 delivery 146770: failure: Sorry,_no_mailbox_here_by_ > that_name._(#5.1.1)/ > > > Under the FUSE mount, VmailMGR tools work fine and email is able to be > delivered to the Maildir. > > $ vadduser test3 > Enter the user's new password: > Please type it again for verification: > vadduser: user 'test3' successfully added. > > but of course the pop3 daemon doesn't see the email that qmail process > just was just delivered. > > Finally, you can see from the info provided, that we deliberately disabled > root_squash (since thats a new 3.4 feature) but that made no difference to > any of the above results. > > SELINUX is disabled on all 3 machines. > > So.... > > What is going on here? > > Its not a mission critical, as GlusterFS is probably inappropriate for a > mailserver, but I really need to understand what is going on so I can > recommend GlusterFS for other situations. > > Is this a MailDir thing or is something else going on? > > > Sincerely, > > -bill > > > > > > > > > > _______________________________________________ > Gluster-users mailing list > Gluster-users@gluster.org > http://supercolony.gluster.org/mailman/listinfo/gluster-users >
_______________________________________________ Gluster-users mailing list Gluster-users@gluster.org http://supercolony.gluster.org/mailman/listinfo/gluster-users