I've not used ZFS in production. Outside of GlusterFS, how does it handle running at 90%+ allocated?
Again, speaking outside of GlusterFS, ext3, ext4 and XFS all classically slow down when they reach high usage rates. Not noticeable at all on my home media server in a family of 5, but hugely noticeable at work when hundreds of artists and render nodes on a mix of 1GbE and 10GbE are smashing a NAS. GlusterFS alleviates the problem somewhat (in combination due to it's distribution, and the fact that not all bricks hit ~90% at the same time). But it's still felt. -Dan ---------------- Dan Mons Unbreaker of broken things Cutting Edge http://cuttingedge.com.au On 7 October 2014 14:56, Franco Broi <franco.b...@iongeo.com> wrote: > Our bricks are 50TB, running ZOL, 16 disks raidz2. Works OK with Gluster > now that they fixed xattrs. > > 8k writes with fsync 170MB/Sec, reads 335MB/Sec. > > On Tue, 2014-10-07 at 14:24 +1000, Dan Mons wrote: >> We have 6 nodes with one brick per node (2x3 replicate-distribute). >> 35TB per brick, for 107TB total usable. >> >> Not sure if our low brick count (or maybe large brick per node?) >> contributes to the slowdown when full. >> >> We're looking to add more nodes by the end of the year. After that, >> I'll look this thread up and comment on what that's changed, >> performance wise. >> >> -Dan >> >> ---------------- >> Dan Mons >> Unbreaker of broken things >> Cutting Edge >> http://cuttingedge.com.au >> >> >> On 7 October 2014 14:16, Franco Broi <franco.b...@iongeo.com> wrote: >> > >> > Not an issue for us, were at 92% on an 800TB distributed volume, 16 >> > bricks spread across 4 servers. Lookups can be a bit slow but raw IO >> > hasn't changed. >> > >> > On Tue, 2014-10-07 at 09:16 +1000, Dan Mons wrote: >> >> On 7 October 2014 08:56, Jeff Darcy <jda...@redhat.com> wrote: >> >> > I can't think of a good reason for such a steep drop-off in GlusterFS. >> >> > Sure, performance should degrade somewhat due to fragmenting, but not >> >> > suddenly. It's not like Lustre, which would do massive preallocation >> >> > and fall apart when there was no longer enough space to do that. It >> >> > might be worth measuring average latency at the local-FS level, to see >> >> > if the problem is above or below that line. >> >> >> >> Happens like clockwork for us. The moment we get alerts saying the >> >> file system has hit 90%, we get a flood of support tickets about >> >> performance. >> >> >> >> It happens to a lesser degree on standard CentOS NAS units running XFS >> >> we have around the place. But again, I see the same sort of thing on >> >> any file system (vendor supplied, self-built, OS and FS agnostic). >> >> And yes, it's measurable (Munin graphs show it off nicely). >> >> >> >> -Dan >> >> _______________________________________________ >> >> Gluster-users mailing list >> >> Gluster-users@gluster.org >> >> http://supercolony.gluster.org/mailman/listinfo/gluster-users >> > >> > > > _______________________________________________ Gluster-users mailing list Gluster-users@gluster.org http://supercolony.gluster.org/mailman/listinfo/gluster-users