Hi, We had an outage in our gluster setup and I had to rm -rf /var/lib/gluster/*
I rebuild the setup from scratch but op-version for volumes is set as 2 for op-version and client-op-version. op-version in glusterd.info is 30501. The main issue is when I try to set property it fails only for certain volumes: 3 nodes gluster 3.5.2 On all nodes: glusterd.info operating-version=30501 grep -ri op-version * vols/vol1/info:op-version=2 vols/vol1/info:client-op-version=2 vols/vol2/info:op-version=2 vols/vol2/info:client-op-version=2 node B# gluster vol set vol2 quick-read off volume set: failed: One or more connected clients cannot support the feature being set. These clients need to be upgraded or disconnected before running this command again node B# gluster vol set vol1 quick-read off volume set: success vol1 is distributed on one node (node A) vol2 is distributed on one node (node B) So node B can’t set the property because of op-version: [2015-02-12 18:10:57.852334] E [glusterd-op-sm.c:357:glusterd_check_client_op_version_support] 0-management: One or more clients don't support the required op-version [2015-02-12 18:10:57.852380] E [glusterd-syncop.c:912:gd_stage_op_phase] 0-management: Staging of operation 'Volume Set' failed on localhost : One or more connected clients cannot support the feature being set. These clients need to be upgraded or disconnected before running this command again Thanks -- Cyril Peponnet
_______________________________________________ Gluster-users mailing list Gluster-users@gluster.org http://www.gluster.org/mailman/listinfo/gluster-users
