Hi all,
I have a problem about how to recovery a replicate volume.
precondition:
glusterfs version:3.7.6
brick of A board :128.224.95.140:/data/brick/gv0
brick of B board:128.224.162.255:/data/brick/gv0
reproduce:
1.gluster peer probe 128.224.162.255
(on A board)
2.gluster volume create gv0 replica 2 128.224.95.140:/data/brick/gv0
128.224.162.255:/data/brick/gv0 force (on A
board)
3.gluster volume start gv0
(on A board)
4.reboot the B board
After B board reboot,sometimes I have problems as below.
1.the peer status some times is rejected when I run "gluster peer status".
(on A or B board)
2.The brick on B board sometimes is offline When I run "gluster volume status"
(on A or B board)
I want to know how I should do to recovery my replicate volume.
PS.
Now I do following operation to recovery my replicate volume.But sometimes I
can't sync all the files in replicate volume even if I run "heal full".
1.gluster volume remove-brick gv0 replica 1 128.224.162.255:/data/brick/gv0
force
(on A board)
2. gluster peer detach 128.224.162.255
(on A board)
3.gluster peer probe 128.224.162.255
(on A board)
4.gluster volume add-brick gv0 replica 2 128.224.162.255:/data/brick/gv0 force
(on A board)
Please help me.
Thanks,
Xin_______________________________________________
Gluster-users mailing list
Gluster-users@gluster.org
http://www.gluster.org/mailman/listinfo/gluster-users
