Thank you for your email mate.
Yes, im aware of this but, to save costs i chose replica 2, this cluster is all flash. In version 3.7.x i had issues with ping timeout, if one hosts went down for few seconds the whole cluster hangs and become unavailable, to avoid this i adjusted the ping timeout to 5 seconds. As for choosing Ganesha over gfapi, VMWare does not support Gluster (FUSE or gfapi) im stuck with NFS for this volume. The other volume is mounted using gfapi in oVirt cluster. -- Respectfully Mahdi A. Mahdi ________________________________ From: Krutika Dhananjay <kdhan...@redhat.com> Sent: Sunday, March 19, 2017 2:01:49 PM To: Mahdi Adnan Cc: gluster-users@gluster.org Subject: Re: [Gluster-users] Gluster 3.8.10 rebalance VMs corruption While I'm still going through the logs, just wanted to point out a couple of things: 1. It is recommended that you use 3-way replication (replica count 3) for VM store use case 2. network.ping-timeout at 5 seconds is way too low. Please change it to 30. Is there any specific reason for using NFS-Ganesha over gfapi/FUSE? Will get back with anything else I might find or more questions if I have any. -Krutika On Sun, Mar 19, 2017 at 2:36 PM, Mahdi Adnan <mahdi.ad...@outlook.com<mailto:mahdi.ad...@outlook.com>> wrote: Thanks mate, Kindly, check the attachment. -- Respectfully Mahdi A. Mahdi ________________________________ From: Krutika Dhananjay <kdhan...@redhat.com<mailto:kdhan...@redhat.com>> Sent: Sunday, March 19, 2017 10:00:22 AM To: Mahdi Adnan Cc: gluster-users@gluster.org<mailto:gluster-users@gluster.org> Subject: Re: [Gluster-users] Gluster 3.8.10 rebalance VMs corruption In that case could you share the ganesha-gfapi logs? -Krutika On Sun, Mar 19, 2017 at 12:13 PM, Mahdi Adnan <mahdi.ad...@outlook.com<mailto:mahdi.ad...@outlook.com>> wrote: I have two volumes, one is mounted using libgfapi for ovirt mount, the other one is exported via NFS-Ganesha for VMWare which is the one im testing now. -- Respectfully Mahdi A. Mahdi ________________________________ From: Krutika Dhananjay <kdhan...@redhat.com<mailto:kdhan...@redhat.com>> Sent: Sunday, March 19, 2017 8:02:19 AM To: Mahdi Adnan Cc: gluster-users@gluster.org<mailto:gluster-users@gluster.org> Subject: Re: [Gluster-users] Gluster 3.8.10 rebalance VMs corruption On Sat, Mar 18, 2017 at 10:36 PM, Mahdi Adnan <mahdi.ad...@outlook.com<mailto:mahdi.ad...@outlook.com>> wrote: Kindly, check the attached new log file, i dont know if it's helpful or not but, i couldn't find the log with the name you just described. No. Are you using FUSE or libgfapi for accessing the volume? Or is it NFS? -Krutika -- Respectfully Mahdi A. Mahdi ________________________________ From: Krutika Dhananjay <kdhan...@redhat.com<mailto:kdhan...@redhat.com>> Sent: Saturday, March 18, 2017 6:10:40 PM To: Mahdi Adnan Cc: gluster-users@gluster.org<mailto:gluster-users@gluster.org> Subject: Re: [Gluster-users] Gluster 3.8.10 rebalance VMs corruption mnt-disk11-vmware2.log seems like a brick log. Could you attach the fuse mount logs? It should be right under /var/log/glusterfs/ directory named after the mount point name, only hyphenated. -Krutika On Sat, Mar 18, 2017 at 7:27 PM, Mahdi Adnan <mahdi.ad...@outlook.com<mailto:mahdi.ad...@outlook.com>> wrote: Hello Krutika, Kindly, check the attached logs. -- Respectfully Mahdi A. Mahdi ________________________________ From: Krutika Dhananjay <kdhan...@redhat.com<mailto:kdhan...@redhat.com>> Sent: Saturday, March 18, 2017 3:29:03 PM To: Mahdi Adnan Cc: gluster-users@gluster.org<mailto:gluster-users@gluster.org> Subject: Re: [Gluster-users] Gluster 3.8.10 rebalance VMs corruption Hi Mahdi, Could you attach mount, brick and rebalance logs? -Krutika On Sat, Mar 18, 2017 at 12:14 AM, Mahdi Adnan <mahdi.ad...@outlook.com<mailto:mahdi.ad...@outlook.com>> wrote: Hi, I have upgraded to Gluster 3.8.10 today and ran the add-brick procedure in a volume contains few VMs. After the completion of rebalance, i have rebooted the VMs, some of ran just fine, and others just crashed. Windows boot to recovery mode and Linux throw xfs errors and does not boot. I ran the test again and it happened just as the first one, but i have noticed only VMs doing disk IOs are affected by this bug. The VMs in power off mode started fine and even md5 of the disk file did not change after the rebalance. anyone else can confirm this ? Volume info: Volume Name: vmware2 Type: Distributed-Replicate Volume ID: 02328d46-a285-4533-aa3a-fb9bfeb688bf Status: Started Snapshot Count: 0 Number of Bricks: 22 x 2 = 44 Transport-type: tcp Bricks: Brick1: gluster01:/mnt/disk1/vmware2 Brick2: gluster03:/mnt/disk1/vmware2 Brick3: gluster02:/mnt/disk1/vmware2 Brick4: gluster04:/mnt/disk1/vmware2 Brick5: gluster01:/mnt/disk2/vmware2 Brick6: gluster03:/mnt/disk2/vmware2 Brick7: gluster02:/mnt/disk2/vmware2 Brick8: gluster04:/mnt/disk2/vmware2 Brick9: gluster01:/mnt/disk3/vmware2 Brick10: gluster03:/mnt/disk3/vmware2 Brick11: gluster02:/mnt/disk3/vmware2 Brick12: gluster04:/mnt/disk3/vmware2 Brick13: gluster01:/mnt/disk4/vmware2 Brick14: gluster03:/mnt/disk4/vmware2 Brick15: gluster02:/mnt/disk4/vmware2 Brick16: gluster04:/mnt/disk4/vmware2 Brick17: gluster01:/mnt/disk5/vmware2 Brick18: gluster03:/mnt/disk5/vmware2 Brick19: gluster02:/mnt/disk5/vmware2 Brick20: gluster04:/mnt/disk5/vmware2 Brick21: gluster01:/mnt/disk6/vmware2 Brick22: gluster03:/mnt/disk6/vmware2 Brick23: gluster02:/mnt/disk6/vmware2 Brick24: gluster04:/mnt/disk6/vmware2 Brick25: gluster01:/mnt/disk7/vmware2 Brick26: gluster03:/mnt/disk7/vmware2 Brick27: gluster02:/mnt/disk7/vmware2 Brick28: gluster04:/mnt/disk7/vmware2 Brick29: gluster01:/mnt/disk8/vmware2 Brick30: gluster03:/mnt/disk8/vmware2 Brick31: gluster02:/mnt/disk8/vmware2 Brick32: gluster04:/mnt/disk8/vmware2 Brick33: gluster01:/mnt/disk9/vmware2 Brick34: gluster03:/mnt/disk9/vmware2 Brick35: gluster02:/mnt/disk9/vmware2 Brick36: gluster04:/mnt/disk9/vmware2 Brick37: gluster01:/mnt/disk10/vmware2 Brick38: gluster03:/mnt/disk10/vmware2 Brick39: gluster02:/mnt/disk10/vmware2 Brick40: gluster04:/mnt/disk10/vmware2 Brick41: gluster01:/mnt/disk11/vmware2 Brick42: gluster03:/mnt/disk11/vmware2 Brick43: gluster02:/mnt/disk11/vmware2 Brick44: gluster04:/mnt/disk11/vmware2 Options Reconfigured: cluster.server-quorum-type: server nfs.disable: on performance.readdir-ahead: on transport.address-family: inet performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off cluster.eager-lock: enable network.remote-dio: enable features.shard: on cluster.data-self-heal-algorithm: full features.cache-invalidation: on ganesha.enable: on features.shard-block-size: 256MB client.event-threads: 2 server.event-threads: 2 cluster.favorite-child-policy: size storage.build-pgfid: off network.ping-timeout: 5 cluster.enable-shared-storage: enable nfs-ganesha: enable cluster.server-quorum-ratio: 51% Adding bricks: gluster volume add-brick vmware2 replica 2 gluster01:/mnt/disk11/vmware2 gluster03:/mnt/disk11/vmware2 gluster02:/mnt/disk11/vmware2 gluster04:/mnt/disk11/vmware2 starting fix layout: gluster volume rebalance vmware2 fix-layout start Starting rebalance: gluster volume rebalance vmware2 start -- Respectfully Mahdi A. Mahdi _______________________________________________ Gluster-users mailing list Gluster-users@gluster.org<mailto:Gluster-users@gluster.org> http://lists.gluster.org/mailman/listinfo/gluster-users
_______________________________________________ Gluster-users mailing list Gluster-users@gluster.org http://lists.gluster.org/mailman/listinfo/gluster-users