Hi,

I've just created again the gluster with NFS ganesha. Glusterfs version 3.8

When I run the command  gluster nfs-ganesha enable - it returns a success.
However, looking at the pcs status, I see this:

[root@tlxdmz-nfs1 ~]# pcs status
Cluster name: ganesha-nfs
Stack: corosync
Current DC: tlxdmz-nfs2 (version 1.1.16-12.el7_4.5-94ff4df) - partition
with quorum
Last updated: Wed Dec 20 09:20:44 2017
Last change: Wed Dec 20 09:19:27 2017 by root via cibadmin on tlxdmz-nfs1

2 nodes configured
8 resources configured

Online: [ tlxdmz-nfs1 tlxdmz-nfs2 ]

Full list of resources:

 Clone Set: nfs_setup-clone [nfs_setup]
     Started: [ tlxdmz-nfs1 tlxdmz-nfs2 ]
 Clone Set: nfs-mon-clone [nfs-mon]
     Started: [ tlxdmz-nfs1 tlxdmz-nfs2 ]
 Clone Set: nfs-grace-clone [nfs-grace]
     Started: [ tlxdmz-nfs1 tlxdmz-nfs2 ]
 tlxdmz-nfs1-cluster_ip-1       (ocf::heartbeat:IPaddr):        Stopped
 tlxdmz-nfs2-cluster_ip-1       (ocf::heartbeat:IPaddr):        Stopped

Failed Actions:
* tlxdmz-nfs1-cluster_ip-1_monitor_0 on tlxdmz-nfs2 'not configured' (6):
call=23, status=complete, exitreason='IP address (the ip parameter) is
mandatory',
    last-rc-change='Wed Dec 20 09:19:28 2017', queued=0ms, exec=26ms
* tlxdmz-nfs2-cluster_ip-1_monitor_0 on tlxdmz-nfs2 'not configured' (6):
call=27, status=complete, exitreason='IP address (the ip parameter) is
mandatory',
    last-rc-change='Wed Dec 20 09:19:28 2017', queued=0ms, exec=26ms
* tlxdmz-nfs1-cluster_ip-1_monitor_0 on tlxdmz-nfs1 'not configured' (6):
call=23, status=complete, exitreason='IP address (the ip parameter) is
mandatory',
    last-rc-change='Wed Dec 20 09:19:28 2017', queued=0ms, exec=24ms
* tlxdmz-nfs2-cluster_ip-1_monitor_0 on tlxdmz-nfs1 'not configured' (6):
call=27, status=complete, exitreason='IP address (the ip parameter) is
mandatory',
    last-rc-change='Wed Dec 20 09:19:28 2017', queued=0ms, exec=61ms


Daemon Status:
  corosync: active/disabled
  pacemaker: active/disabled
  pcsd: active/enabled

Any suggestion how this can be fixed when enabling nfs-ganesha when
invoking the above command or anything else that I can do to fixed the
failed actions?

Thanks
_______________________________________________
Gluster-users mailing list
Gluster-users@gluster.org
http://lists.gluster.org/mailman/listinfo/gluster-users

Reply via email to