Hi, Please let us know what commands you ran so far and the output of the *gluster volume info* command.
Thanks, Nithya On 9 January 2018 at 23:06, Jose Sanchez <joses...@carc.unm.edu> wrote: > Hello > > We are trying to setup Gluster for our project/scratch storage HPC machine > using a replicated mode with 2 nodes, 2 bricks each (14tb each). > > Our goal is to be able to have a replicated system between node 1 and 2 (A > bricks) and add an additional 2 bricks (B bricks) from the 2 nodes. so we > can have a total of 28tb replicated mode. > > Node 1 [ (Brick A) (Brick B) ] > Node 2 [ (Brick A) (Brick B) ] > -------------------------------------------- > 14Tb + 14Tb = 28Tb > > At this I was able to create the replica nodes between node 1 and 2 > (brick A) but I’ve not been able to add to the replica together, Gluster > switches to distributed replica when i add it with only 14Tb. > > Any help will be appreciated. > > Thanks > > Jose > > --------------------------------- > Jose Sanchez > Center of Advanced Research Computing > Albuquerque, NM 87131 > carc.unm.edu > > > _______________________________________________ > Gluster-users mailing list > Gluster-users@gluster.org > http://lists.gluster.org/mailman/listinfo/gluster-users >
_______________________________________________ Gluster-users mailing list Gluster-users@gluster.org http://lists.gluster.org/mailman/listinfo/gluster-users