I think I have replied all the questions you have asked. Let me know if you need any additional information.
--- Ashish ----- Original Message ----- From: "Benjamin Kingston" <[email protected]> To: "gluster-users" <[email protected]> Sent: Tuesday, July 31, 2018 1:01:29 AM Subject: [Gluster-users] Increase redundancy on existing disperse volume I'm working to convert my 3x3 arbiter replicated volume into a disperse volume, however I have to work with the existing disks, maybe adding another 1 or 2 new disks if necessary. I'm hoping to destroy the bricks on one of the replicated nodes and build it into a I'm opting to host this volume on a set of controllers connected to a common backplane, I don't need help on this config, just on the constraints of the disperse volumes. I have some questions about the disperse functionality 1. If I create a 1 redundancy volume in the beginning, after I add more bricks, can I increase redundancy to 2 or 3 2. If I create the original volume with 6TB bricks, am I really stuck with 6TB bricks even if I add 2 or more 10TB bricks 3. Is it required to extend a volume by the same number or bricks it was created with? If the original volume is made with 3 bricks, do I have to always add capacity in 3 brick increments? -ben _______________________________________________ Gluster-users mailing list [email protected] https://lists.gluster.org/mailman/listinfo/gluster-users
_______________________________________________ Gluster-users mailing list [email protected] https://lists.gluster.org/mailman/listinfo/gluster-users
