Hi, well, did i miss any answers? so far i'm still stuck on this problem. maybe i send the request at a bad date ...
Bernhard Stoevesandt Bernhard Stoevesandt wrote: > Hello all, > > well, here is again the old problem, but somehow i don't get it. I'm > trying to somehow create a quadrilateral layer on the surface in the > attached file. It is not ideal yet, but at least to get to that layer > would be nice. > I tried the method described in > http://www.cfd-online.com/Forums/openfoam-meshing-gmsh/61876-default-faces-boundary-layer.html > (as mentioned in http://www.geuz.org/pipermail/gmsh/2009/004551.html) in > the file. But somehow i just get a 3D extrusion instead of a 2D extrusion > normal to the surfaces. > The compound line and surface method from > http://www.geuz.org/pipermail/gmsh/2009/005068.html crashes with my gmsh > version (2.3.1). > Now what? Is it somehow possible to create a quadrilateral layer on the > surface? > > Bernhard Stoevesandt > > ------------------------------------------------------- > Bernhard Stoevesandt > AG TWiST + ForWind Oldenburg > > Carl-von-Ossietzky Str. 9 > Carl-von-Ossietzky Universität Oldenburg > 26129 Oldenburg > Tel.: ++ 49 (0) 441 798 3577 Fax: ++49 (0) 441 798 3579 > ------------------------------------------------------- -- --------------------------------------------------------------------------------------- Dipl. Phys. Bernhard Stoevesandt ForWind + AG TWiSt Fakultät V Carl-von-Ossietzky Universität Oldenburg Carl-von-Ossietzky-Str.9 26111 Oldenburg Tel: 0441/798-3577 Fax:0441/798-3579 --------------------------------------------------------------------------------------- _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
