Hi Caen, That's great. Don't forget to copy replies to the list though. Best wishes.
Le vendredi 1 février 2013, Wangshiraz <[email protected]> a écrit : > Hi Geordie, > > Just realised the 0 is the z value. after add s1, it all good now. > > It should like this (x,y,z,s1), before it was only (x,y,z). > > Thanks > > Cean > > > Hi Geordie, > > Yes,it is what I want.It also works here with the command way. > > But I just can't get it if I open it with GMSH and then do 2d mesh.There is mesh lines inside the hole. Strange. > I noticed the lc(line control) value is 0 at each point.I copied from other's file. > This time I set a variable s1,s2 for each loop and change a few times, but still can't get it. > > Thanks for help > > Cean > > >> Date: Fri, 1 Feb 2013 14:09:42 +1100 >> Subject: Re: [Gmsh] Meshing independent of number of points >> From: [email protected] >> To: [email protected] >> CC: [email protected] >> >> 2013/1/31 Wangshiraz <[email protected]>: >> > Hi Geordie, >> > >> > I tried your file and added a box around the spline loop. I want to cut a >> > hole from the box with the spline. But with no success. >> >> Hi Cean, >> Your example works for me. Running it with >> >> $ gmsh -2 -clscale 0.5 hole_with_a_spline.geo >> >> I get what I think is the expected mesh: a rectangle with a hole >> defined by the spline. I attach a PNG. >> My gmsh is version 2.5.1, compiled from svn sources on 64-bit Debian >> Mint GNU/Linux. > -- G. D. McBain Theory of Lift - Introductory Computational Aerodynamics in MATLAB/Octave Out now - http://www.wileyeurope.com/remtitle.cgi?111995228X
_______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
