Thanks so much for the quick reply! I just didn't know that gmsh was ; sensitive... then I built a non working example, but my real code was just missing the ; !! thanks again,
Julien On Tue, Feb 19, 2013 at 3:16 PM, Ruth V. Sabariego <[email protected]> wrote: > With the corrections of Jean-François, this is the working geo file: > > > > Ruth > > > On 19 Feb 2013, at 15:08, Jean-François Remacle > <[email protected]> wrote: > > there are 3 syntax errors (lines 7, 28 and 29 should be ended by a ";") > > Then > > Circle(112)={101,102,4}; > > points 102 and 4 are at the same position, 102 being the center and 4 being > the end point of the circle arc > > JFR > > Le 19 févr. 2013 à 13:41, Julien Derr <[email protected]> a écrit : > > <fromweb.geo> > > > ------------------------------------------------------------------ > Prof. Jean-Francois Remacle > Universite catholique de Louvain (UCL) > Ecole Polytechnique de Louvain (EPL) - Louvain School of Engineering > Institute of Mechanics, Materials and Civil Engineering (iMMC) > Center for Systems Engineering and Applied Mechanics (CESAME) > Tel : +32-10-472352 -- Mobile : +32-473-909930 > > > > > > > > _______________________________________________ > gmsh mailing list > [email protected] > http://www.geuz.org/mailman/listinfo/gmsh > > > — > Dr. Ir. Ruth V. Sabariego > University of Liege, Electrical Engineering and Computer Science > http://ace.montefiore.ulg.ac.be/ > > > > > > > > _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
