Hi Mario, Here's your example, slightly changed to make this happen. (To make it nicer you should probably group some of the smaller bits on one side).
Hope this helps, Christophe
model.geo
Description: Binary data
On 19 Feb 2013, at 17:22, Mario Ceresa <[email protected]> wrote: > Hello everybody, > first of all, thanks for gmsh: it is a really cool software! > > I have an STL model which I would like to use with Elmer solver > (http://www.csc.fi/english/pages/elmer) > > In order to do so I need a volume mesh and the 6 enclosing surfaces > for the BC conditions. > > I read the manual and the page on STL remeshing > (https://geuz.org/trac/gmsh/wiki/STLRemeshing) and I was able to > obtain a volume mesh from it (see attached simple.zip). However, I'm > unable to obtain also the 6 surfaces as separate entities (see > surf.zip). > > Is this possible with the current version of gmsh (gmsh 2.6.1)? > > Thanks and regards, > > Mario > > -- > Mario Ceresa, PhD, Ing > Senior Researcher at Alma IT System > Vilana 4B, 4º 1ª - 08022 Barcelona, Spain > T. +34 932.380592 > <simple.zip><surf.zip>_______________________________________________ > gmsh mailing list > [email protected] > http://www.geuz.org/mailman/listinfo/gmsh -- Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine
_______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
