Hi Arvind, You can extrude mesh using the Extrude command (see documentation here<http://gmsh.info/doc/texinfo/gmsh.html#Extrusions>), especially to get hex mesh you might want to use the Layers and Recombine options<http://gmsh.info/doc/texinfo/gmsh.html#Structured-grids>. I enclose an example of what you can do, let me know if it helped.
Guillaume DILASSER Doctorant SACM / LEAS CEA - Centre de Saclay - Bât.123 - PC 319c 91191 Gif sur Yvette Cedex - France - [email protected]<mailto:[email protected]> De : gmsh [mailto:[email protected]] De la part de arvind iyer Envoyé : mercredi 15 février 2017 18:12 À : [email protected] Objet : [Gmsh] Extruding 2d mesh Hi, I have a 2d (quad) mesh in .msh format. I wish to extrude this 2d mesh perpendicular to its plane as layers to get a hex mesh. Is there a way of doing this in gmsh? Regards Arvind -- ================================ Dr. Iyer Arvind Sundaram The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore all progress depends on the unreasonable man - George Bernard Shaw.
Extrusion.geo
Description: Extrusion.geo
_______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
