The -= operation works great! Thanks guys.
Jeremy, I use an application I've developed (github.com/arfc/moltres)
which is built on top of the MOOSE framework.
Alex
On 07/08/2017 04:25 AM, Jeremy Theler wrote:
Does this work for you?
Physical Volume (1) = {1:1000};
Physical Volume (1) -= {123};
BTW, what solver are you using? I suggest www.seamplex.com/milonga
--
jeremy
On Fri, 2017-07-07 at 18:39 -0500, Alex Lindsay wrote:
I have a large lattice geometry generated by for loops and extrusion.
I
have a physical volume called "fuel" composed of 841 elementary
volumes;
addition to the physical group is done automatically in the for
loops.
The "fuel" geometry is attached. I want to remove one of the
elementary
volumes from the physical volume. Through the GUI, I know its ID.
With
the information I have, can I do what I want to do? Or other
suggestions?
Alex
_______________________________________________
gmsh mailing list
gmsh@onelab.info
http://onelab.info/mailman/listinfo/gmsh
_______________________________________________
gmsh mailing list
gmsh@onelab.info
http://onelab.info/mailman/listinfo/gmsh
_______________________________________________
gmsh mailing list
gmsh@onelab.info
http://onelab.info/mailman/listinfo/gmsh
