> On 7 Dec 2017, at 17:20, Guillaume Parent <guillaume.par...@univ-artois.fr> > wrote: > > Good day everyone, > > I'm experiencing some trouble with transfinite meshes. > I made a small example (see attached file). > > In this example, I made two cases : > • Case == 1 : transfinite mesh on a 4-point surface. This is a success. > • Case == 2 : transfinite mesh on a 3-point surface, I get the > following error message : "Error : Surface 2 cannot be meshed using the > transfinite algo 29 != 9 > Is this just a matter of algo or is it just impossible to perform a > transfinite mesh on that king of geometry?
The first corner point should be singular point: try Transfinite Surface{2} = {5, 2, 1}; > > Guillaume. > > > -- > Guillaume PARENT > Maître de Conférences en Génie Electrique > Université d'Artois > Laboratoire Systèmes Electrotechniques et Environnement > > Faculté des Sciences Appliquées > Technoparc Futura 62400 BETHUNE France > Tél : (33) (0)3 21 63 72 44 > E-mail : guillaume.par...@univ-artois.fr > <transfinite_entrefer.geo>_______________________________________________ > gmsh mailing list > gmsh@onelab.info > http://onelab.info/mailman/listinfo/gmsh -- Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine Free software: http://gmsh.info | http://getdp.info | http://onelab.info _______________________________________________ gmsh mailing list gmsh@onelab.info http://onelab.info/mailman/listinfo/gmsh