Dear Christophe, we have questions to your article
"A frontal approach to hex-dominant mesh generation". We also tried to use gmesh for meshing existing CAD-data from the homepage cited as Reference 41 in the above mentioned paper. But, gmesh generates error messages concerning penetrated surfaces. Could you give us hints for meshing such CAD-files with gmesh? Many thanks Michael Am Mittwoch, den 07.12.2016, 18:36 +0100 schrieb Michael Groß: > Dear Christophe, > > I need your help with an error in gmsh. > > Using 10-node tetrahedron elements for discretizing a cook-like cube (see > attached file), I get two nodes 36 and 37, which should not exist. These > nodes arise not in the volume elements, but in the surface elements, and > therefore in the node vector and the node sets. > > Do you have the same error? I work with the linux versions. > > With kind regards, > -- Prof. Michael Groß Professur Technische Mechanik/Dynamik Fakultät für Maschinenbau Technische Universität Chemnitz Reichenhainer Straße 70 | R. W239 09126 Chemnitz Germany www.tu-chemnitz.de _______________________________________________ gmsh mailing list gmsh@onelab.info http://onelab.info/mailman/listinfo/gmsh