> On 19 Nov 2018, at 12:46, SRIKANTH C S <srikanthc...@gmail.com> wrote: > > Dear Christophe, > > I use a meshfree solver for computations. Below is an example of my current > 2D domain, > <image.png> > Here you can see an airfoil surrounded by a point distribution. > > The problem I have is with post-processing. The best way to produce a surface > plot over this domain is to triangulate the surface using the points. Once I > have a connectivity for the triangles, I can use the field data to obtain the > surface plot. Do you have any suggestions regarding this using Gmsh?
Plugin(Triangulate) should do what you need. Christophe > > Regards, > > Srikanth > _______________________________________________ > gmsh mailing list > gmsh@onelab.info > http://onelab.info/mailman/listinfo/gmsh — Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine Free software: http://gmsh.info | http://getdp.info | http://onelab.info _______________________________________________ gmsh mailing list gmsh@onelab.info http://onelab.info/mailman/listinfo/gmsh