aiswarya pawar wrote:
Szilárd,
I did a memory test run yesterday and it went fine but today received an
error. So you mean to say the tesla card version nothing to do with this
right.
You're trying to solve multiple problems at once. You told Mark that the normal
mdrun executable (which works independently of any GPU components) also hangs,
so either your filesystem is faulty or your installation procedure produced
nonfunctional executables.
You're posting bits and pieces of information, which makes it incredibly hard
for anyone to help you. Let's recap and try again. Please provide:
1. The Gromacs version you're using
2. Description of the hardware (GPU and non-GPU components)
3. Installation procedure for Gromacs and any of the prerequisite software and
libraries that were required, including versions
4. The exact command(s) you're issuing, including the full script that is
causing a problem
-Justin
Thanks
On Thu, Jan 19, 2012 at 11:09 PM, Szilárd Páll <szilard.p...@cbr.su.se
<mailto:szilard.p...@cbr.su.se>> wrote:
That's a generic GPU kernel launch failure which can mean anything,
from faulty hardware to bad driver to messed up installation.
Does the memory test run? Try to compile/install again and see if it
works.
--
Szilárd
On Thu, Jan 19, 2012 at 4:18 PM, aiswarya pawar
<aiswarya.pa...@gmail.com <mailto:aiswarya.pa...@gmail.com>> wrote:
> when i tired running it again, i got an error as
>
> Cuda error in file
>
'/home/staff/sec/secdpal/software/openmm_tesla/platforms/cuda/./src/kernels//bbsort.cu
<http://bbsort.cu>'
> in line 176 : unspecified launch failure.
>
> /bin/cat: file_loc: No such file or directory
>
>
> On Thu, Jan 19, 2012 at 8:45 PM, aiswarya pawar
<aiswarya.pa...@gmail.com <mailto:aiswarya.pa...@gmail.com>>
> wrote:
>>
>> Has the tesla card got to do anything with the error. Am
using Nvidia
>> Tesla S1070 1U server.
>>
>>
>> On Thu, Jan 19, 2012 at 8:37 PM, Szilárd Páll
<szilard.p...@cbr.su.se <mailto:szilard.p...@cbr.su.se>>
>> wrote:
>>>
>>> And sorting out where the /bin/cat error comes from because that is
>>> surely not a Gromacs message!
>>>
>>> Cheers,
>>> --
>>> Szilárd
>>>
>>>
>>>
>>> On Thu, Jan 19, 2012 at 1:12 PM, Mark Abraham
<mark.abra...@anu.edu.au <mailto:mark.abra...@anu.edu.au>>
>>> wrote:
>>> > On 19/01/2012 8:45 PM, aiswarya pawar wrote:
>>> >
>>> > Mark,
>>> >
>>> > THe normal mdrun also hangs thus not generating any output.
>>> >
>>> >
>>> > OK. It's your problem to solve... keep simplifying stuff
until you can
>>> > isolate a small number of possible causes. Top of the list is
file
>>> > system
>>> > availability.
>>> >
>>> > Mark
>>> >
>>> >
>>> >
>>> > On Thu, Jan 19, 2012 at 3:09 AM, Mark Abraham
<mark.abra...@anu.edu.au <mailto:mark.abra...@anu.edu.au>>
>>> > wrote:
>>> >>
>>> >> On 19/01/2012 2:59 AM, aiswarya.pa...@gmail.com
<mailto:aiswarya.pa...@gmail.com> wrote:
>>> >>
>>> >> Hi,
>>> >>
>>> >> Its going into the running mode but gets hang there for long
hours
>>> >> which
>>> >> generating any data in the output file. And am not able to
figure out
>>> >> the
>>> >> error file_doc. Please anyone knows what's going wrong.
>>> >>
>>> >>
>>> >> No, but you should start trying to simplify what you're
doing to see
>>> >> where
>>> >> the problem lies. Does normal mdrun work?
>>> >>
>>> >> Mark
>>> >>
>>> >>
>>> >> Thanks
>>> >> Sent from my BlackBerry® on Reliance Mobile, India's No. 1
Network. Go
>>> >> for
>>> >> it!
>>> >>
>>> >> -----Original Message-----
>>> >> From: Szilárd Páll <szilard.p...@cbr.su.se
<mailto:szilard.p...@cbr.su.se>>
>>> >> Sender: gmx-users-boun...@gromacs.org
<mailto:gmx-users-boun...@gromacs.org>
>>> >> Date: Wed, 18 Jan 2012 14:47:59
>>> >> To: Discussion list for GROMACS users<gmx-users@gromacs.org
<mailto:gmx-users@gromacs.org>>
>>> >> Reply-To: Discussion list for GROMACS users
<gmx-users@gromacs.org <mailto:gmx-users@gromacs.org>>
>>> >> Subject: Re: [gmx-users] mdrun-gpu error
>>> >>
>>> >> Hi,
>>> >>
>>> >> Most of those are just warnings, the only error I see there
comes from
>>> >> the shell, probably an error in your script.
>>> >>
>>> >> Cheers,
>>> >> --
>>> >> Szilárd
>>> >>
>>> >>
>>> >>
>>> >> On Wed, Jan 18, 2012 at 12:27 PM, aiswarya pawar
>>> >> <aiswarya.pa...@gmail.com <mailto:aiswarya.pa...@gmail.com>>
wrote:
>>> >>
>>> >> Hi users,
>>> >>
>>> >> Am running mdrun on gpu . I receive an error such as=
>>> >>
>>> >> WARNING: This run will generate roughly 38570 Mb of data
>>> >>
>>> >>
>>> >> WARNING: OpenMM does not support leap-frog, will use
velocity-verlet
>>> >> integrator.
>>> >>
>>> >>
>>> >> WARNING: OpenMM supports only Andersen thermostat with the
>>> >> md/md-vv/md-vv-avek integrators.
>>> >>
>>> >>
>>> >> WARNING: OpenMM supports only Monte Carlo barostat for pressure
>>> >> coupling.
>>> >>
>>> >>
>>> >> WARNING: OpenMM provides contraints as a combination of
SHAKE, SETTLE
>>> >> and
>>> >> CCMA. Accuracy is based on the SHAKE tolerance set by the
"shake_tol"
>>> >> option.
>>> >>
>>> >> /bin/cat: file_loc: No such file or directory
>>> >>
>>> >>
>>> >> and the job is running but the nothing written into .xtc,
.trr, .edr
>>> >> files
>>> >> .
>>> >> What could have gone wrong?
>>> >>
>>> >> --
>>> >> Aiswarya B Pawar
>>> >>
>>> >> Bioinformatics Dept,
>>> >> Indian Institute of Science
>>> >> Bangalore
>>> >>
>>> >>
>>> >>
>>> >> --
>>> >> gmx-users mailing list gmx-users@gromacs.org
<mailto:gmx-users@gromacs.org>
>>> >> http://lists.gromacs.org/mailman/listinfo/gmx-users
>>> >> Please search the archive at
>>> >> http://www.gromacs.org/Support/Mailing_Lists/Search before
posting!
>>> >> Please don't post (un)subscribe requests to the list. Use the
>>> >> www interface or send it to gmx-users-requ...@gromacs.org
<mailto:gmx-users-requ...@gromacs.org>.
>>> >> Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
>>> >>
>>> >> --
>>> >> gmx-users mailing list gmx-users@gromacs.org
<mailto:gmx-users@gromacs.org>
>>> >> http://lists.gromacs.org/mailman/listinfo/gmx-users
>>> >> Please search the archive at
>>> >> http://www.gromacs.org/Support/Mailing_Lists/Search before
posting!
>>> >> Please don't post (un)subscribe requests to the list. Use the
>>> >> www interface or send it to gmx-users-requ...@gromacs.org
<mailto:gmx-users-requ...@gromacs.org>.
>>> >> Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >> --
>>> >> gmx-users mailing list gmx-users@gromacs.org
<mailto:gmx-users@gromacs.org>
>>> >> http://lists.gromacs.org/mailman/listinfo/gmx-users
>>> >> Please search the archive at
>>> >> http://www.gromacs.org/Support/Mailing_Lists/Search before
posting!
>>> >> Please don't post (un)subscribe requests to the list. Use the
>>> >> www interface or send it to gmx-users-requ...@gromacs.org
<mailto:gmx-users-requ...@gromacs.org>.
>>> >> Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
>>> >
>>> >
>>> >
>>> >
>>> > --
>>> > Aiswarya B Pawar
>>> >
>>> > Bioinformatics Dept,
>>> > Indian Institute of Science
>>> > Bangalore
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> > --
>>> > gmx-users mailing list gmx-users@gromacs.org
<mailto:gmx-users@gromacs.org>
>>> > http://lists.gromacs.org/mailman/listinfo/gmx-users
>>> > Please search the archive at
>>> > http://www.gromacs.org/Support/Mailing_Lists/Search before
posting!
>>> > Please don't post (un)subscribe requests to the list. Use the
>>> > www interface or send it to gmx-users-requ...@gromacs.org
<mailto:gmx-users-requ...@gromacs.org>.
>>> > Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
>>> --
>>> gmx-users mailing list gmx-users@gromacs.org
<mailto:gmx-users@gromacs.org>
>>> http://lists.gromacs.org/mailman/listinfo/gmx-users
>>> Please search the archive at
>>> http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
>>> Please don't post (un)subscribe requests to the list. Use the
>>> www interface or send it to gmx-users-requ...@gromacs.org
<mailto:gmx-users-requ...@gromacs.org>.
>>> Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
>>
>>
>>
>>
>> --
>> Aiswarya B Pawar
>>
>> Bioinformatics Dept,
>> Indian Institute of Science
>> Bangalore
>>
>>
>
>
>
> --
> Aiswarya B Pawar
>
> Bioinformatics Dept,
> Indian Institute of Science
> Bangalore
>
>
>
> --
> gmx-users mailing list gmx-users@gromacs.org
<mailto:gmx-users@gromacs.org>
> http://lists.gromacs.org/mailman/listinfo/gmx-users
> Please search the archive at
> http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
> Please don't post (un)subscribe requests to the list. Use the
> www interface or send it to gmx-users-requ...@gromacs.org
<mailto:gmx-users-requ...@gromacs.org>.
> Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
--
gmx-users mailing list gmx-users@gromacs.org
<mailto:gmx-users@gromacs.org>
http://lists.gromacs.org/mailman/listinfo/gmx-users
Please search the archive at
http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
Please don't post (un)subscribe requests to the list. Use the
www interface or send it to gmx-users-requ...@gromacs.org
<mailto:gmx-users-requ...@gromacs.org>.
Can't post? Read http://www.gromacs.org/Support/Mailing_Lists
--
Aiswarya B Pawar
Bioinformatics Dept,
Indian Institute of Science
Bangalore
--
========================================
Justin A. Lemkul
Ph.D. Candidate
ICTAS Doctoral Scholar
MILES-IGERT Trainee
Department of Biochemistry
Virginia Tech
Blacksburg, VA
jalemkul[at]vt.edu | (540) 231-9080
http://www.bevanlab.biochem.vt.edu/Pages/Personal/justin
========================================
--
gmx-users mailing list gmx-users@gromacs.org
http://lists.gromacs.org/mailman/listinfo/gmx-users
Please search the archive at
http://www.gromacs.org/Support/Mailing_Lists/Search before posting!
Please don't post (un)subscribe requests to the list. Use the
www interface or send it to gmx-users-requ...@gromacs.org.
Can't post? Read http://www.gromacs.org/Support/Mailing_Lists