Op Tue, 01 Jan 2013 22:33:52 +0100 schreef s.bouta...@free.fr: > I installed gns 3 on a Loongson 3A hardware following the > instructions in [1] (Debootstrapping gNewSense")and in [2] > ("Compiling Loongson Kernel"). > > The system is installed on an usb key with 2 ext partitions. > It runs from the boot.cfg file with following parameter: > > title gns > kernel /dev/fs/ext2@usb0/vmlinuz > args console=tty quiet root=/dev/sdb2 > > This is a first try and the configuration should be fine-tuned and > optimized. For instance, the cputemperature can be quite hot (approx. > 85°C), which results apparently in a kernel panick in the next > reboot, until th system get cooler and boots normally. > > At the moment, there is no wifi, no swap partition, and no Xorg.
Promising, yet we'll still have a long way to go before it's user ready then. Christophe tells us that 3A patches are going into Linux soon [a]. That should make our job a lot easier. [a] http://gnewsense.org/Projects/GNewSenseToMIPS-3A?action=diff&rev1=12&rev2=13 _______________________________________________ gNewSense-dev mailing list gNewSense-dev@nongnu.org https://lists.nongnu.org/mailman/listinfo/gnewsense-dev