On Dec 24, 2004, at 9:30 PM, jsf wrote:
Linksys.. basically, the same firmware it came with (plus a firmware update)
I'd assign the laptop the router's IP address and remove the router to figure out whether it can respond on port 80 - if you can telnet to port 80 on the router's IP from your server in Boston you'll at least know that your laptop is OK.
I've tried that... the laptop has no problem responding on port 80 if it's connected directly to the Cable Modem...
If it were mine I'd flash it with ewrt firmware and enable ssh so you can get on it and see what's happening inside.
There's probably an iptables rule you can modify to get it running, but that might require a recompile to be persistant.
-Bill
_______________________________________________ gnhlug-discuss mailing list [email protected] http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss
