On Mon, Jul 14, 2008 at 9:13 PM, James R. Van Zandt <[EMAIL PROTECTED]> wrote: > Filesystem type is ext2fs, partition type 0x83
That is good, it means GRUB found your filesystem. > kernel /vmlinuz-1.6.20-1.2944.fc6 ro root=/dev/VolGroup00/LogVol00 rhgb > quiet irqpoll You've got a typo in the above. "1.6.20" should be "2.6.20". If that's your actual kernel command (and not merely a transcription error), that's your problem. > Error 15: File not found That means that GRUB found the filesystem, but didn't find one of the files you specified in the filesystem. > "smartctl --all /dev/sda" reported: > > I was disappointed about this brand new drive not supporting SMART and > decided to return it. You might need to tell smartctl the device is an ATA type: smartctl --device=ata --all /dev/sda > kernel /vmlinuz-2.6.20-1.2944.fc6 ro root=/dev/VolGroup00/LogVol00 > rhgb quiet > initrd /initrd-2.6.20-1.2944.fc6.img The other thing you can do is get to the GRUB command prompt and use the GRUB "find" command to see if GRUB can find the files you're asking for. Like so: grub> find /vmlinuz-2.6.20-1.2944.fc6 grub> find /initrd-2.6.20-1.2944.fc6.img -- Ben _______________________________________________ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/
