Today, [EMAIL PROTECTED] gleened this insight:
> I swapped motherboards between 2 of my linux machines
> both machines were running RH 6.0 at the time, and booted fine from
> their hard disks
> after swapping boards I had to use a boot floppy to boot the machines.
> after running lilo both machines still failed to boot from the hard disk
> I get 'LI' and nothing else.
I would also check the partition tables, and make sure the respective
partitions are marked as bootable (which they should still be if they were
before) and then I would check your BIOS settings to make sure your boot
sequence includes the drives you're trying to boot from...
--
PGP/GPG Public key at http://cerberus.ne.mediaone.net/~derek/pubkey.txt
------------------------------------------------------
Derek D. Martin | Unix/Linux Geek
[EMAIL PROTECTED] | [EMAIL PROTECTED]
------------------------------------------------------
**********************************************************
To unsubscribe from this list, send mail to
[EMAIL PROTECTED] with the following text in the
*body* (*not* the subject line) of the letter:
unsubscribe gnhlug
**********************************************************
