hi :)
> > > > Sorry but I'm a bit puzzled by your tests, what you are trying to > > achieve and what works and what doesn't. > > I am a VOIP beginner...so not all things I try might make sense. > No worries, the setup is not complex. But I'm lost in the explanations. > > > > Things seem however simple. > > > > You have 2 cases. Imagine that you have machine A and B, and gateway C. > > If you get a call from C to A and want to forward it to B through C > > then you simply put B as forward host, C as gateway, and enable "use > > gateway", or you use no gateway and use h323:[EMAIL PROTECTED] as forward > > URL, you > > will do this on A. > > That is not what I want to do. > > > > > If you get a call from C to A and want to forward it to B, without using > > C, then you simply put B as forward host and that's all. You will do > > this on A. > > > > That is what I want to achieve. > OK, in that case, what you have to do is : - do not use a gateway - put the IP of the destination of the call forward in the call forwarding box (h323:XXX.XXX.XXX.XXX) - enable call forwarding > The log (I am surprised that there is no indication at all about the > forward_host 118.145.140.124): > > 2005/02/24 23:27:35.760 5:26:20.313 H323 Listener:83340e8 H323TCP > Started connection: host=::ffff:118.152.191.172:3201, > if=118.152.251.114:1720, handle=45 118.152.251.114 is the local address of the GM that is forwarding the call it just received. > 2005/02/24 23:27:35.783 5:26:20.336 H225 Answer:88f15a8 H323 > Created new connection: ip$[::ffff:118.152.191.172]:3201/164 > 2005/02/24 23:27:35.783 5:26:20.337 H225 Answer:88f15a8 H225 > Handling PDU: Setup callRef=164 > 2005/02/24 23:27:35.784 5:26:20.337 H225 Answer:88f15a8 H245 > Stopping MasterSlaveDetermination: state=Idle > 2005/02/24 23:27:35.785 5:26:20.338 H225 Answer:88f15a8 H245 > Stopping TerminalCapabilitySet: state=Idle > 2005/02/24 23:27:35.785 5:26:20.338 H225 Answer:88f15a8 H225 Set > remote application name: "Cisco IOS 12.x 181/18" > 2005/02/24 23:27:35.785 5:26:20.339 H225 Answer:88f15a8 H225 Set > protocol version to 2 and implying H.245 version 3 > 2005/02/24 23:27:35.786 5:26:20.339 H225 Answer:88f15a8 H225 > Sending call proceeding PDU > 2005/02/24 23:27:35.788 5:26:20.341 H225 Answer:88f15a8 H225 > Sending PDU: callProceeding > 2005/02/24 23:27:35.798 5:26:20.351 H225 Answer:88f15a8 H225 > Sending PDU: facility > 2005/02/24 23:27:35.799 5:26:20.352 H225 Answer:88f15a8 H323 > Clearing connection ip$[::ffff:118.152.191.172]:3201/164 > reason=EndedByNoAccept > 2005/02/24 23:27:35.800 5:26:20.353 H225 Answer:88f15a8 H323 Call > end reason for ip$[::ffff:118.152.191.172]:3201/164 set to EndedByNoAccept > 2005/02/24 23:27:35.800 5:26:20.353 H225 Answer:88f15a8 H225 The call is not forwarded, it is rejected. Can you watch what happens in the "General History"? What happens in the GUI when you activate call forwarding, isn't there an error message? -- _ Damien Sandras (o- GnomeMeeting: http://www.gnomemeeting.org/ //\ FOSDEM 2005 : http://www.fosdem.org v_/_ H.323 phone : callto:ils.seconix.com/[EMAIL PROTECTED] _______________________________________________ GnomeMeeting-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/gnomemeeting-list
