> I am running GM 1.2.1 in a FC4 pc with kernel 2.6.12-1.1387_FC4. This pc > (a desktop one) has a Netgear WC311 usb wifi network card, with a > ndiswrapper 1.2.0 driver. > The wifi works ok with all apps, and GM works ok when not working on > wireless (and with a fixed ip assigned). > When mixing the two (gm & wifi), I assign in the router a fixed ip > address for this pc, and forward all packets to port 1720 to the port > 1720 on this fixed ip. I also run GM's druid and configure thru it the > NAT support. Then I have no problems calling the robot at > h323.voxgratia.org. But when somebody calls me (by calling the router), > I can see its video and hear it for a few seconds, but then the wifi > driver goes nuts, it loses route information ($route just freezes),and > I am no longer able to make wifi work without restarting the pc (ifdown > and ifup simply freeze). > > This could be either > - a problem with the wifi driver (in that case I would like to know of > other usb card that works well with FC and GM, and I will buy it) > - a problem with my setting of NAT, in that case I will appreciate any > help :) >
If it works for a few seconds and if you have no problem with the robot, then I think it is not a NAT problem. I think you forward only port 1720, and what is the result of the NAT test? CONE NAT? If so, then the problem is on the WIFI driver side and I suggest you to : - try without video and see if it works (perhaps too much upload puzzles the driver) - contact the author of the driver > Thx > Claudio > > _______________________________________________ > GnomeMeeting-list mailing list > [email protected] > http://mail.gnome.org/mailman/listinfo/gnomemeeting-list > _______________________________________________ GnomeMeeting-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/gnomemeeting-list
