debug -1 enabled as below - at end:
2006/03/09 14:59:36.441 0:03.394 ekiga GnomeMeeting version 1.99.1
2006/03/09 14:59:36.442 0:03.395 ekiga OPAL version unknown
2006/03/09 14:59:36.442 0:03.397 ekiga PWLIB version 1.9.3
2006/03/09 14:59:36.444 0:03.397 ekiga GNOME support enabled
2006/03/09 14:59:36.445 0:03.398 ekiga Fullscreen support enabled
2006/03/09 14:59:36.445 0:03.399 ekiga DBUS support disabled
2006/03/09 14:59:36.474 0:03.427 ekiga Set TCP port range to 3000030010
2006/03/09 14:59:36.474 0:03.427 ekiga Set RTP port range to 50005059
2006/03/09 14:59:36.475 0:03.430 ekiga Set UDP port range to 50605100
2006/03/09 14:59:36.832 0:03.785 ekiga Listen Error in UDP listen: Address already in use
2006/03/09 14:59:36.834 0:03.787 ekiga Listen Could not start any UDP listeners
2006/03/09 14:59:36.835 0:03.788 ekiga OpalEP Could not start listener: udp$192.168.2.2:5060
2006/03/09 14:59:36.906 0:03.859 ekiga AVAHI Error initializing Avahi: %sDaemon not running
It state the address is already in use. With no IM clients or Ekiga or any other SIP softphone running anywhere on the network I checked via nmap to see what would be using the 5060 port as below (it is the same even with Ekiga running)
:~$ nmap 192.168.2.2 -p 5060
Starting Nmap 3.95 ( http://www.insecure.org/nmap/ ) at 2006-03-09 15:07 GMT
Interesting ports on 192.168.2.2:
PORT STATE SERVICE
5060/tcp closed sip
Increasing range to 5060-5100 - same result, all ports closed - so there's nothing using those ports.
I don't know what's causing the problem or how to find out what's "using" those ports, although I do realise that I am using a distro that is still in active development
Hope you can help.
Many thanks
Joseph Gwynne-Jones
_______________________________________________ GnomeMeeting-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/gnomemeeting-list
