Reading, about all these installation troubles, I reach
the same conclusion as I've mentioned before:
It's a bad idea to install the Windows programs (MiKTeX,
Ghostscript+Gsview and Python) using .tar.gz files plus
a list of registry settings. All these programs come with
well-maintained installation programs. It must be possible
to call an external program from within the cygwin installer,
why not simply let it download and run the respective
install.exe files for the programs. As far as I can see,
this should solve all the problems mentioned below (except
for the misprint in lily-miktex.sh).
In the meantime, I recommend people who experience any problems
with the Lilypond installation to first install MiKTeX and
Ghostscript+friends manually and then run the Lilypond
installation script.
/Mats
> Notes on 'virgin' install of cygwin and lilypond 1.4.4:
>
> First, I tried to make my win2K machine clean of all old lilypond,
> cygwin, gsview, ghostview and miktex stuff, so I could install cygwin
> and lilypond 1.4.4 afresh. Notes on what I did to clean up my system
> below, immediate actions needed to get 1.4.4 working here:
>
> -Profiles
> The file lily-miktex.sh still contains the error:
> c=texmf="/usr/windows/MiKTeX"
> which causes an error when LaTeX is called (or any other MiKTeX
> program).
> The fix has been discussed here before, simply removing the
> texmf=
> portion allows the following loop to properly assign the directory.
>
> -Once latex.exe can be found, ly2dvi still exits with an error.
> The cause is that miktex hasn't been configured properly. Going to
> /usr/windows/MiKTeX/miktex/config
> and running config.bat spams the window with lots of output,
> but after that, ly2dvi -P example-1.ly completes without error
> and produces the desired files. (can this be automated?)
>
> -running >gsview32 example-1.ps brings up gsview32 with the following
> box:
> Ghostscript cannot be found on your computer. You will need
> to download and install ghostscript from
> <begin text box>
> http://www.cs.wisc.edu/~ghost/
> <end box>
> <download now> <cancel> <help>
>
> Cancelling this box and going through the registration nag box,
> you can select the options/advanced config menu, and enter the
> following:
>
> c:\cygwin\usr\windows\gs\gs6.50\bin\gsdll32.dll
> C:\cygwin\usr\windows\gs\gs6.50\lib;C:\cygwin\usr\windows\gs\fonts
>
> The third box on this requestor didn't seem to need changing, but could
> indicate that I have more things to eradicate before I have a virgin
> install.
>
> However, at this point, gsview32 displays example-1.ps just fine!
>
> (Whether this can be automated or fixed with external path or
> environmental directives is beyond me. Someday, I will actually know
> what I'm doing! (of course, by then, I'll be doing something
> different...))
>
> Notes on cleaning out Win2K:
>
> We can all expect that by the time Lilypond is out of beta, the
> installers will ensure that an installation
> or upgrade will ensure that the entire system is set up properly,
> without interference from preexisting
> installations. Until that time, for windows users, here is my own
> procedure for arriving at a
> fairly-virgin starting point:
>
> Beneficial note: I generally maintain a local directory of install
> files. This is easy, with the 'download
> to local directory' option in setup.exe. I keep the cygwin and lilypond
> install directories separate, although this
> might not be necessary. I recommend this, if you have the disk space
> (and who doesn't these days? It only takes about 90 megs
> as of this writing, and is very likely to make life easier if you have
> to reinstall from scratch.
>
> Uninstalling old versions:
>
> Run lilypond setup.exe using what ever you used for the original install
> (ie, I ran setup and
> downloaded from internet to a local directory, then ran it again to
> install from local directory.
> The appropriate action would be to `install from local directory').
> Click the full/part button
> for a complete listing, then click each entry to 'skip' or 'uninstall'
> as appropriate. ( they seem to be
> mutually exclusive.) Complete to uninstall what is there.
>
> Do the same for the cygwin setup.exe.
>
> Run start/settings/control panel/"add/remove programs" and ensure that
> any vestigial miktex, gsview or ghostgum or
> ghostscript, python, cygwin, or any other programs associated with
> cygwin and/or lilypond are removed.
>
> [Disclaimer: abuse of Regedit can damage your computer's ability to
> boot, run programs, and function reasonably even
> more than installing windows 95/98/nt/2K does! Do not use regedit if you
> don't understand what you are doing, and
> don't think you can hold me liable because I say to use it here: I'm
> only actually saying I used it, and I'm not even
> encouraging anyone else to do so!]
>
> With regedit (or some other appropriate tool) remove all registry
> entries related to cygwin and lilypond.
> In each case, search on the search text, and delete the highest folder
> in the tree with a recognizeable
> reference to the associated software:
> search text associated software
> lily lilypond
> python python
> MiK MiKTeX
> cygwin cygwin
> This set seems to be sufficient. (note that the c:\gs directory and
> possible others might have to be expunged.)
>
> NOTE: You can modify the path strings from here. If you do, you don't
> have to do it later. But if you do it wrong,
> all the same disclaimers apply.
>
> Move any files of importance to you out of the cygwin tree (such as
> /home/<user dir>) and delete c:\cygwin
>
> Delete any directory trees under C:\program files\ for MiKTeX, Python,
> ghostview/gsview/ghostgum.
>
> Clean up the PATH and other environment variables. (This can be accessed
> by right clicking my computer and selecting
> properties. THe resultant window has tabs on it. In win2K, the relevant
> tab is 'advanced', and the middle button
> leads to the environment strings. I don't remember what it is in win98
> anymore, but it should probably be from a
> button on the last tab.) Ensure that all references to cygwin, MiKTeX,
> python, ghost* are gone.
>
> NOTE the disclaimers above!
>
> Now, it the system should be cleansed.
>
>
> Update your store of install files by running setup.exe for lilypond
> (and/or cygwin), and install afresh.
>
> _______________________________________________
> Gnu-music-discuss mailing list
> [EMAIL PROTECTED]
> http://mail.gnu.org/mailman/listinfo/gnu-music-discuss
>
_______________________________________________
Gnu-music-discuss mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/gnu-music-discuss
