Your welcome.
‘font’ declarations are for the actual font name/family. They can be used
however as a ’shorthand’ property with more info. But for it to work, you have
to specify at least a size and name/family. (other options are style, variant
and weight)
So:
* {
font: 12px;
}
won’t work, but this should:
* {
font: 12px “Arial, Helvetica, sans-serif";
}
Personally, I prefer standard declarations as the shorthand versions are prone
to quirks and since gtk+3 isn’t a necessarily faithful/complete implementation
of web css, some might not work at all.
I’ll take a look at the wiki and adjust it as necessary for clarity and
offering the most likely solutions to work.
Regards,
Adrien
> On Oct 1, 2018, at 4:59 PM, Greg Etling <getl...@gmail.com> wrote:
>
> Adrien,
>
> Thank you for this. I compared and tested against what is on the Wiki page
> (using my phone to avoid the blacklist!), and what you sent worked. Note for
> others, at least with Gnucash 3.2 and 3.3 and OSX High Sierra, 'font-size'
> worked while 'font' (as recommended on the wiki) had no effect.
>
> Side effect of installing 3.3 - when I downgraded to 3.2, all of my graphs
> are too wide when set at 100% width. They are fine now that I've been able to
> re-upgrade thanks to this workaround, but just noting the behavior for anyone
> else switching between the two versions.
>
> Greg
> 917-664-0083
> http://gregetling.com
> --
> "The credit belongs to the man who is actually in the arena, whose face is
> marred by dust and sweat and blood; who strives valiantly; who errs, who
> comes short again and again, because there is no effort without error and
> shortcoming" -Theodore Roosevelt
>
> On Mon, Oct 1, 2018 at 3:07 PM, Adrien Monteleone
> <adrien.montele...@lusfiber.net> wrote:
> Greg,
>
> I don’t use the .ini method on Mac (is that not just for Windows?) but I can
> attest that a custom css file works fine.
>
> Create a file called gtk-3.0.css and store it in “~/Library/Application
> Support/Gnucash”
>
> Use the following css declaration to alter *all* fonts used in the UI.
>
> * {
> font-size: 12px;
> }
>
> Set the size as desired if 12px doesn’t appeal to you. You may need to
> restart Gnucash between edits to see the changes.
>
> If you want to target only specific UI elements, you’ll need to use the
> gtk-inspector to figure out the proper element names/classes to target.
>
> Regards,
> Adrien
>
> > On Oct 1, 2018, at 1:27 PM, Geert Janssens <geert.gnuc...@kobaltwit.be>
> > wrote:
> >
> > Greg,
> >
> > The blacklisted IP is something to take up with Derek (Derek Atkins
> > <warl...@mit.edu>). He manages the infrastructure that runs the wiki.
> >
> > I don't think there have been changes in the code itself, but the wiki has
> > been updated to be more detailed with regards to expected file locations on
> > different platforms. As I don't have access to a recent enough Mac I can't
> > verify any of these details myself though.
> >
> > Others may have hands on experience.
> >
> > Geert
> >
> > Op maandag 1 oktober 2018 19:31:16 CEST schreef Greg Etling:
> >> Two items:
> >>
> >>
> >> 1. For some reason my home IP has been blacklisted and I've been unable
> >> to access wiki.gnucash.org for some time now. So I cannot reconfirm
> >> point 2 but working from memory...
> >> 2. I have previously tried to set some font settings through the
> >> settings.ini on 3.x and been entirely unsuccessful in seeing any changes
> >> reflected in the UI. Are there fixes to this issue in the Mac version of
> >> 3.3 that would make this more reliable than with 3.2?
> >>
> >>
> >>
> >> Greg
> >> 917-664-0083
> >> http://gregetling.com
> >> --
> >> "The credit belongs to the man who is actually in the arena, whose face is
> >> marred by dust and sweat and blood; who strives valiantly; who errs, who
> >> comes short again and again, because there is no effort without error and
> >> shortcoming" -Theodore Roosevelt
> >>
> >>
> >> On Mon, Oct 1, 2018 at 8:45 AM Geert Janssens <geert.gnuc...@kobaltwit.be>
> >>
> >> wrote:
> >>> Op maandag 1 oktober 2018 13:37:12 CEST schreef Greg Etling:
> >>>> Apologies for threading/formatting issues as I was not subscribed to the
> >>>> list for this message.
> >>>>
> >>>> Is there any way to manually revert the size to 72/inch on Mac? The
> >>>
> >>> larger
> >>>
> >>>> font now causes major issues on my 13" pre-retina (1280x800) screen,
> >>>> including an inability to resize the window width to be less/equal to
> >>>> screen width. It's bad enough from a usability standpoint that I
> >>>> reverted
> >>>> to 3.2.
> >>>
> >>> You may set a custom default font size via gtk's settings.ini file:
> >>> https://wiki.gnucash.org/wiki/GTK3#Via_settings.ini
> >>>
> >>> Geert
> >>>
> >>>
> >>> _______________________________________________
> >>> gnucash-user mailing list
> >>> gnucash-user@gnucash.org
> >>> To update your subscription preferences or to unsubscribe:
> >>> https://lists.gnucash.org/mailman/listinfo/gnucash-user
> >>> If you are using Nabble or Gmane, please see
> >>> https://wiki.gnucash.org/wiki/Mailing_Lists for more information.
> >>> -----
> >>> Please remember to CC this list on all your replies.
> >>> You can do this by using Reply-To-List or Reply-All.
> >
> >
> >
> >
> > _______________________________________________
> > gnucash-user mailing list
> > gnucash-user@gnucash.org
> > To update your subscription preferences or to unsubscribe:
> > https://lists.gnucash.org/mailman/listinfo/gnucash-user
> > If you are using Nabble or Gmane, please see
> > https://wiki.gnucash.org/wiki/Mailing_Lists for more information.
> > -----
> > Please remember to CC this list on all your replies.
> > You can do this by using Reply-To-List or Reply-All.
> >
>
>
> _______________________________________________
> gnucash-user mailing list
> gnucash-user@gnucash.org
> To update your subscription preferences or to unsubscribe:
> https://lists.gnucash.org/mailman/listinfo/gnucash-user
> If you are using Nabble or Gmane, please see
> https://wiki.gnucash.org/wiki/Mailing_Lists for more information.
> -----
> Please remember to CC this list on all your replies.
> You can do this by using Reply-To-List or Reply-All.
>
_______________________________________________
gnucash-user mailing list
gnucash-user@gnucash.org
To update your subscription preferences or to unsubscribe:
https://lists.gnucash.org/mailman/listinfo/gnucash-user
If you are using Nabble or Gmane, please see
https://wiki.gnucash.org/wiki/Mailing_Lists for more information.
-----
Please remember to CC this list on all your replies.
You can do this by using Reply-To-List or Reply-All.
