Hi there, I got it running finally, had to update the config to turn off the gid and uid matching. attached is my current config :
now i am getting this error when publishing files : Jun 07 16:33:10-963033 util-818 ERROR `mkstemp' failed on file `/home/mdupont/.gnunet/fs/persistence//gnunet-fs-gtk/publish-file/kTDxvY' at disk.c:448 with error: Too many open files any ideas to increase that limit or to change the code to publish some files first, i think there are just too many. thanks, mike -- James Michael DuPont Member of Free Libre Open Source Software Kosova http://flossk.org Contributor FOSM, the CC-BY-SA map of the world http://fosm.org Mozilla Rep https://reps.mozilla.org/u/h4ck3rm1k3
Index: contrib/example-config/dns.conf =================================================================== --- contrib/example-config/dns.conf (revision 0) +++ contrib/example-config/dns.conf (revision 0) @@ -0,0 +1,44 @@ +[dns] +AUTOSTART = YES +HOSTNAME = localhost +HOME = $SERVICEHOME +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-service-dns +UNIXPATH = /tmp/gnunet-service-dns.sock + +# Access to this service can compromise all DNS queries in this +# system. Thus access should be restricted to the same UID. +# (see https://gnunet.org/gnunet-access-control-model) +UNIX_MATCH_UID = YES +UNIX_MATCH_GID = YES + +# As there is no sufficiently restrictive access control for TCP, +# we never use it, even if # is not set (just to be safe) +# PORT = 0 + +# This option should be set to YES to allow the DNS service to +# perform lookups against the locally configured DNS resolver. +# (set to "NO" if no normal ISP is locally available and thus +# requests for normal ".com"/".org"/etc. must be routed via +# the GNUnet VPN (the GNUNET PT daemon then needs to be configured +# to intercept and route DNS queries via mesh). +PROVIDE_EXIT = YES + +# Name of the virtual interface we use to intercept DNS traffic. +IFNAME = gnunet-dns + +# Use RFC 3849-style documentation IPv6 address (RFC 4773 might provide an alternative in the future) +# FIXME: or just default to a site-local address scope as we do for VPN!? +IPV6ADDR = 2001:DB8::1 +IPV6PREFIX = 126 + +# Use RFC 3927-style link-local address +IPV4ADDR = 169.254.1.1 +IPV4MASK = 255.255.0.0 + +# Enable GNUnet-wide DNS-EXIT service by setting this value to the IP address (IPv4 or IPv6) +# of a DNS resolver to use. Only works if "PROVIDE_EXIT" is also set to YES. Must absolutely +# NOT be an address of any of GNUnet's virtual tunnel interfaces. Use a well-known +# public DNS resolver or your ISP's resolver from /etc/resolv.conf. +# DNS_EXIT = 8.8.8.8 + Index: contrib/example-config/nse.conf =================================================================== --- contrib/example-config/nse.conf (revision 0) +++ contrib/example-config/nse.conf (revision 0) @@ -0,0 +1,25 @@ +[nse] +AUTOSTART = YES +#PORT = 2097 +HOSTNAME = localhost +HOME = $SERVICEHOME +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-service-nse +ACCEPT_FROM = 127.0.0.1; +ACCEPT_FROM6 = ::1; +UNIXPATH = /tmp/test-nse-service-nse.unix +UNIX_MATCH_UID = NO +UNIX_MATCH_GID = NO +PROOFFILE = $SERVICEHOME/.nse-proof +HISTOGRAM = $SERVICEHOME/nse-history.log + +# How 'slowly' should the proof-of-work be constructed (delay +# between rounds); sane values between 0 and ~1000. +WORKDELAY = 5 ms + +# Note: changing any of the values below will make this peer +# completely incompatible with other peers! +INTERVAL = 1 h +# 26 is about 10 minutes on a modern i7 (single-core) +WORKBITS = 26 + Index: contrib/example-config/datastore.conf =================================================================== --- contrib/example-config/datastore.conf (revision 0) +++ contrib/example-config/datastore.conf (revision 0) @@ -0,0 +1,33 @@ +[datastore] +AUTOSTART = YES +UNIXPATH = /tmp/gnunet-service-datastore.sock +UNIX_MATCH_UID = NO +UNIX_MATCH_GID = NO +# PORT = 2093 +HOSTNAME = localhost +HOME = $SERVICEHOME +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-service-datastore +ACCEPT_FROM = 127.0.0.1; +ACCEPT_FROM6 = ::1; +QUOTA = 100 MB +BLOOMFILTER = $SERVICEHOME/datastore/bloomfilter +DATABASE = sqlite +# DISABLE_SOCKET_FORWARDING = NO + +[datastore-sqlite] +FILENAME = $SERVICEHOME/datastore/sqlite.db + +[datastore-postgres] +CONFIG = connect_timeout=10; dbname=gnunet + +[datastore-mysql] +DATABASE = gnunet +CONFIG = ~/.my.cnf +# USER = gnunet +# PASSWORD = +# HOST = localhost +# PORT = 3306 + + + Index: contrib/example-config/gns.conf =================================================================== --- contrib/example-config/gns.conf (revision 0) +++ contrib/example-config/gns.conf (revision 0) @@ -0,0 +1,24 @@ +[gns] +AUTOSTART = YES +HOSTNAME = localhost +HOME = $SERVICEHOME +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-service-gns +UNIXPATH = /tmp/gnunet-service-gns.sock +ZONEKEY = $SERVICEHOME/gns/zonekey.zkey +HIJACK_DNS = NO +AUTO_IMPORT_PKEY = YES +AUTO_IMPORT_CONFIRMATION_REQ = NO +MAX_PARALLEL_BACKGROUND_QUERIES = 25 +DEFAULT_LOOKUP_TIMEOUT = 10 +RECORD_PUT_INTERVAL = 60 +ZONE_PUT_INTERVAL = 900 + +[fcfsd] +HTTPPORT = 18080 +ZONEKEY = $SERVICEHOME/fcfsd/zonekey.zkey +HOSTNAME = localhost +HOME = $SERVICEHOME +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-gns-fcfsd + Index: contrib/example-config/ats.conf =================================================================== --- contrib/example-config/ats.conf (revision 0) +++ contrib/example-config/ats.conf (revision 0) @@ -0,0 +1,38 @@ +[ats] +AUTOSTART = YES +# PORT = 2098 +HOSTNAME = localhost +HOME = $SERVICEHOME +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-service-ats +ACCEPT_FROM = 127.0.0.1; +ACCEPT_FROM6 = ::1; +UNIXPATH = /tmp/gnunet-service-ats.sock +UNIX_MATCH_UID = NO +UNIX_MATCH_GID = NO + +# Enable MLP mode (default: NO) +MLP = NO +# Network specific inbound/outbound quotas +# LOOPBACK +LOOPBACK_QUOTA_IN = unlimited +LOOPBACK_QUOTA_OUT = unlimited +# LAN +LAN_QUOTA_IN = unlimited +LAN_QUOTA_OUT = unlimited +# WAN +WAN_QUOTA_IN = 64 KiB +WAN_QUOTA_OUT = 64 KiB +# WLAN +WLAN_QUOTA_IN = 1 MiB +WLAN_QUOTA_OUT = 1 MiB +# ATS options + +DUMP_MLP = NO +DUMP_SOLUTION = NO +DUMP_OVERWRITE = NO +DUMP_MIN_PEERS = 0 +DUMP_MIN_ADDRS = 0 +DUMP_OVERWRITE = NO +ATS_MIN_INTERVAL = 15000 +ATS_EXEC_INTERVAL = 30000 Index: contrib/example-config/core.conf =================================================================== --- contrib/example-config/core.conf (revision 0) +++ contrib/example-config/core.conf (revision 0) @@ -0,0 +1,22 @@ +[core] +AUTOSTART = YES +#PORT = 2092 +HOSTNAME = localhost +HOME = $SERVICEHOME +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-service-core +ACCEPT_FROM = 127.0.0.1; +ACCEPT_FROM6 = ::1; +UNIXPATH = /tmp/gnunet-service-core.sock +UNIX_MATCH_UID = NO +UNIX_MATCH_GID = NO +# DISABLE_SOCKET_FORWARDING = NO +# DEBUG = YES +# USERNAME = +# MAXBUF = +# TIMEOUT = +# DISABLEV6 = +# BINDTO = +# REJECT_FROM = +# REJECT_FROM6 = +# PREFIX = Index: contrib/example-config/testbed.conf =================================================================== Index: contrib/example-config/statistics.conf =================================================================== --- contrib/example-config/statistics.conf (revision 0) +++ contrib/example-config/statistics.conf (revision 0) @@ -0,0 +1,22 @@ +[statistics] +AUTOSTART = YES +#PORT = 2088 +HOSTNAME = localhost +HOME = $SERVICEHOME +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-service-statistics +ACCEPT_FROM = 127.0.0.1; +ACCEPT_FROM6 = ::1; +UNIXPATH = /tmp/gnunet-service-statistics.sock +UNIX_MATCH_UID = NO +UNIX_MATCH_GID = NO +# DISABLE_SOCKET_FORWARDING = NO +# USERNAME = +# MAXBUF = +# TIMEOUT = +# DISABLEV6 = +# BINDTO = +# REJECT_FROM = +# REJECT_FROM6 = +# PREFIX = + Index: contrib/example-config/transport.conf =================================================================== --- contrib/example-config/transport.conf (revision 0) +++ contrib/example-config/transport.conf (revision 0) @@ -0,0 +1,69 @@ +[transport] +AUTOSTART = YES +# PORT = 2091 +HOSTNAME = localhost +HOME = $SERVICEHOME +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-service-transport +#PREFIX = valgrind +NEIGHBOUR_LIMIT = 50 +ACCEPT_FROM = 127.0.0.1; +ACCEPT_FROM6 = ::1; +PLUGINS = tcp udp +UNIXPATH = /tmp/gnunet-service-transport.sock +BLACKLIST_FILE = $SERVICEHOME/blacklist +# This could possibly be relaxed +UNIX_MATCH_UID = NO +UNIX_MATCH_GID = NO +# DISABLE_SOCKET_FORWARDING = NO +# USERNAME = +# MAXBUF = +# TIMEOUT = +# DISABLEV6 = +# BINDTO = +# REJECT_FROM = +# REJECT_FROM6 = +# PREFIX = valgrind --leak-check=full + +[transport-unix] +PORT = 22086 + +[transport-tcp] +# Use 0 to ONLY advertise as a peer behind NAT (no port binding) +PORT = 2086 +ADVERTISED_PORT = 2086 + +# Maximum number of open TCP connections allowed +MAX_CONNECTIONS = 128 + +TIMEOUT = 5 s +# ACCEPT_FROM = +# ACCEPT_FROM6 = +# REJECT_FROM = +# REJECT_FROM6 = +# BINDTO = +MAX_CONNECTIONS = 128 + +[transport-udp] +PORT = 2086 +BROADCAST = YES +BROADCAST_INTERVAL = 30000 +MAX_BPS = 1000000 + +[transport-http] +PORT = 1080 +MAX_CONNECTIONS = 128 + +[transport-https] +PORT = 4433 +CRYPTO_INIT = NORMAL +KEY_FILE = https.key +CERT_FILE = https.cert +MAX_CONNECTIONS = 128 + +[transport-wlan] +# Name of the interface in monitor mode (typically monX) +INTERFACE = mon0 +# Real hardware, no testing +TESTMODE = 0 + Index: contrib/example-config/mesh.conf =================================================================== --- contrib/example-config/mesh.conf (revision 0) +++ contrib/example-config/mesh.conf (revision 0) @@ -0,0 +1,13 @@ +[mesh] +AUTOSTART = YES +# PORT = 2096 +HOSTNAME = localhost +HOME = $SERVICEHOME +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-service-mesh +ACCEPT_FROM = 127.0.0.1; +ACCEPT_FROM6 = ::1; +UNIXPATH = /tmp/gnunet-service-mesh.sock +UNIX_MATCH_UID = NO +UNIX_MATCH_GID = NO + Index: contrib/example-config/datacache.conf =================================================================== --- contrib/example-config/datacache.conf (revision 0) +++ contrib/example-config/datacache.conf (revision 0) @@ -0,0 +1,10 @@ +[datacache-mysql] +DATABASE = gnunet +CONFIG = ~/.my.cnf +# USER = gnunet +# PASSWORD = +# HOST = localhost +# PORT = 3306 + +[datacache-postgres] +CONFIG = connect_timeout=10; dbname=gnunet Index: contrib/example-config/namestore.conf =================================================================== --- contrib/example-config/namestore.conf (revision 0) +++ contrib/example-config/namestore.conf (revision 0) @@ -0,0 +1,31 @@ +[namestore] +AUTOSTART = YES +UNIXPATH = /tmp/gnunet-service-namestore.sock +UNIX_MATCH_UID = NO +UNIX_MATCH_GID = NO +# PORT = 2099 +HOSTNAME = localhost +HOME = $SERVICEHOME +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-service-namestore +ACCEPT_FROM = 127.0.0.1; +ACCEPT_FROM6 = ::1; +DATABASE = sqlite +ZONEFILE_DIRECTORY = $SERVICEHOME/namestore/zonefiles + +[namestore-sqlite] +FILENAME = $SERVICEHOME/namestore/sqlite.db + +[namestore-postgres] +CONFIG = connect_timeout=10; dbname=gnunet + +[namestore-mysql] +DATABASE = gnunet +CONFIG = ~/.my.cnf +# USER = gnunet +# PASSWORD = +# HOST = localhost +# PORT = 3306 + + + Index: contrib/example-config/resolver.conf =================================================================== --- contrib/example-config/resolver.conf (revision 0) +++ contrib/example-config/resolver.conf (revision 0) @@ -0,0 +1,22 @@ +[resolver] +AUTOSTART = YES +#PORT = 2089 +HOSTNAME = localhost +HOME = $SERVICEHOME +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-service-resolver +ACCEPT_FROM = 127.0.0.1; +ACCEPT_FROM6 = ::1; +UNIXPATH = /tmp/gnunet-service-resolver.sock +UNIX_MATCH_UID = NO +UNIX_MATCH_GID = NO +# DISABLE_SOCKET_FORWARDING = NO +# USERNAME = +# MAXBUF = +# TIMEOUT = +# DISABLEV6 = +# BINDTO = +# REJECT_FROM = +# REJECT_FROM6 = +# PREFIX = + Index: contrib/example-config/vpn.conf =================================================================== --- contrib/example-config/vpn.conf (revision 0) +++ contrib/example-config/vpn.conf (revision 0) @@ -0,0 +1,21 @@ +[vpn] +AUTOSTART = YES +# PORT = 0 +HOSTNAME = localhost +HOME = $SERVICEHOME +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-service-vpn +ACCEPT_FROM = 127.0.0.1; +ACCEPT_FROM6 = ::1; +UNIXPATH = /tmp/gnunet-service-vpn.sock +UNIX_MATCH_UID = NO +UNIX_MATCH_GID = NO + +IPV6ADDR = 1234::1 +IPV6PREFIX = 32 +IPV4ADDR = 10.11.10.1 +IPV4MASK = 255.255.0.0 +VIRTDNS = 10.11.10.2 +VIRTDNS6 = 1234::17 +IFNAME = vpn-gnunet + Index: contrib/example-config/peerinfo.conf =================================================================== --- contrib/example-config/peerinfo.conf (revision 0) +++ contrib/example-config/peerinfo.conf (revision 0) @@ -0,0 +1,24 @@ +[peerinfo] +AUTOSTART = YES +# PORT = 2090 +HOSTNAME = localhost +HOME = $SERVICEHOME +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-service-peerinfo +ACCEPT_FROM = 127.0.0.1; +ACCEPT_FROM6 = ::1; +UNIXPATH = /tmp/gnunet-service-peerinfo.sock +UNIX_MATCH_UID = NO +UNIX_MATCH_GID = NO +# DISABLE_SOCKET_FORWARDING = NO +# USERNAME = +# MAXBUF = +# TIMEOUT = +# DISABLEV6 = +# BINDTO = +# REJECT_FROM = +# REJECT_FROM6 = +# PREFIX = +HOSTS = $SERVICEHOME/data/hosts/ + + Index: contrib/example-config/fs.conf =================================================================== --- contrib/example-config/fs.conf (revision 0) +++ contrib/example-config/fs.conf (revision 0) @@ -0,0 +1,33 @@ +[fs] +AUTOSTART = YES +INDEXDB = $SERVICEHOME/fs/idxinfo.lst +TRUST = $SERVICEHOME/fs/credit/ +IDENTITY_DIR = $SERVICEHOME/fs/identities/ +STATE_DIR = $SERVICEHOME/fs/persistence/ +UPDATE_DIR = $SERVICEHOME/fs/updates/ +# PORT = 2094 +HOSTNAME = localhost +HOME = $SERVICEHOME +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-service-fs +ACCEPT_FROM = 127.0.0.1; +ACCEPT_FROM6 = ::1; + +DELAY = YES +CONTENT_CACHING = YES +CONTENT_PUSHING = YES + +UNIXPATH = /tmp/gnunet-service-fs.sock +UNIX_MATCH_UID = NO +UNIX_MATCH_GID = NO +DEBUG = YES +MAX_PENDING_REQUESTS = 65536 +# Maximum frequency we're allowed to poll the datastore +# for content for migration (can be used to reduce +# GNUnet's disk-IO rate) +MIN_MIGRATION_DELAY = 100 ms +EXPECTED_NEIGHBOUR_COUNT = 128 + +# Enable monkey? +PREFIX = + Index: contrib/example-config/hostlist.conf =================================================================== --- contrib/example-config/hostlist.conf (revision 0) +++ contrib/example-config/hostlist.conf (revision 0) @@ -0,0 +1,15 @@ +[hostlist] +# port for hostlist http server +HTTPPORT = 8080 +HOME = $SERVICEHOME +HOSTLISTFILE = $SERVICEHOME/hostlist/learned.data +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-daemon-hostlist +# consider having "-e" as default as well once implemented +OPTIONS = -b +SERVERS = http://v9.gnunet.org/hostlist http://ioerror.gnunet.org:65535/ +# proxy for downloading hostlists +HTTP-PROXY = +# bind hostlist http server to a specific IPv4 or IPv6 +# BINDTOIP = + Index: contrib/example-config/exit.conf =================================================================== --- contrib/example-config/exit.conf (revision 0) +++ contrib/example-config/exit.conf (revision 0) @@ -0,0 +1,47 @@ +[exit] +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-daemon-exit + +# IPv6 address for the TUN interface (must be changed as this +# must be within the global IPv6 range of your system!) +IPV6ADDR = 2001:DB8::1 + +# Prefix for our IPv6 subnet on the TUN interface. +IPV6PREFIX = 64 + +# IPv4 address to use on our TUN interface (may need to be +# changed to avoid conflicts with existing addresses on your system). +# Use RFC 3927-style link-local address +IPV4ADDR = 169.254.86.1 + +# Netmask for the IPv4 subnet on the TUN interface. +IPV4MASK = 255.255.255.0 + + +# Name of the (virtual) tunnel interface the exit daemon will manage +TUN_IFNAME = exit-gnunet + +# Name of the "real" interface that IPv4 traffic from this system will +# leave from; this is the name of the interface where we need to +# enable NAT on postrouting (typically something like 'eth0' or 'eth1' +# or 'wlan0'). Not needed if EXIT_IPv4 is disabled AND if all +# offered services run on 'localhost'. In this case, the value +# of the option can instead be set to "%" (to not enable NAT on any +# interface). +EXIT_IFNAME = eth0 + +# Set this to YES to allow exiting this system via IPv4 to the Internet +EXIT_IPV4 = NO + +# Set this to YES to allow exiting this system via IPv6 to the Internet +EXIT_IPV6 = NO + +# For IPv4-services offered by this peer, we need to at least enable IPv4 +ENABLE_IPV4 = YES + +# For IPv6-services offered by this peer, we need to at least enable IPv6 +ENABLE_IPV6 = YES + + +# Maximum number of concurrent connections this exit supports. +MAX_CONNECTIONS = 256 Index: contrib/example-config/template.conf =================================================================== --- contrib/example-config/template.conf (revision 0) +++ contrib/example-config/template.conf (revision 0) @@ -0,0 +1,21 @@ +[template] +AUTOSTART = NO +PORT = 9999 +HOSTNAME = localhost +HOME = $SERVICEHOME +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-service-template +ACCEPT_FROM = 127.0.0.1; +ACCEPT_FROM6 = ::1; +UNIXPATH = /tmp/gnunet-service-template.sock +UNIX_MATCH_UID = NO +UNIX_MATCH_GID = NO +# DISABLE_SOCKET_FORWARDING = NO +# USERNAME = +# MAXBUF = +# TIMEOUT = +# DISABLEV6 = +# BINDTO = +# REJECT_FROM = +# REJECT_FROM6 = +# PREFIX = Index: contrib/example-config/topology.conf =================================================================== --- contrib/example-config/topology.conf (revision 0) +++ contrib/example-config/topology.conf (revision 0) @@ -0,0 +1,10 @@ +[topology] +MINIMUM-FRIENDS = 0 +FRIENDS-ONLY = NO +AUTOCONNECT = YES +TARGET-CONNECTION-COUNT = 16 +FRIENDS = $SERVICEHOME/friends +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-daemon-topology + + Index: contrib/example-config/testing.conf =================================================================== --- contrib/example-config/testing.conf (revision 0) +++ contrib/example-config/testing.conf (revision 0) @@ -0,0 +1,11 @@ +[TESTING] +# How long before failing a connection? +CONNECT_TIMEOUT = 30 s +# How many connect attempts should we make? +CONNECT_ATTEMPTS = 3 +# How many connections can happen simultaneously? +MAX_OUTSTANDING_CONNECTIONS = 50 + +# Should we clean up the files on peer group shutdown? +DELETE_FILES = YES + Index: contrib/example-config/util.conf =================================================================== --- contrib/example-config/util.conf (revision 0) +++ contrib/example-config/util.conf (revision 0) @@ -0,0 +1,18 @@ +[PATHS] +#SERVICEHOME = ~/.gnunet/ +SERVICEHOME = /var/lib/gnunet/ +# DEFAULTCONFIG = /etc/gnunet.conf +# If 'DEFAULTCONFIG' is not defined, the current +# configuration file is assumed to be the default, +# which is what we want by default... + +[gnunetd] +HOSTKEY = $SERVICEHOME/.hostkey + +[client] +HOME = $SERVICEHOME + +[TESTING] +WEAKRANDOM = NO +SPEEDUP_INTERVAL = 0 ms +SPEEDUP_DELTA = 0 ms Index: contrib/example-config/dht.conf =================================================================== --- contrib/example-config/dht.conf (revision 0) +++ contrib/example-config/dht.conf (revision 0) @@ -0,0 +1,39 @@ +[dht] +AUTOSTART = YES +#PORT = 2095 +HOSTNAME = localhost +HOME = $SERVICEHOME +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-service-dht +ACCEPT_FROM = 127.0.0.1; +ACCEPT_FROM6 = ::1; +BUCKET_SIZE = 4 +UNIXPATH = /tmp/gnunet-service-dht.sock +# This could be relaxed... +UNIX_MATCH_UID = NO +UNIX_MATCH_GID = NO +# DISABLE_SOCKET_FORWARDING = NO + DEBUG = YES +# USERNAME = +# MAXBUF = +# TIMEOUT = +# DISABLEV6 = +# BINDTO = +# REJECT_FROM = +# REJECT_FROM6 = +# PREFIX = +# DO_FIND_PEER = +# STRICT_KADEMLIA = +# USE_MAX_HOPS = +# MAX_HOPS = +# REPUBLISH = YES +# REPLICATION_FREQUENCY = 60 +# STOP_ON_CLOSEST = +# STOP_FOUND = +# CONVERGE_MODIFIER = + + +[dhtcache] +DATABASE = sqlite +QUOTA = 1 MB + Index: contrib/example-config/arm.conf =================================================================== --- contrib/example-config/arm.conf (revision 0) +++ contrib/example-config/arm.conf (revision 0) @@ -0,0 +1,24 @@ + +[arm] +# PORT = 2087 +HOSTNAME = localhost +HOME = $SERVICEHOME +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-service-arm +ACCEPT_FROM = 127.0.0.1; +ACCEPT_FROM6 = ::1; +DEFAULTSERVICES = topology hostlist dht nse mesh fs +UNIXPATH = /tmp/gnunet-service-arm.sock +UNIX_MATCH_UID = NO +UNIX_MATCH_GID = NO +# GLOBAL_POSTFIX = -l $SERVICEHOME/{}-logs +GLOBAL_POSTFIX = -l $SERVICEHOME/{}-logs -L INFO +# GLOBAL_PREFIX = +# USERNAME = +# MAXBUF = +# TIMEOUT = +# DISABLEV6 = +# BINDTO = +# REJECT_FROM = +# REJECT_FROM6 = +# PREFIX = Index: contrib/example-config/nat.conf =================================================================== --- contrib/example-config/nat.conf (revision 0) +++ contrib/example-config/nat.conf (revision 0) @@ -0,0 +1,54 @@ +[nat] +# Are we behind NAT? +BEHIND_NAT = NO + +# Is the NAT hole-punched? +PUNCHED_NAT = NO + +# Enable UPNP by default? +ENABLE_UPNP = NO + +# Use addresses from the local network interfaces (inluding loopback, but also others) +USE_LOCALADDR = YES + +# Use address obtained from a DNS lookup of our hostname +USE_HOSTNAME = NO + +# External IP address of the NAT box (if known); IPv4 dotted-decimal ONLY at this time (should allow DynDNS!) +# normal interface IP address for non-NATed peers; +# possibly auto-detected (using UPnP) if possible if not specified +# EXTERNAL_ADDRESS = + +# Should we use ICMP-based NAT traversal to try connect to NATed peers +# or, if we are behind NAT, to allow connections to us? +ENABLE_ICMP_CLIENT = NO +ENABLE_ICMP_SERVER = NO + +# IP address of the interface connected to the NAT box; IPv4 dotted-decimal ONLY; +# normal interface IP address for non-NATed peers; +# likely auto-detected (via interface list) if not specified (!) +# INTERNAL_ADDRESS = + +# Disable IPv6 support +DISABLEV6 = NO + +# Do we use addresses from localhost address ranges? (::1, 127.0.0.0/8) +RETURN_LOCAL_ADDRESSES = NO + +# How often do we query the DNS resolver +# for our hostname (to get our own IP), in ms +HOSTNAME_DNS_FREQUENCY = 1200000 + +# How often do we iterate over our +# network interfaces to check for changes +# in our IP address? in ms +IFC_SCAN_FREQUENCY = 3000000 + +# How often do we query the DNS resolver +# for our hostname (to get our own IP), in ms +DYNDNS_FREQUENCY = 140000 + +[gnunet-nat-server] +HOSTNAME = gnunet.org +PORT = 5724 + Index: contrib/example-config/pt.conf =================================================================== --- contrib/example-config/pt.conf (revision 0) +++ contrib/example-config/pt.conf (revision 0) @@ -0,0 +1,13 @@ +[pt] +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-daemon-pt + +# Set this to YES to tunnel IPv4 traffic over GNUnet +TUNNEL_IPV4 = NO + +# Set this to YES to tunnel IPv6 traffic over GNUnet +TUNNEL_IPV6 = NO + +# Set this to YES to tunnel DNS traffic over GNUnet +TUNNEL_DNS = NO + Index: contrib/example-config/lockmanager.conf =================================================================== --- contrib/example-config/lockmanager.conf (revision 0) +++ contrib/example-config/lockmanager.conf (revision 0) @@ -0,0 +1,13 @@ +[lockmanager] +AUTOSTART = YES +# PORT = 2100 +HOSTNAME = localhost +HOME = $SERVICEHOME +CONFIG = $DEFAULTCONFIG +BINARY = gnunet-service-lockmanager +ACCEPT_FROM = 127.0.0.1; +ACCEPT_FROM6 = ::1; +UNIXPATH = /tmp/gnunet-service-lockmanager.sock +UNIX_MATCH_UID = NO +UNIX_MATCH_GID = NO +
_______________________________________________ GNUnet-developers mailing list [email protected] https://lists.gnu.org/mailman/listinfo/gnunet-developers
