Hello all, I recently changed to the GnuPG Smartcard which in general works fine for eMail and for SSH authentication (on Ubuntu 16.10). The only problem I encountered was that when I pull the card from the reader and reinsert it the gpg-agent will not recover.
I have to kill him gpgconf --kill gpg-agent. I checked the logs for gpg-agent, scdaemon and pcscd. The only suspicious I found was this in the pcscd output. #normal operation 00500755 winscard_svc.c:353:ContextThread() Received command: CMD_GET_READERS_STATE from client 14 00500775 winscard_svc.c:353:ContextThread() Received command: CMD_GET_READERS_STATE from client 14 00500746 winscard_svc.c:353:ContextThread() Received command: CMD_GET_READERS_STATE from client 14 00500754 winscard_svc.c:353:ContextThread() Received command: CMD_GET_READERS_STATE from client 14 #remove card 00481042 eventhandler.c:357:EHStatusHandlerThread() Card Removed From OMNIKEY AG 3121 USB 00 00 00019695 winscard_svc.c:353:ContextThread() Received command: CMD_GET_READERS_STATE from client 14 #insert card 03660811 ifdhandler.c:1146:IFDHPowerICC() action: PowerUp, usb:076b/3022:libudev:0:/dev/bus/usb/001/008 (lun: 0) 0032199 eventhandler.c:405:EHStatusHandlerThread() powerState: POWER_STATE_POWERED 00000025 eventhandler.c:422:EHStatusHandlerThread() Card inserted into OMNIKEY AG 3121 USB 00 00 00000013 Card ATR: 3B DA 18 FF 81 B1 FE 75 1F 03 00 31 C5 73 C0 01 40 00 90 00 0C #query card 02063947 winscard_msg_srv.c:253:ProcessEventsServer() Common channel packet arrival 00000025 winscard_msg_srv.c:265:ProcessEventsServer() ProcessCommonChannelRequest detects: 15 00000007 pcscdaemon.c:134:SVCServiceRunLoop() A new context thread creation is requested: 15 00000093 winscard_svc.c:331:ContextThread() Authorized PC/SC client 00000018 winscard_svc.c:335:ContextThread() Thread is started: dwClientID=15, threadContext @0x9d5560 00000019 winscard_svc.c:353:ContextThread() Received command: CMD_VERSION from client 15 00000009 winscard_svc.c:365:ContextThread() Client is protocol version 4:3 00000006 winscard_svc.c:385:ContextThread() CMD_VERSION rv=0x0 for client 15 00000083 winscard_svc.c:353:ContextThread() Received command: ESTABLISH_CONTEXT from client 15 00000014 winscard.c:215:SCardEstablishContext() Establishing Context: 0x5FFCC3AF 00000005 winscard_svc.c:446:ContextThread() ESTABLISH_CONTEXT rv=0x0 for client 15 00000059 winscard_svc.c:353:ContextThread() Received command: CMD_GET_READERS_STATE from client 15 00000037 winscard_svc.c:353:ContextThread() Received command: CMD_GET_READERS_STATE from client 15 00000269 winscard_svc.c:353:ContextThread() Received command: CONNECT from client 15 00000035 winscard_svc.c:484:ContextThread() Authorized client for 'OMNIKEY AG 3121 USB 00 00' 00000006 winscard.c:257:SCardConnect() Attempting Connect to OMNIKEY AG 3121 USB 00 00 using protocol: 3 00000006 readerfactory.c:768:RFReaderInfo() RefReader() count was: 1 # Suspicious ? 00000005 winscard.c:284:SCardConnect() Error Reader Exclusive 00000004 winscard.c:512:SCardConnect() UnrefReader() count was: 2 00000006 winscard_svc.c:498:ContextThread() CONNECT rv=0x8010000B for client 15 02935987 ifdhandler.c:1146:IFDHPowerICC() action: PowerDown, usb:076b/3022:libudev:0:/dev/bus/usb/001/008 (lun: 0) 00000474 eventhandler.c:481:EHStatusHandlerThread() powerState: POWER_STATE_UNPOWERED I can not figure out what is the problem. Neiter I found anything in the documentation / google . Is this common ? Does anyone have an ideas where this problem comes from ? Maybe it is just that I'm doing something wrong. Happy to provide more information if needed. thanks and best regards Dirk _______________________________________________ Gnupg-users mailing list Gnupg-users@gnupg.org http://lists.gnupg.org/mailman/listinfo/gnupg-users