Windows, GPG 2.22.2 from chocolatey (choco install gnupg) While trying to setup gpg-agent to work with SSH key on Yubikey on Windows I have noticed (perhaps unrelated) issue:
PS C:\Users\avemilia> gpgconf.exe --kill all PS C:\Users\avemilia> gpgconf.exe --launch all PS C:\Users\avemilia> echo "scd getinfo reader_list" | gpg-connect-agent.exe --decode ERR 100663354 No data <SCD> PS C:\Users\avemilia> gpgconf.exe --kill all On Linux this gives: ❯ echo "scd getinfo reader_list" | gpg-connect-agent --decode D 1050:0407:X:0 OK I found two mentions of this issue [0][1]. It seems like this issue was addressed in 2.3.0? Why do I care? I am configuring gpg and ssh on Windows and was reading [2] which mentions this command to determine reader-port value in order to operate only on one smartcard. I am struggling to understand what this error means -- gpg cannot determine the smartcard to use? If so, why does gpg --card-status work? If not, what does the error imply? Can it be one of the reasons why agent forwarding over ssh fails (this is what I was debugging before I met this error)? gpg-agent.conf: enable-ssh-support enable-putty-support default-cache-ttl 60 max-cache-ttl 120 verbose debug-level advanced log-file C:\Users\avemilia\AppData\Roaming\gnupg\gpg-agent.log scdaemon.conf: #reader-port Yubico Yubikey 4 OTP+U2F+CCID 0 card-timeout 5 verbose debug-level advanced log-file C:\Users\avemilia\AppData\Roaming\gnupg\scdaemon.log Notice that reader-port is commented out, but it the error is the same when it is set as well. I have looked up this value from Device Manager according to some guide on the internet that recommended setting reader-port so that scdaemon doesn't choke on virtual smartcards generated by 365 Office, or something. Below are the logs of gpg-agent and scdaemon based on (only) 4 commands provided at the beginning of this email. agent: 2020-08-31 22:59:54 gpg-agent[7220] listening on socket 'C:\Users\avemilia\AppData\Roaming\gnupg\S.gpg-agent' 2020-08-31 22:59:54 gpg-agent[7220] listening on socket 'C:\Users\avemilia\AppData\Roaming\gnupg\S.gpg-agent.extra' 2020-08-31 22:59:54 gpg-agent[7220] listening on socket 'C:\Users\avemilia\AppData\Roaming\gnupg\S.gpg-agent.browser' 2020-08-31 22:59:54 gpg-agent[7220] listening on socket 'C:\Users\avemilia\AppData\Roaming\gnupg\S.gpg-agent.ssh' 2020-08-31 22:59:54 gpg-agent[7220] gpg-agent (GnuPG) 2.2.22 started 2020-08-31 22:59:54 gpg-agent[7220] putty message loop thread started 2020-08-31 22:59:54 gpg-agent[7220] DBG: chan_0x000002a8 -> OK Pleased to meet you 2020-08-31 22:59:54 gpg-agent[7220] DBG: chan_0x000002a8 <- RESET 2020-08-31 22:59:54 gpg-agent[7220] DBG: chan_0x000002a8 -> OK 2020-08-31 22:59:54 gpg-agent[7220] DBG: chan_0x000002a8 <- NOP 2020-08-31 22:59:54 gpg-agent[7220] DBG: chan_0x000002a8 -> OK 2020-08-31 22:59:54 gpg-agent[7220] DBG: chan_0x000002a8 <- [eof] 2020-08-31 23:00:06 gpg-agent[7220] DBG: chan_0x000002b8 -> OK Pleased to meet you 2020-08-31 23:00:06 gpg-agent[7220] DBG: chan_0x000002b8 <- RESET 2020-08-31 23:00:06 gpg-agent[7220] DBG: chan_0x000002b8 -> OK 2020-08-31 23:00:06 gpg-agent[7220] DBG: chan_0x000002b8 <- scd getinfo reader_list 2020-08-31 23:00:06 gpg-agent[7220] no running SCdaemon - starting it 2020-08-31 23:00:06 gpg-agent[7220] DBG: chan_0x000002cc <- OK GNU Privacy Guard's Smartcard server ready 2020-08-31 23:00:06 gpg-agent[7220] DBG: first connection to SCdaemon established 2020-08-31 23:00:06 gpg-agent[7220] DBG: chan_0x000002cc -> GETINFO socket_name 2020-08-31 23:00:06 gpg-agent[7220] DBG: chan_0x000002cc <- D C:\Users\avemilia\AppData\Roaming\gnupg\S.scdaemon 2020-08-31 23:00:06 gpg-agent[7220] DBG: chan_0x000002cc <- OK 2020-08-31 23:00:06 gpg-agent[7220] DBG: additional connections at 'C:\Users\avemilia\AppData\Roaming\gnupg\S.scdaemon' 2020-08-31 23:00:06 gpg-agent[7220] DBG: chan_0x000002cc -> OPTION event-signal=0x000002a4 2020-08-31 23:00:06 gpg-agent[7220] DBG: chan_0x000002cc <- OK 2020-08-31 23:00:06 gpg-agent[7220] DBG: chan_0x000002cc -> getinfo reader_list 2020-08-31 23:00:06 gpg-agent[7220] DBG: chan_0x000002cc <- ERR 100663354 No data <SCD> 2020-08-31 23:00:06 gpg-agent[7220] DBG: chan_0x000002b8 -> ERR 100663354 No data <SCD> 2020-08-31 23:00:06 gpg-agent[7220] DBG: chan_0x000002b8 <- [eof] 2020-08-31 23:00:06 gpg-agent[7220] DBG: chan_0x000002cc -> RESTART 2020-08-31 23:00:06 gpg-agent[7220] DBG: chan_0x000002cc <- OK 2020-08-31 23:00:09 gpg-agent[7220] DBG: chan_0x000000b0 -> OK Pleased to meet you 2020-08-31 23:00:09 gpg-agent[7220] DBG: chan_0x000000b0 <- RESET 2020-08-31 23:00:09 gpg-agent[7220] DBG: chan_0x000000b0 -> OK 2020-08-31 23:00:09 gpg-agent[7220] DBG: chan_0x000000b0 <- GETINFO scd_running 2020-08-31 23:00:09 gpg-agent[7220] DBG: chan_0x000000b0 -> OK 2020-08-31 23:00:09 gpg-agent[7220] DBG: chan_0x000000b0 <- scd killscd 2020-08-31 23:00:09 gpg-agent[7220] new connection to SCdaemon established (reusing) 2020-08-31 23:00:09 gpg-agent[7220] DBG: chan_0x000002cc -> killscd 2020-08-31 23:00:09 gpg-agent[7220] DBG: chan_0x000002cc <- OK closing connection 2020-08-31 23:00:09 gpg-agent[7220] DBG: chan_0x000000b0 -> OK 2020-08-31 23:00:09 gpg-agent[7220] DBG: chan_0x000000b0 <- [eof] 2020-08-31 23:00:09 gpg-agent[7220] DBG: chan_0x000002cc -> RESTART 2020-08-31 23:00:09 gpg-agent[7220] DBG: chan_0x000002cc <- [eof] 2020-08-31 23:00:09 gpg-agent[7220] DBG: chan_0x000002d4 -> OK Pleased to meet you 2020-08-31 23:00:09 gpg-agent[7220] DBG: chan_0x000002d4 <- RESET 2020-08-31 23:00:09 gpg-agent[7220] DBG: chan_0x000002d4 -> OK 2020-08-31 23:00:09 gpg-agent[7220] DBG: chan_0x000002d4 <- KILLAGENT 2020-08-31 23:00:09 gpg-agent[7220] DBG: chan_0x000002d4 -> OK closing connection 2020-08-31 23:00:09 gpg-agent[7220] secmem usage: 0/32768 bytes in 0 blocks scd: 2020-08-31 23:00:06 scdaemon[12216] listening on socket 'C:\Users\avemilia\AppData\Roaming\gnupg\S.scdaemon' 2020-08-31 23:00:06 scdaemon[12216] handler for fd -1 started 2020-08-31 23:00:06 scdaemon[12216] DBG: chan_0x00000100 -> OK GNU Privacy Guard's Smartcard server ready 2020-08-31 23:00:06 scdaemon[12216] DBG: chan_0x00000100 <- GETINFO socket_name 2020-08-31 23:00:06 scdaemon[12216] DBG: chan_0x00000100 -> D C:\Users\avemilia\AppData\Roaming\gnupg\S.scdaemon 2020-08-31 23:00:06 scdaemon[12216] DBG: chan_0x00000100 -> OK 2020-08-31 23:00:06 scdaemon[12216] DBG: chan_0x00000100 <- OPTION event-signal=0x000002a4 2020-08-31 23:00:06 scdaemon[12216] DBG: chan_0x00000100 -> OK 2020-08-31 23:00:06 scdaemon[12216] DBG: chan_0x00000100 <- getinfo reader_list 2020-08-31 23:00:06 scdaemon[12216] DBG: chan_0x00000100 -> ERR 100663354 No data <SCD> 2020-08-31 23:00:06 scdaemon[12216] DBG: chan_0x00000100 <- RESTART 2020-08-31 23:00:06 scdaemon[12216] DBG: chan_0x00000100 -> OK 2020-08-31 23:00:09 scdaemon[12216] DBG: chan_0x00000100 <- killscd 2020-08-31 23:00:09 scdaemon[12216] DBG: chan_0x00000100 -> OK closing connection Thank you in advance for the reply (and replies on my previous thread, on which I replied with own solution). [0] <https://dev.gnupg.org/T4620> [1] <https://dev.gnupg.org/T1081> [2] <https://www.gnupg.org/documentation/manuals/gnupg/Scdaemon-Options.html> _______________________________________________ Gnupg-users mailing list Gnupg-users@gnupg.org http://lists.gnupg.org/mailman/listinfo/gnupg-users
