Hi All,
I understand this issue has been discussed in the past, and I have seen a
few comments from Ian and Russ Cox about this topic, but I could not arrive
at a conclusion about how I can make the time.Ticker send me ticks at
atleast close to the Ticker duration I specify. At the moment, I am seeing
ticks being sent at way over the specified duration especially when I have
sub-millisecond durations.
With 1ms duration, the ticker seems to be quite close to the duration
(maybe within +/-5%). I would be happier if it were within 1%, but I can
handle that.
With 1 micro-second duration, the ticker sends ticks nearly 4 times slower
than expected.
Here is my sample code
"
ti := time.NewTicker(1 * time.Millisecond)
start := time.Now()
for i := 0; i < 1000; i++ {
<-ti.C
}
fmt.Printf("elapsed time = %v\n", time.Since(start))
"
The output is usually close to 1 second as expected (close to) when using
1ms duration.
elapsed time = 1.000159338s
But when I change the Ticker duration to 1 micro-second, I get the
following output which shows the elapsed time close to 4 seconds:
elapsed time = 4.796662856s
*Is there anyway, I can ensure ticks are sent at approximately within 5% of
my specified duration ?*
I understand from time.Ticker docs that ticks will be lost if the ticker
handler cannot keep up with the ticker time.
In the simple code above, I am literally doing very minimal work in each
loop iteration and that is about checking the loop condition.
So I am not sure why ticks are being lost ?
--
You received this message because you are subscribed to the Google Groups
"golang-nuts" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to golang-nuts+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/golang-nuts/7aaa580e-cdcc-4217-adb3-f86ffa752160n%40googlegroups.com.
