I'm glad that fixed the issue! On Thursday, June 4, 2015 at 12:52:31 PM UTC-4, Julien wrote: > > Thanks a lot for the help Ryan. > Even though it is supposed to be an optional configuration, I had to do > the following to fix the problem (from > http://docs.docker.com/installation/ubuntulinux/): > > To create the docker group and add your user: > > 1. > > Log into Ubuntu as a user with sudo privileges. > > This procedure assumes you log in as the ubuntu user. > 2. > > Create the docker group and add your user. > > $ sudo usermod -aG docker ubuntu > > 3. > > Log out and log back in. > > This ensures your user is running with the correct permissions. > 4. > > Verify your work by running docker without sudo. > > $ docker run hello-world > > > > On Tuesday, June 2, 2015 at 4:35:10 PM UTC+2, Ryan (Cloud Platform > Support) wrote: >> >> Looks like most of the issues have been resolved. I took away that the >> error messages should be clearer. Please star this PIT >> <https://code.google.com/p/googleappengine/issues/detail?id=12013&thanks=12013&ts=1433255342> >> >> to add your voice to the thread. >> >> On Tuesday, June 2, 2015 at 9:25:07 AM UTC-4, Danny Leshem wrote: >>> >>> Apparently the issue (at least in our case) was that billing was not >>> enabled for the GCP project. >>> >>> Our bad! (though it would be helpful if the error message was more >>> informative) >>> >>> On Monday, June 1, 2015 at 10:12:55 PM UTC+3, Ryan (Cloud Platform >>> Support) wrote: >>>> >>>> @*Julien You need to setup your environment variables. You need to set >>>> all 3 for it to work. Here are some links:* >>>> >>>> *https://groups.google.com/forum/#!topic/google-appengine-stackoverflow/mz1ugDxKZPU >>>> >>>> <https://groups.google.com/forum/#!topic/google-appengine-stackoverflow/mz1ugDxKZPU>* >>>> *http://stackoverflow.com/questions/26842682/dockerdaemonconnectionerror-when-setting-google-cloud-managed-vm-in-ubuntu >>>> >>>> <http://stackoverflow.com/questions/26842682/dockerdaemonconnectionerror-when-setting-google-cloud-managed-vm-in-ubuntu>* >>>> *http://stackoverflow.com/questions/27118022/how-to-use-gcloud-preview-app-run-without-boot2docker >>>> >>>> <http://stackoverflow.com/questions/27118022/how-to-use-gcloud-preview-app-run-without-boot2docker>* >>>> >>>> >>>> On Monday, June 1, 2015 at 8:05:04 AM UTC-4, Julien wrote: >>>>> >>>>> *Last week I was getting the following:* >>>>> gcloud preview app deploy app.yaml --set-default >>>>> You are about to deploy the following modules: >>>>> - academic-torch-95915/default/20150529t102149 From: >>>>> [/home/julien/1-hello-world/app.yaml] >>>>> Do you want to continue (Y/n)? y >>>>> >>>>> ERROR: (gcloud.preview.app.deploy) Server responded with code [400]: >>>>> Bad Request Unexpected HTTP status 400 >>>>> >>>>> >>>>> *But since today I am getting this:* >>>>> gcloud --verbosity debug preview app deploy app.yaml --set-default >>>>> DEBUG: Running gcloud.preview.app.deploy with >>>>> Namespace(__calliope_internal_deepest_parser=ArgumentParser(prog='gcloud.preview.app.deploy', >>>>> >>>>> usage=None, description="*(BETA)* This command is used to deploy both >>>>> code >>>>> and configuration to the App Engine\nserver. As an input it takes one or >>>>> more ``DEPLOYABLES'' that should be\nuploaded. A ``DEPLOYABLE'' can be a >>>>> module's .yaml file or a configuration's\n.yaml file.", version=None, >>>>> formatter_class=<class 'argparse.HelpFormatter'>, >>>>> conflict_handler='error', >>>>> add_help=False), cmd_func=<bound method Command.Run of >>>>> <googlecloudsdk.calliope.backend.Command object at 0x7fcce2105d90>>, >>>>> command_path=['gcloud', 'preview', 'app', 'deploy'], >>>>> deployables=['app.yaml'], document=None, env_vars=None, force=False, >>>>> format=None, h=None, help=None, http_timeout=None, log_http=None, >>>>> markdown=None, project=None, quiet=None, remote=False, server=None, >>>>> set_default=True, trace_token=None, user_output_enabled=None, >>>>> verbosity='debug', version=None). >>>>> You are about to deploy the following modules: >>>>> - academic-torch-95915/default/20150601t140217 From: >>>>> [/home/julien/1-hello-world/app.yaml] >>>>> Do you want to continue (Y/n)? Y >>>>> >>>>> DEBUG: Host: appengine.google.com >>>>> DEBUG: _Authenticate configuring auth; needs_auth=False >>>>> DEBUG: Sending request to >>>>> https://appengine.google.com/api/vms/prepare?app_id=academic-torch-95915 >>>>> headers={'X-appcfg-api-version': '1', 'content-length': '0', >>>>> 'Content-Type': 'application/octet-stream'} body= >>>>> INFO: Attempting refresh to obtain initial access_token >>>>> INFO: Refreshing access_token >>>>> DEBUG: Got response: {bucket: >>>>> vm-containers.academic-torch-95915.appspot.com, path: /containers} >>>>> >>>>> INFO: Refreshing access_token >>>>> DEBUG: Detected docker environment variables: DOCKER_HOST=None, >>>>> DOCKER_CERT_PATH=None, DOCKER_TLS_VERIFY=None >>>>> WARNING: Found a stale /var/run/docker.sock, did you forget to start >>>>> your docker daemon? >>>>> DEBUG: (gcloud.preview.app.deploy) Couldn't connect to the docker >>>>> daemon. >>>>> Please check if the environment variables DOCKER_HOST, >>>>> DOCKER_CERT_PATH and DOCKER_TLS_VERIFY are set correctly. If you are >>>>> using >>>>> boot2docker, you can set them up by executing the commands that are shown >>>>> by: >>>>> boot2docker shellinit >>>>> Traceback (most recent call last): >>>>> File >>>>> "/home/julien/Documents/tasks/googleCloud/google-cloud-sdk/./lib/googlecloudsdk/calliope/cli.py", >>>>> >>>>> line 537, in Execute >>>>> result = args.cmd_func(cli=self, args=args) >>>>> File >>>>> "/home/julien/Documents/tasks/googleCloud/google-cloud-sdk/./lib/googlecloudsdk/calliope/backend.py", >>>>> >>>>> line 1089, in Run >>>>> result = command_instance.Run(args) >>>>> File >>>>> "/home/julien/Documents/tasks/googleCloud/google-cloud-sdk/lib/googlecloudsdk/appengine/app_commands/deploy.py", >>>>> >>>>> line 115, in Run >>>>> timeout=config.DOCKER_D_REQUEST_TIMEOUT) >>>>> File >>>>> "/home/julien/Documents/tasks/googleCloud/google-cloud-sdk/./lib/googlecloudsdk/appengine/lib/docker/containers.py", >>>>> >>>>> line 282, in NewDockerClient >>>>> client = NewDockerClientNoCheck(**kwargs) >>>>> File >>>>> "/home/julien/Documents/tasks/googleCloud/google-cloud-sdk/./lib/googlecloudsdk/appengine/lib/docker/containers.py", >>>>> >>>>> line 265, in NewDockerClientNoCheck >>>>> raise DockerDaemonConnectionError(DOCKER_CONNECTION_ERROR) >>>>> DockerDaemonConnectionError: Couldn't connect to the docker daemon. >>>>> Please check if the environment variables DOCKER_HOST, >>>>> DOCKER_CERT_PATH and DOCKER_TLS_VERIFY are set correctly. If you are >>>>> using >>>>> boot2docker, you can set them up by executing the commands that are shown >>>>> by: >>>>> boot2docker shellinit >>>>> ERROR: (gcloud.preview.app.deploy) Couldn't connect to the docker >>>>> daemon. >>>>> Please check if the environment variables DOCKER_HOST, >>>>> DOCKER_CERT_PATH and DOCKER_TLS_VERIFY are set correctly. If you are >>>>> using >>>>> boot2docker, you can set them up by executing the commands that are shown >>>>> by: >>>>> boot2docker shellinit >>>>> >>>>> On Sunday, May 31, 2015 at 1:32:02 PM UTC+2, Danny Leshem wrote: >>>>>> >>>>>> Hi Ryan, >>>>>> I have the same issue. >>>>>> >>>>>> I followed the instruction for a Node.JS managed VM and trying to >>>>>> deploy your 1-hello-world example to a new (never deployed) project >>>>>> called >>>>>> "zipcodes-prod" (the project shows the US location). >>>>>> >>>>>> Here's what happens in Cygwin, but I also tried in the Google Cloud >>>>>> SDK Shell in Windows, and in a different computer that runs Mac OS. >>>>>> >>>>>> The command I'm running: >>>>>> gcloud --verbosity debug preview app deploy app.yaml --set-default >>>>>> >>>>>> Output: >>>>>> DEBUG: Running gcloud.preview.app.deploy with >>>>>> Namespace(__calliope_internal_deepest_parser=ArgumentParser(prog='gcloud.preview.app.deploy', >>>>>> >>>>>> usage=None, description="*(BETA)* This command is used to deploy both >>>>>> code >>>>>> and configuration to the App Engine\nserver. As an input it takes one >>>>>> or >>>>>> more ``DEPLOYABLES'' that should be\nuploaded. A ``DEPLOYABLE'' can be >>>>>> a >>>>>> module's .yaml file or a configuration's\n.yaml file.", version=None, >>>>>> formatter_class=<class 'argparse.HelpFormatter'>, >>>>>> conflict_handler='error', >>>>>> add_help=False), cmd_func=<bound method Command.Run of >>>>>> <googlecloudsdk.calliope.backend.Command object at 0xff3d444c>>, >>>>>> command_path=['gcloud', 'preview', 'app', 'deploy'], >>>>>> deployables=['app.yaml'], document=None, env_vars=None, force=False, >>>>>> format=None, h=None, help=None, http_timeout=None, log_http=None, >>>>>> markdown=None, project=None, quiet=None, remote=False, server=None, >>>>>> set_default=True, trace_token=None, user_output_enabled=None, >>>>>> verbosity='debug', version=None). >>>>>> INFO: Refreshing access_token >>>>>> You are about to deploy the following modules: >>>>>> - zipcodes-prod/default/20150531t142537 From: >>>>>> [/cygdrive/c/Projects/zipcodes/nodejs-getting-started.git/app.yaml] >>>>>> Do you want to continue (Y/n)? Y >>>>>> >>>>>> DEBUG: Host: appengine.google.com >>>>>> DEBUG: _Authenticate configuring auth; needs_auth=False >>>>>> DEBUG: Sending request to >>>>>> https://appengine.google.com/api/vms/prepare?app_id=zipcodes-prod >>>>>> headers={'X-appcfg-api-version': '1', 'content-length': '0', >>>>>> 'Content-Type': 'application/octet-stream'} body= >>>>>> INFO: Attempting refresh to obtain initial access_token >>>>>> INFO: Refreshing access_token >>>>>> DEBUG: Got http error 400. >>>>>> DEBUG: Unexpected results: {'status': '400', 'alternate-protocol': >>>>>> '443:quic,p=1', 'content-length': '75', 'expires': 'Fri, 01 Jan 1990 >>>>>> 00:00:00 GMT', 'server': 'Google Frontend', 'cache-control': 'no-cache', >>>>>> 'date': 'Sun, 31 May 2015 11:25:53 GMT', 'content-type': 'text/plain'} >>>>>> DEBUG: (gcloud.preview.app.deploy) Server responded with code [400]: >>>>>> Bad Request Unexpected HTTP status 400 >>>>>> Traceback (most recent call last): >>>>>> File >>>>>> "/home/dannyl/google-cloud-sdk/./lib/googlecloudsdk/calliope/cli.py", >>>>>> line >>>>>> 537, in Execute >>>>>> result = args.cmd_func(cli=self, args=args) >>>>>> File >>>>>> "/home/dannyl/google-cloud-sdk/./lib/googlecloudsdk/calliope/backend.py", >>>>>> >>>>>> line 1089, in Run >>>>>> result = command_instance.Run(args) >>>>>> File >>>>>> "/home/dannyl/google-cloud-sdk/lib/googlecloudsdk/appengine/app_commands/deploy.py", >>>>>> >>>>>> line 111, in Run >>>>>> client.PrepareVmRuntime() >>>>>> File >>>>>> "/home/dannyl/google-cloud-sdk/./lib/googlecloudsdk/appengine/lib/appengine_client.py", >>>>>> >>>>>> line 281, in PrepareVmRuntime >>>>>> rpcserver.Send('/api/vms/prepare', app_id=self.project) >>>>>> File >>>>>> "/home/dannyl/google-cloud-sdk/./lib/googlecloudsdk/appengine/lib/util.py", >>>>>> >>>>>> line 347, in Send >>>>>> response = self._server.Send(*args, **kwargs) >>>>>> File >>>>>> "/home/dannyl/google-cloud-sdk/./lib/googlecloudsdk/appengine/lib/external/tools/appengine_rpc_httplib2.py", >>>>>> >>>>>> line 269, in Send >>>>>> 'Unexpected HTTP status %s' % status) >>>>>> File >>>>>> "/home/dannyl/google-cloud-sdk/./lib/googlecloudsdk/appengine/lib/external/tools/appengine_rpc_httplib2.py", >>>>>> >>>>>> line 67, in RaiseHttpError >>>>>> raise urllib2.HTTPError(url, response_info.status, msg, >>>>>> response_info, stream) >>>>>> RPCError: Server responded with code [400]: >>>>>> Bad Request Unexpected HTTP status 400 >>>>>> ERROR: (gcloud.preview.app.deploy) Server responded with code [400]: >>>>>> Bad Request Unexpected HTTP status 400 >>>>>> >>>>>> I'm using my Wix.com account, which is a Google Cloud Premier >>>>>> Account. Let me know if you need further information. >>>>>> >>>>>> Best, >>>>>> Danny >>>>>> >>>>>> On Friday, May 29, 2015 at 8:30:55 PM UTC+3, Ryan (Cloud Platform >>>>>> Support) wrote: >>>>>>> >>>>>>> That shows me you are in a US project. Can you the command and error >>>>>>> you see? >>>>>>> >>>>>>> On Friday, May 29, 2015 at 12:53:47 PM UTC-4, Julien wrote: >>>>>>>> >>>>>>>> There is no location field.. (see attachment) >>>>>>>> >>>>>>>> On Friday, May 29, 2015 at 6:22:58 PM UTC+2, Ryan (Cloud Platform >>>>>>>> Support) wrote: >>>>>>>>> >>>>>>>>> Go to the original console <https://appengine.google.com/> and >>>>>>>>> look at the location field. >>>>>>>>> >>>>>>>>> On Friday, May 29, 2015 at 12:08:54 PM UTC-4, Julien wrote: >>>>>>>>>> >>>>>>>>>> I haven't selected it when I created the project so it should be >>>>>>>>>> which ever data center is the default one (US, I assume). Is there a >>>>>>>>>> place >>>>>>>>>> where I can check it? >>>>>>>>>> >>>>>>>>>> On Friday, May 29, 2015 at 3:04:13 PM UTC+2, Ryan (Cloud Platform >>>>>>>>>> Support) wrote: >>>>>>>>>>> >>>>>>>>>>> @Julien Is your project in US or EU? >>>>>>>>>>> >>>>>>>>>>> On Friday, May 29, 2015 at 3:14:18 AM UTC-4, Julien wrote: >>>>>>>>>>>> >>>>>>>>>>>> I am having the exact same problem from South Africa. >>>>>>>>>>>> >>>>>>>>>>>> On Wednesday, May 27, 2015 at 3:23:41 PM UTC+2, Ryan (Cloud >>>>>>>>>>>> Platform Support) wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> Where in the world the project was created is irrelevant, it's >>>>>>>>>>>>> what 'Location' setting was used when you created the project. Go >>>>>>>>>>>>> to the original >>>>>>>>>>>>> console <https://appengine.google.com/> and check the >>>>>>>>>>>>> 'Location' flag. If it says US then you should be able to deploy. >>>>>>>>>>>>> If it >>>>>>>>>>>>> says EU you need to create a new project. Let me know if you have >>>>>>>>>>>>> any >>>>>>>>>>>>> issues finding the US/EU flag or still can;t deploy in a US >>>>>>>>>>>>> project. >>>>>>>>>>>>> >>>>>>>>>>>>> On Wednesday, May 27, 2015 at 5:27:31 AM UTC-4, James >>>>>>>>>>>>> Mortensen wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> I hate that Google Groups has no editing capabilities. I >>>>>>>>>>>>>> should say that I'm from the United States, since globally >>>>>>>>>>>>>> America is also >>>>>>>>>>>>>> the name of a few different continents and not necessarily >>>>>>>>>>>>>> specific to the >>>>>>>>>>>>>> United States of America, of which I am from. Hope this helps >>>>>>>>>>>>>> clarify and >>>>>>>>>>>>>> eliminate any ethnocentrism on my part. >>>>>>>>>>>>>> >>>>>>>>>>>>>> James >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Wednesday, May 27, 2015 at 2:56:00 PM UTC+5:30, James >>>>>>>>>>>>>> Mortensen wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I am an American, but I created my test project in India. >>>>>>>>>>>>>>> Does that matter? One of my colleagues created one in the USA >>>>>>>>>>>>>>> and he >>>>>>>>>>>>>>> didn't have any problem. How do we get around this if this is >>>>>>>>>>>>>>> indeed the >>>>>>>>>>>>>>> issue? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>> James >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Tuesday, May 26, 2015 at 11:22:28 PM UTC+5:30, Ryan >>>>>>>>>>>>>>> (Cloud Platform Support) wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I'm asking this because Managed VM's are currently only >>>>>>>>>>>>>>>> available in US projects >>>>>>>>>>>>>>>> <https://cloud.google.com/appengine/docs/location>, so I'm >>>>>>>>>>>>>>>> trying to see if there is another issue happening here. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Tuesday, May 26, 2015 at 1:23:01 PM UTC-4, Ryan (Cloud >>>>>>>>>>>>>>>> Platform Support) wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> That means you never got a MVM up and running thats all. >>>>>>>>>>>>>>>>> Is everyone seeing this problem have EU projects? I am trying >>>>>>>>>>>>>>>>> to reproduce >>>>>>>>>>>>>>>>> without luck so far following the instructions. I will >>>>>>>>>>>>>>>>> continue to look >>>>>>>>>>>>>>>>> into it. If you can confirm that your projects are in the EU >>>>>>>>>>>>>>>>> it will help. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Tuesday, May 26, 2015 at 12:53:26 PM UTC-4, James >>>>>>>>>>>>>>>>> Hutton wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Hi Ryan, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I have never deployed anything to Google successfully. >>>>>>>>>>>>>>>>>> I'm a Google Cloud noob. What I and everyone else on this >>>>>>>>>>>>>>>>>> thread is trying >>>>>>>>>>>>>>>>>> to do is to follow Google's "Hello world" Node JS tutorial >>>>>>>>>>>>>>>>>> here: >>>>>>>>>>>>>>>>>> https://cloud.google.com/nodejs/getting-started/hello-world >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> The problem is that if you follow the instructions in the >>>>>>>>>>>>>>>>>> tutorial, then you get an error message when you try to >>>>>>>>>>>>>>>>>> deploy. Given that >>>>>>>>>>>>>>>>>> several people are having this problem, it looks like the >>>>>>>>>>>>>>>>>> instructions in >>>>>>>>>>>>>>>>>> the tutorial might be wrong. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I clicked on your link and it started prompting me to >>>>>>>>>>>>>>>>>> create a VM. I don't know whether that's a good or a bad >>>>>>>>>>>>>>>>>> thing. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Tuesday, 26 May 2015 17:35:06 UTC+1, Ryan (Cloud >>>>>>>>>>>>>>>>>> Platform Support) wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> If you have deployed it before without issue you can go >>>>>>>>>>>>>>>>>>> here >>>>>>>>>>>>>>>>>>> <https://console.developers.google.com/project/_/compute/instances?graph=GCE_CPU> >>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>> see what zone. If you have not then I need you to confirm >>>>>>>>>>>>>>>>>>> you are deploying >>>>>>>>>>>>>>>>>>> the Node.js and the command line you used to deploy it. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Tuesday, May 26, 2015 at 12:28:04 PM UTC-4, James >>>>>>>>>>>>>>>>>>> Hutton wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I think it is the EU Data Center. But I can't remember >>>>>>>>>>>>>>>>>>>> for sure. How can I find out? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Tuesday, 26 May 2015 16:18:15 UTC+1, Ryan (Cloud >>>>>>>>>>>>>>>>>>>> Platform Support) wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Where is the instance located? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Tuesday, May 26, 2015 at 10:57:29 AM UTC-4, James >>>>>>>>>>>>>>>>>>>>> Hutton wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Hi Ryan >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I too have been getting this error. Here is the >>>>>>>>>>>>>>>>>>>>>> output from the "--verbosity debug" option, per your >>>>>>>>>>>>>>>>>>>>>> request. I have >>>>>>>>>>>>>>>>>>>>>> replaced my app ID on the 3rd line with "XXXXX" but it >>>>>>>>>>>>>>>>>>>>>> is otherwise >>>>>>>>>>>>>>>>>>>>>> verbatim. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> DEBUG: Host: appengine.google.com >>>>>>>>>>>>>>>>>>>>>> DEBUG: _Authenticate configuring auth; >>>>>>>>>>>>>>>>>>>>>> needs_auth=False >>>>>>>>>>>>>>>>>>>>>> DEBUG: Sending request to >>>>>>>>>>>>>>>>>>>>>> https://appengine.google.com/api/vms/prepare?app_id=XXXXXXXXXXX >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> headers={'X-appcfg-api-version': '1', 'content-length': >>>>>>>>>>>>>>>>>>>>>> '0', >>>>>>>>>>>>>>>>>>>>>> 'Content-Type': 'application/octet-stream'} body= >>>>>>>>>>>>>>>>>>>>>> INFO: Attempting refresh to obtain initial >>>>>>>>>>>>>>>>>>>>>> access_token >>>>>>>>>>>>>>>>>>>>>> INFO: Refreshing access_token >>>>>>>>>>>>>>>>>>>>>> DEBUG: Got http error 400. >>>>>>>>>>>>>>>>>>>>>> DEBUG: Unexpected results: {'status': '400', >>>>>>>>>>>>>>>>>>>>>> 'alternate-protocol': '443:quic,p=1', 'content-length': >>>>>>>>>>>>>>>>>>>>>> '82', 'expires': >>>>>>>>>>>>>>>>>>>>>> 'Fri, 01 Jan 1990 00:00:00 GMT', 'server': 'Google >>>>>>>>>>>>>>>>>>>>>> Frontend', >>>>>>>>>>>>>>>>>>>>>> 'cache-control': 'no-cache', 'date': 'Tue, 26 May 2015 >>>>>>>>>>>>>>>>>>>>>> 14:49:35 GMT', >>>>>>>>>>>>>>>>>>>>>> 'content-type': 'text/plain'} >>>>>>>>>>>>>>>>>>>>>> DEBUG: (gcloud.preview.app.deploy) Server responded >>>>>>>>>>>>>>>>>>>>>> with code [400]: >>>>>>>>>>>>>>>>>>>>>> Bad Request Unexpected HTTP status 400 >>>>>>>>>>>>>>>>>>>>>> Traceback (most recent call last): >>>>>>>>>>>>>>>>>>>>>> File >>>>>>>>>>>>>>>>>>>>>> "/home/james/google-cloud-sdk/./lib/googlecloudsdk/calliope/cli.py", >>>>>>>>>>>>>>>>>>>>>> line >>>>>>>>>>>>>>>>>>>>>> 537, in Execute >>>>>>>>>>>>>>>>>>>>>> result = args.cmd_func(cli=self, args=args) >>>>>>>>>>>>>>>>>>>>>> File >>>>>>>>>>>>>>>>>>>>>> "/home/james/google-cloud-sdk/./lib/googlecloudsdk/calliope/backend.py", >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> line 1089, in Run >>>>>>>>>>>>>>>>>>>>>> result = command_instance.Run(args) >>>>>>>>>>>>>>>>>>>>>> File >>>>>>>>>>>>>>>>>>>>>> "/home/james/google-cloud-sdk/lib/googlecloudsdk/appengine/app_commands/deploy.py", >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> line 111, in Run >>>>>>>>>>>>>>>>>>>>>> client.PrepareVmRuntime() >>>>>>>>>>>>>>>>>>>>>> File >>>>>>>>>>>>>>>>>>>>>> "/home/james/google-cloud-sdk/./lib/googlecloudsdk/appengine/lib/appengine_client.py", >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> line 281, in PrepareVmRuntime >>>>>>>>>>>>>>>>>>>>>> rpcserver.Send('/api/vms/prepare', >>>>>>>>>>>>>>>>>>>>>> app_id=self.project) >>>>>>>>>>>>>>>>>>>>>> File >>>>>>>>>>>>>>>>>>>>>> "/home/james/google-cloud-sdk/./lib/googlecloudsdk/appengine/lib/util.py", >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> line 347, in Send >>>>>>>>>>>>>>>>>>>>>> response = self._server.Send(*args, **kwargs) >>>>>>>>>>>>>>>>>>>>>> File >>>>>>>>>>>>>>>>>>>>>> "/home/james/google-cloud-sdk/./lib/googlecloudsdk/appengine/lib/external/tools/appengine_rpc_httplib2.py", >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> line 269, in Send >>>>>>>>>>>>>>>>>>>>>> 'Unexpected HTTP status %s' % status) >>>>>>>>>>>>>>>>>>>>>> File >>>>>>>>>>>>>>>>>>>>>> "/home/james/google-cloud-sdk/./lib/googlecloudsdk/appengine/lib/external/tools/appengine_rpc_httplib2.py", >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> line 67, in RaiseHttpError >>>>>>>>>>>>>>>>>>>>>> raise urllib2.HTTPError(url, >>>>>>>>>>>>>>>>>>>>>> response_info.status, msg, response_info, stream) >>>>>>>>>>>>>>>>>>>>>> RPCError: Server responded with code [400]: >>>>>>>>>>>>>>>>>>>>>> Bad Request Unexpected HTTP status 400 >>>>>>>>>>>>>>>>>>>>>> ERROR: (gcloud.preview.app.deploy) Server responded >>>>>>>>>>>>>>>>>>>>>> with code [400]: >>>>>>>>>>>>>>>>>>>>>> Bad Request Unexpected HTTP status 400 >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Monday, 25 May 2015 18:14:17 UTC+1, Ryan (Cloud >>>>>>>>>>>>>>>>>>>>>> Platform Support) wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Salutations! >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Are you still seeing this issue? If you are please >>>>>>>>>>>>>>>>>>>>>>> run the command with the --verbosity debug flag and try >>>>>>>>>>>>>>>>>>>>>>> in another region. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Thanks! >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Friday, May 22, 2015 at 10:29:16 AM UTC-4, James >>>>>>>>>>>>>>>>>>>>>>> Mortensen wrote: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Hello, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I'm going through all of the instructions here to >>>>>>>>>>>>>>>>>>>>>>>> deploy the helloworld Node.js app to Google App >>>>>>>>>>>>>>>>>>>>>>>> Engine, and I get a 400 >>>>>>>>>>>>>>>>>>>>>>>> error with no other details as to the problem. >>>>>>>>>>>>>>>>>>>>>>>> https://cloud.google.com/nodejs/getting-started/hello-world#running_hello_world >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Below is the output from the terminal: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> gcloud preview app deploy app.yaml --set-default >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> You are about to deploy the following modules: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> - nodejs-start/default/20150522t194829 From: >>>>>>>>>>>>>>>>>>>>>>>> [/Users/jem/Dev/1-hello-world/app.yaml] >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Do you want to continue (Y/n)? >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> ERROR: (gcloud.preview.app.deploy) Server >>>>>>>>>>>>>>>>>>>>>>>> responded with code [400]: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Bad Request Unexpected HTTP status 400 >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Jamess-MacBook-Pro-3:1-hello-world jem$ >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Anyone know what the problem is? Thanks, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> James >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>
-- You received this message because you are subscribed to the Google Groups "Google App Engine" group. To unsubscribe from this group and stop receiving emails from it, send an email to google-appengine+unsubscr...@googlegroups.com. To post to this group, send email to google-appengine@googlegroups.com. Visit this group at http://groups.google.com/group/google-appengine. To view this discussion on the web visit https://groups.google.com/d/msgid/google-appengine/234a3fa0-7511-445e-ae36-eda8e3017b88%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
