I had a HD taking ages to wake up and discovered I had the little jumper
on the wrong setting for slave / master. ( had been mucking around with
Raid and forgot to change it back.
When I took the jumper off it was gangbusters speed again.
ash wrote:
my ide drive has been making "boot up" noises intermittently, and then
it failed to post
works fine in an external enclosure
the rest of the machine seems happy enough, although the primary
master is sata and has a different power from the psu
what is the normal voltage to an ide drive?
can one bit of the psu output be defective
the onboard nvidia lan has gone on the blink, though the second
onboard lan (3 com) is mostly happy
is the psu dying ? - it's only a few months old (antec smartpower 400w)
c'mon - makes a change from endless argument about software... do
something useful :-) help me !
ash
_______________________________________________
Gpcg_talk mailing list
[email protected]
http://ozdocit.org/cgi-bin/mailman/listinfo/gpcg_talk
__________ NOD32 1861 (20061110) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
_______________________________________________
Gpcg_talk mailing list
[email protected]
http://ozdocit.org/cgi-bin/mailman/listinfo/gpcg_talk
