Nope, same issue: $ make bin/14E41673.usb DEBUG=tg3_main:3,tg3_hw,tg3_phy [BUILD] bin/usbdisk.o [OBJCOPY] bin/usbdisk.bin make: *** No rule to make target `bin/tg3_main.dbg3.o', needed by `bin/blib.a'. Stop.
All of the following commands gives the same error: make bin/14E41673.usb DEBUG=tg3_main:3,tg3_hw,tg3_phy make bin/14e41673.usb DEBUG=tg3_main:3,tg3_hw,tg3_phy make bin/14E41673.usb DEBUG=14E41673:3,tg3_hw,tg3_phy make bin/14e41673.usb DEBUG=14e41673:3,tg3_hw,tg3_phy br, Quinn On Tue, Jan 3, 2012 at 11:36 AM, Chris Pitzel <[email protected]>wrote: > Yeah iSCSI works great on the undi driver. Wanted to get native bcm5755 / > tg3 iscsi working simply so I could take the laptop outside of my dhcp/tftp > environment and still use it to http/tftp-load stuff.**** > > ** ** > > Looks like you’re working with the (new tg3-driver patched) gpxe code > tree. I think your error relates to how make interprets the tg3_main.usb > ‘target’. **** > > ** ** > > For example, if you go “make bin/80861043.usb”, it will build only the > code for PCI vendor 0x8086 (Intel), and PCI ID 0x1043, into the usb image. > **** > > ** ** > > In your case, if you want a pure bcm5755m driver build, wouldn’t you do, > “make bin/14E41673.usb DEBUG=tg3_main,tg3_hw,tg3_phy” ??? That’s my > thought (but its 4:35am here....).**** > > ** ** > > Chris**** > > ** ** > > ** ** > > *From:* Quinn Plattel [mailto:[email protected]] > *Sent:* Tuesday, January 03, 2012 4:26 AM > *To:* Chris Pitzel; [email protected]; [email protected] > > *Subject:* Re: [gPXE-devel] Attempting to add support for Broadcom > BCM5755M (14e4:1673) ethernet adapter**** > > ** ** > > Hi, > > I am currently testing his code now, but I currently have compile issues > when I try to turn on debugging. > Regarding iSCSI - i have a fair bit of experience there. I have a > gpxe/pxe/tftpboot/iscsi implementation currently working with Ubuntu. > Check out etherboot.org for my iscsi recipe. :-) > > Do you happen to know why I get this error: > > $ make bin/tg3_main.usb DEBUG=tg3_main:3,tg3_hw,tg3_phy > [BUILD] bin/usbdisk.o > [OBJCOPY] bin/usbdisk.bin > make: *** No rule to make target `bin/tg3_main.dbg3.o', needed by > `bin/blib.a'. Stop. > > > br, > Quinn**** > > On Tue, Jan 3, 2012 at 11:01 AM, Chris Pitzel <[email protected]> > wrote:**** > > I tried it out Thomas’ tg3 code as well on gPXE (Dell Latitude D630 and > D830 laptops). It seemed to be a little bit more stable during set-up, but > not good enough to make iSCSI work, and tftp booting would time-out.**** > > **** > > I did hack at the iPXE code, and found that, with the bcm5755m, if I > replaced the PCI ID (and a few other variables) of the BCM5787 with the > bcm5755m PCI ID, it sort of worked beter. Enough to tftp and http boot, > but no-go on the iSCSI. I think its a ring buffer issue; the bcm5755m has > a unique way of handling ring buffers compared to the other members of the > family. Even in the (linux) kernel tg3 driver, the amount of special > handling for the BCM5755 is considerable.**** > > **** > > Have you tested iSCSI? Or just tftp and http? **** > > **** > > Chris**** > > **** > > **** > > **** > > *From:* Quinn Plattel [mailto:[email protected]] > *Sent:* Tuesday, January 03, 2012 3:48 AM > *To:* Chris Pitzel > *Subject:* Re: [gPXE-devel] Attempting to add support for Broadcom > BCM5755M (14e4:1673) ethernet adapter**** > > **** > > Hi, > > I just tested Thomas's newest tg3 code. It is now working properly with > the Dell Laptop that didn't work in the previous version. :-) > > br, > Quinn**** > > On Mon, Jan 2, 2012 at 2:45 PM, Quinn Plattel <[email protected]> wrote:*** > * > > Check the list, Thomas Miletich has updated the code for the tg3 driver > and is calling for testers. > > br, > Quinn**** > > On Sun, Jan 1, 2012 at 12:42 AM, Chris Pitzel <[email protected]> > wrote:**** > > Hello. I was just reviewing your thread on the gPXE list concerning the > Broadcom BCM5755M (presumably from a Dell laptop).**** > > **** > > I’ve basically replicated your efforts on the latest iPXE build to the > same extent as your attempt. There appears to be a slight difference in > how the BCM5755M is handled in the mainline (Linux) kernel tg3 driver. ** > ** > > **** > > Have you pursued any additional line of inquiry? **** > > **** > > Chris**** > > Saskatchewan, Canada**** > > **** > > **** > > > > **** > > > -- > Best regards/Med venlig hilsen, > Quinn Plattel**** > > > > > -- > Best regards/Med venlig hilsen, > Quinn Plattel**** > > > > > -- > Best regards/Med venlig hilsen, > Quinn Plattel**** > -- Best regards/Med venlig hilsen, Quinn Plattel
_______________________________________________ gPXE-devel mailing list [email protected] http://etherboot.org/mailman/listinfo/gpxe-devel
