I made all of the changes you suggested below and it appears like it did the trick. My DOS floppy now boots properly and loads the DOS undi ndis.sys driver properly as well as the netbind.com command works too. I can obtain an IP address in DOS and I've got full network connectivity now.
Hopefully this helps confirm the issue so a fix can be applied to a future release. --greg -----Original Message----- From: Shao Miller [mailto:[email protected]] Sent: Thursday, March 11, 2010 23:43 To: Greg Fuller Cc: [email protected] Subject: Re: [gPXE] gpxe & keeping pxe stack loaded & DOS NDIS?? Shao Miller wrote: > ...This appears to be a regression in gPXE, since your image as well > as my own DOS UNDI testing image both fail with the same error... Well, it's a regression _of_sorts_. :) It turns out that I'd only ever gotten undionly.kkpxe to work in testing with a tiny change to gPXE. That change is incompatible with a certain change that was committed some time ago, now. Could you please temporarily change your ldms-dos label entry to: LABEL ldms-dos MENU LABEL Managed DOS MENU INDENT 1 KERNEL ldms-dos.gpxe and plop the following ldms-dos.gpxe script into the same directory as menu.cfg that goes: #!gpxe kernel memdisk floppy initrd ldms/x86pc/undi/dosundi/dosundi.1 ifclose net0 boot memdisk and remove any sign of any 'startpxe' command that you have, and use the undionly.kkpxe from here[1]. If you could please confirm that this works, that would be great. Thanks. - Shao Miller [1] http://etherboot.org/share/sha0/gpxe/src/bin/undionly.kkpxe _______________________________________________ gPXE mailing list [email protected] http://etherboot.org/mailman/listinfo/gpxe
