Hello! I would like to start with thanking you for the features you have integrated in the last years.
Some years ago I experimented with Etherboot/PXELinux but that was long before gPXE was there. HTTP, iSCSI, AOE and even WiFi ... that is just amazing! I am especially interested in WiFi and hope that you can help me build a working setup. I have downloaded the latest source code snapshot (the tarball linked on the wiki page) and I have built a PXE bootstrap loader image (.pxe) with the following command: make bin/ath5k.pxe DEBUG=wpa EMBEDDED_IMAGE=/home/user/wifi_berlin.gpxe the integrated script looks like this: #!gpxe iwlist iwstat set net0/ssid mySSID set net0/key myWPApassphrase dhcp net0 kernel http://etherboot.org/gtest/bz2bzImage root=100 initrd http://etherboot.org/gtest/initrd.bz2 boot my target PC has 2 NICs: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 168c:001a (rev 01) Atheros AR5005G 802.11abg NIC The Realtek NIC which is also running gPXE just chainloads ath5k.pxe. The output of iwlist and iwstat makes sense (2 WiFi networks incl the target network are listed). My AP is listed as WPA2. It is configured to support both, WPA and WPA2. The access is not restricted to certain MAC addresses. The distance between AP and the wifi client is 3 meters (no walls in between). However the link does not come up. I get the following error: Waiting for link-up on net0...WPA 0x2daf8 ALERT: PMKID mismatch in 1/4 WPA 0x2daa8 ALERT: PMKID mismatch in 1/4 last message appears 17 times failed: Permission denied (0x0226603c) Could not configure net0: Permission denied (0x0226603c) I am sorry for not providing a detailed log. This PC does not have any serial ports, so I cannot use a NULL modem cable to capture the output. I have entered the WPA passphrase several times to make sure there is no typo in it. Can you think of anything else that I could check? Thank you very much! Best regards, Alex _______________________________________________ gPXE mailing list [email protected] http://etherboot.org/mailman/listinfo/gpxe
