Hi, The following are the main connection I http://etherboot.org/wiki/howtos with BANNER_TIMEOUT and even do a keyword search TIMEOUT http://etherboot.org/wiki/removable http://etherboot.org/wiki/removable http://etherboot.org/wiki/removable http://etherboot.org/wiki/usbwithstorage http://etherboot.org/wiki/romburning http://etherboot.org/wiki/pxechaining http://etherboot.org/wiki/rplchaining http://etherboot.org/wiki/proxydhcp http://etherboot.org/wiki/httpboot http://etherboot.org/wiki/scripting http://etherboot.org/wiki/sanboot http://etherboot.org/wiki/sanboot/iscsi_install http://etherboot.org/wiki/wirelessboot http://etherboot.org/wiki/winpe_memdisk http://etherboot.org/wiki/dhcpd http://etherboot.org/wiki/dnsmasq http://etherboot.org/wiki/msdhcp http://etherboot.org/wiki/mikrotik http://etherboot.org/wiki/debug http://etherboot.org/wiki/dev/gdbstub The above does not timeout-related content. Only the connection, but not what you want http://etherboot.org/wiki/winpe %BCDEDIT% -set {bootmgr} timeout 30 On the home page Use the search feature to search timeout keyword http://etherboot.org/wiki/doku.php?do=search&id=BANNER_TIMEOUT&fulltext=Search Find two connections: 1. http://etherboot.org/wiki/appnotes/pxelinux_tftp_to_http_migration?s[]=banner&s[]=timeout We also experienced DHCP timeouts on some of our older switches. It seems that although the link was “up” it was not yet passing traffic (spanning-tree portfast did not seem to be the issue in this case). The easiest way around the issue was to increase the gPXE banner timeout in src/config/general.h to 10 seconds and rebuild the undionly image: /* * Timer configuration * */ #define BANNER_TIMEOUT 100 /* Tenths of a second for which the shell banner should appear */ ================================================================================== This method and Thomas Miletich said method is the same 2. http://etherboot.org/wiki/appnotes/gpxeonqemu091?s[]=banner&s[]=timeout Look up several times, seems to be a qemu.
================================================================================ Please guide a simple way, I'm confused. If possible, or hope to be able to add to the http://www.rom-o-matic.net/, this I understand lsq726 :( 在2010-04-04 22:27:17，"Piotr Jaroszyński" <[email protected]> 写道： >2010/4/4 lsq726 <[email protected]>: >> Hi, >> I refer to your method, but run into git fetch peper >> Tip: >> fatal:the remote end hung up unexpectedly > >Hmm, not sure why the server wouldn't work for you. Try: > >$ git clone git://git.etherboot.org/scm/gpxe.git >$ cd gpxe/ >$ git remote add peper http://github.com/peper/gpxe-peper.git >$ git fetch peper >$ git checkout base64 >$ cd src >$ make > >> Modify the code which file you can modify the BANNER_TIMEOUT 0\ >In gpxe/src: >$ echo "#define BANNER_TIMEOUT 0" > config/local/general.h > >> How can generate undi of GPXE.PXE? >> How can generate all-drivers of gpxe.pxe? >> How to build for a particular NIC's gpxe.pxe? > >http://etherboot.org/wiki/howtos > >-- >Best Regards >Piotr Jaroszyński
_______________________________________________ gPXE mailing list [email protected] http://etherboot.org/mailman/listinfo/gpxe
