Hello, thanks for the update. On Thu, Apr 14, 2011 at 3:29 AM, Schafer, Christopher L CTR USAF AFMC AFRL/RDSM <christopher.schafer....@maui.afmc.af.mil> wrote: > Latest Broadcom driver fixed it...
Just to clarify. Do you mean you updated the Windows broadcom driver which resolved the LUN reattachment issue, or did you update the PXE rom to solve the 10MBit issue? I think I've heard of Broadcom cards that wouldn't negotiate to anything else besides 10MBit/s with their native PXE rom(not only in combination with gPXE) and it would be interesting to know if this is the case here. A new PXE rom from Broadcom could resolve this issue. Thanks Thomas > -----Original Message----- > From: Gene Cumm [mailto:gene.c...@gmail.com] > Sent: Tuesday, April 12, 2011 5:23 PM > To: Schafer, Christopher L CTR USAF AFMC AFRL/RDSM; gpxe > Subject: Re: [gPXE] Win 7 install pxe chain loader nic won't auto negotiate > 1000Mbps > > On Tue, Apr 12, 2011 at 22:31, Schafer, Christopher L CTR USAF AFMC > AFRL/RDSM <christopher.schafer....@maui.afmc.af.mil> wrote: >> HP PXE downloads >> >> gPXE from tftp >> downloads gpxe script >> >> connects to SAN/NAS iscsi lun. >> >> I have been able to hard code 100 full in the hp PXE bios but it won't >> hard code to 1000 nor does auto work. Switch is a 2960G copper. >> >> Not sure which driver but it does appear to be a Broadcom >> Broadcom NetXtreme Gigabit >> PCI\VEN_14E4&DEV_1684&SUBSYS_1309103C&REV_10 >> PCI\VEN_14E4&DEV_1684&SUBSYS_1309103C >> PCI\VEN_14E4&DEV_1684&CC_020000 >> PCI\VEN_14E4&DEV_1684&CC_0200 > > I'd guess that you must be using the undionly driver in a PXE format > (.pxe, .kpxe, or .kkpxe) as 14e4:1684 does not appear to be recognized > by any driver in gPXE at this time. If you haven't tried the .kkpxe, > it might be worth a shot. > >> But since then I have been now having troubles getting the lun to stick >> around after the installer loads. > > It is up to the OS to reconnect to the LUN after it loads its own drivers. > >> -----Original Message----- >> From: Gene Cumm [mailto:gene.c...@gmail.com] >> Sent: Tuesday, April 12, 2011 2:48 PM >> To: Schafer, Christopher L CTR USAF AFMC AFRL/RDSM >> Cc: gpxe@etherboot.org >> Subject: Re: [gPXE] Win 7 install pxe chain loader nic won't auto >> negotiate 1000Mbps >> >> On Tue, Apr 12, 2011 at 20:25, Schafer, Christopher L CTR USAF AFMC >> AFRL/RDSM <christopher.schafer....@maui.afmc.af.mil> wrote: >>> Installing a HP z400 using win 7 x 64 ent onto a Oracle 7320 iscsi >> lun. >>> >>> Machine gets stuck at 10Mbit..... >>> >>> Suggestions? >> >> First would probably be providing more details. What's the sequence >> that you're using? What gPXE driver are you using? Have you been >> able to test with any other OS setup that negotiates the NICs to other >> speeds (ie WinPE or a Linux LiveCD)? What's the PCI ID of your NIC >> (perhaps a bug if you're using a full driver)? >> >> -- >> -Gene >> > > > > -- > -Gene > > "No one ever says, 'I can't read that ASCII(plain text) e-mail you sent me.'" > _______________________________________________ > gPXE mailing list > gPXE@etherboot.org > http://etherboot.org/mailman/listinfo/gpxe > _______________________________________________ gPXE mailing list gPXE@etherboot.org http://etherboot.org/mailman/listinfo/gpxe
