Hello, hpa: Did you have time to take a look at this? Details below..
-- Pasi On Mon, Jul 11, 2011 at 10:18:39PM +0300, Pasi Kärkkäinen wrote: > On Wed, May 18, 2011 at 05:59:10PM -0400, Gene Cumm wrote: > > On Wed, May 18, 2011 at 15:28, Pasi Kärkkäinen <pa...@iki.fi> wrote: > > > On Wed, May 18, 2011 at 10:09:18PM +0300, Pasi Kärkkäinen wrote: > > >> Hello, > > >> > > >> I'm using the following "default" cfgfile for gpxelinux.0: > > >> > > >> default menu.c32 > > >> prompt 1 > > >> menu title Default PXE boot menu > > >> timeout 100 > > >> > > >> label Boot from local disk > > >> localboot 0x80 > > >> > > >> I get the PXE menu, and I choose "Boot from local disk". > > >> After that I see the following on the server console: > > >> > > >> Booting from local disk... > > >> PXE-M0F: Exiting Intel Boot Agent. > > >> > > >> .. and nothing happens. Any ideas what could cause that? > > >> I'm currently using gpxelinux v1.0.0. > > >> > > > > > > .. from syslinux v4.04. > > > > > > And I just figured out "localboot -1" seems to work.. > > > > 1) It's really a Syslinux question. > > > > 2) In the official archive, doc/syslinux.txt explains the option. > > 0x80 is wrong for PXELINUX; use -1 or 0. > > > > 3) It's a common issue documented in the Syslinux Wiki. > > > > 4) Could you collect either the output of dmidecode or sysdump.c32 and > > email it to h...@zytor.com ? > > > > -- > > -Gene > > Hello again, > > Ok, so I finally had some more time to play with this stuff. > > Using gpxelinux.0 from syslinux 4.04 and "localboot 0" hangs my server, > it says on the console: > > Booting from local disk... > PXE-M0F: Exiting Intel Boot Agent. > > <hangs here, no further output> > > Using "localboot -1" instead works OK. > > Here's the output from dmidecode from RHEL 5.6 running on that problematic > server: > - http://pasik.reaktio.net/gpxelinux/dell-c6100/dmidecode.txt > - http://pasik.reaktio.net/gpxelinux/dell-c6100/lspci.txt > - http://pasik.reaktio.net/gpxelinux/dell-c6100/lspci-vvv.txt > > Hardware info: > - Dell PowerEdge C6100 server, (latest) BIOS version 1.56. > - I'm PXE booting from Intel 82576 GE NIC, firmware version 1.3.64. > > > Anything else needed to troubleshoot the problem? > > Thanks, > > -- Pasi > _______________________________________________ gPXE mailing list gPXE@etherboot.org http://etherboot.org/mailman/listinfo/gpxe