how do I do this? this is the flash rom built into a system. is there a command
for this? I could sure use one. I am trying to make it so if the lan boot rom
does get booted again, it will skip the lan boot and default to the hard drive
and ignore the LAN boot ROM I would like to flash.
it's built into a motherboard. I am trying to render it inert.
help appreciated. software even more appreciated, especially if it's an iso I
can just burn to clear the rom.
-------------
Jim Michaels
[email protected]
[email protected]
http://RenewalComputerServices.com
http://JesusnJim.com (my personal site, has software)
---
IEC Units: Computer RAM & SSD measurements, microsoft disk size measurements
(note: they will say GB or MB or KB or TB when it is IEC Units!):
[KiB] [MiB] [GiB] [TiB]
[2^10B=1,024^1B=1KiB]
[2^20B=1,024^2B=1,048,576B=1MiB]
[2^30B=1,024^3B=1,073,741,824B=1GiB]
[2^40B=1,024^4B=1,099,511,627,776B=1TiB]
[2^50B=1,024^5B=1,125,899,906,842,624B=1PiB]
SI Units: Hard disk industry disk size measurements:
[kB] [MB] [GB] [TB]
[10^3B=1,000B=1kB]
[10^6B=1,000,000B=1MB]
[10^9B=1,000,000,000B=1GB]
[10^12B=1,000,000,000,000B=1TB]
[10^15B=1,000,000,000,000,000B=1PB]
_______________________________________________
gPXE mailing list
[email protected]
http://etherboot.org/mailman/listinfo/gpxe
