Hi,
make sure that there is only one mongodb_uri configuration setting in your
configuration file (currently there are 2) and that the configured MongoDB
server can be reached through the given MongoDB URI.
In your case, there doesn't seem to be a MongoDB server running on localhost
on port 27017 (maybe use the IP address).
Cheers,
Jochen
On Monday, 9 May 2016 16:43:39 UTC+2, HockeyFan0000 wrote:
>
> This is a new installation of Graylog2, MongoDB and Elasticsearch. The
> Graylog login page says there are no Graylog servers. When looking in the
> logs for Graylog, I see the following errors:
>
> *2016-05-09T09:12:22.090-04:00 ERROR [CmdLineTool] Guice error (more detail
> on log level debug): Error injecting constructor,
> com.mongodb.MongoTimeoutException: Timed out after 10000 ms while waiting for
> a server that matches AnyServerSelector{}. Client view of cluster state is
> {type=Unknown, servers=[{address=localhost:27017, type=Unknown,
> state=Connecting, exception={com.mongodb.MongoException$Network: Exception
> opening the socket}, caused by {java.net.ConnectException: Connection
> refused}}]*
>
> and
>
>
> *2016-05-09T09:12:35.136-04:00 ERROR [MongoConnectionProvider] Error
> connecting to MongoDB: Timed out after 10000 ms while waiting to connect.
> Client view of cluster state is {type=Unknown,
> servers=[{address=localhost:27017, type=Unknown, state=Connecting,
> exception={com.mongodb.MongoException$Network: Exception opening the socket},
> caused by {java.net.ConnectException: Connection refused}}]*
>
>
>
> My configuration is below. I've edited the password secret and root
> password lines. I've also tried commenting out the line (which, it
> originally was when I first noticed this issue) to authenticate against
> MongoDB, but it still doesn't work.
> Any help you can give is greatly appreciated.
>
>
> -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>
> # If you are running more than one instances of graylog2-server you have
> to select one of these
> # instances as master. The master will perform some periodical tasks that
> non-masters won't perform.
> is_master = true
>
> # The auto-generated node ID will be stored in this file and read after
> restarts. It is a good idea
> # to use an absolute file path here if you are starting graylog2-server
> from init scripts or similar.
> node_id_file = /etc/graylog/server/node-id
>
> # You MUST set a secret to secure/pepper the stored user passwords here.
> Use at least 64 characters.
> # Generate one by using for example: pwgen -N 1 -s 96
> password_secret =
> n9GrMSZcZgRU0YZ8qQWPds2TCdlfmf88sfd8krewwer88fsdakwer8531NZ0QiDmdDYfUxm0XaVn1g8HgfDR9m
>
> # The default root user is named 'admin'
> #root_username = admin
>
> # You MUST specify a hash password for the root user (which you only need
> to initially set up the
> # system and in case you lose connectivity to your authentication backend)
> # This password cannot be changed using the API or via the web interface.
> If you need to change it,
> # modify it in this file.
> # Create one by using for example: echo -n yourpassword | shasum -a 256
> # and put the resulting hash value into the following line
> root_password_sha2 =
> 8ee22e8fdaskj8fdsa8uksadfuk8fsda8kukrw3were0d34e3bd081c48953d078665
>
> # The email address of the root user.
> # Default is empty
> root_email = "[email protected]"
>
> # The time zone setting of the root user.
> # The configured time zone must be parseable by
> http://www.joda.org/joda-time/apidocs/org/joda/time/DateTimeZone.html#forID-java.lang.String-
> # Default is UTC
> root_timezone = UTC
>
> # Set plugin directory here (relative or absolute)
> plugin_dir = /usr/share/graylog-server/plugin
>
> # REST API listen URI. Must be reachable by other graylog2-server nodes if
> you run a cluster.
> rest_listen_uri = http://172.20.10.250:12900/
>
> # REST API transport address. Defaults to the value of rest_listen_uri.
> Exception: If rest_listen_uri
> # is set to a wildcard IP address (0.0.0.0) the first non-loopback IPv4
> system address is used.
> # If set, his will be promoted in the cluster discovery APIs, so other
> nodes may try to connect on
> # this address and it is used to generate URLs addressing entities in the
> REST API. (see rest_listen_uri)
> # You will need to define this, if your Graylog server is running behind a
> HTTP proxy that is rewriting
> # the scheme, host name or URI.
> #rest_transport_uri = http://192.168.1.1:12900/
>
> # Enable CORS headers for REST API. This is necessary for JS-clients
> accessing the server directly.
> # If these are disabled, modern browsers will not be able to retrieve
> resources from the server.
> # This is disabled by default. Uncomment the next line to enable it.
> #rest_enable_cors = true
>
> # Enable GZIP support for REST API. This compresses API responses and
> therefore helps to reduce
> # overall round trip times. This is disabled by default. Uncomment the
> next line to enable it.
> #rest_enable_gzip = true
>
> # Enable HTTPS support for the REST API. This secures the communication
> with the REST API with
> # TLS to prevent request forgery and eavesdropping. This is disabled by
> default. Uncomment the
> # next line to enable it.
> #rest_enable_tls = true
>
> # The X.509 certificate file to use for securing the REST API.
> #rest_tls_cert_file = /path/to/graylog2.crt
>
> # The private key to use for securing the REST API.
> #rest_tls_key_file = /path/to/graylog2.key
>
> # The password to unlock the private key used for securing the REST API.
> #rest_tls_key_password = secret
>
> # The maximum size of a single HTTP chunk in bytes.
> #rest_max_chunk_size = 8192
>
> # The maximum size of the HTTP request headers in bytes.
> #rest_max_header_size = 8192
>
> # The maximal length of the initial HTTP/1.1 line in bytes.
> #rest_max_initial_line_length = 4096
>
> # The size of the execution handler thread pool used exclusively for
> serving the REST API.
> #rest_thread_pool_size = 16
>
> # The size of the worker thread pool used exclusively for serving the REST
> API.
> #rest_worker_threads_max_pool_size = 16
>
>
> #------------------------------------------------------------------------------------------------------------------------------------------------------
> # Elasticsearch Configuration
>
> #------------------------------------------------------------------------------------------------------------------------------------------------------
>
> # Embedded Elasticsearch configuration file
> # pay attention to the working directory of the server, maybe use an
> absolute path here
> #elasticsearch_config_file = /etc/graylog/server/elasticsearch.yml
>
> # Graylog will use multiple indices to store documents in. You can
> configured the strategy it uses to determine
> # when to rotate the currently active write index.
> # It supports multiple rotation strategies:
> # - "count" of messages per index, use elasticsearch_max_docs_per_index
> below to configure
> # - "size" per index, use elasticsearch_max_size_per_index below to
> configure
> # valid values are "count", "size" and "time", default is "count"
> rotation_strategy = count
>
> # (Approximate) maximum number of documents in an Elasticsearch index
> before a new index
> # is being created, also see no_retention and
> elasticsearch_max_number_of_indices.
> # Configure this if you used 'rotation_strategy = count' above.
> elasticsearch_max_docs_per_index = 20000000
>
> # (Approximate) maximum size in bytes per Elasticsearch index on disk
> before a new index is being created, also see
> # no_retention and elasticsearch_max_number_of_indices. Default is 1GB.
> # Configure this if you used 'rotation_strategy = size' above.
> #elasticsearch_max_size_per_index = 1073741824
>
> # (Approximate) maximum time before a new Elasticsearch index is being
> created, also see
> # no_retention and elasticsearch_max_number_of_indices. Default is 1 day.
> # Configure this if you used 'rotation_strategy = time' above.
> # Please note that this rotation period does not look at the time
> specified in the received messages, but is
> # using the real clock value to decide when to rotate the index!
> # Specify the time using a duration and a suffix indicating which unit you
> want:
> # 1w = 1 week
> # 1d = 1 day
> # 12h = 12 hours
> # Permitted suffixes are: d for day, h for hour, m for minute, s for
> second.
> #elasticsearch_max_time_per_index = 1d
>
> # Disable checking the version of Elasticsearch for being compatible with
> this Graylog release.
> # WARNING: Using Graylog with unsupported and untested versions of
> Elasticsearch may lead to data loss!
> #elasticsearch_disable_version_check = true
>
> # Disable message retention on this node, i. e. disable Elasticsearch
> index rotation.
> #no_retention = false
>
> # How many indices do you want to keep?
> elasticsearch_max_number_of_indices = 20
>
> # Decide what happens with the oldest indices when the maximum number of
> indices is reached.
> # The following strategies are availble:
> # - delete # Deletes the index completely (Default)
> # - close # Closes the index and hides it from the system. Can be
> re-opened later.
> retention_strategy = delete
>
> # How many Elasticsearch shards and replicas should be used per index?
> Note that this only applies to newly created indices.
> elasticsearch_shards = 1
> elasticsearch_replicas = 0
>
> # Prefix for all Elasticsearch indices and index aliases managed by
> Graylog.
> elasticsearch_index_prefix = graylog2
>
> # Name of the Elasticsearch index template used by Graylog to apply the
> mandatory index mapping.
> # # Default: graylog-internal
> #elasticsearch_template_name = graylog-internal
>
> # Do you want to allow searches with leading wildcards? This can be
> extremely resource hungry and should only
> # be enabled with care. See also:
> https://www.graylog.org/documentation/general/queries/
> allow_leading_wildcard_searches = false
>
> # Do you want to allow searches to be highlighted? Depending on the size
> of your messages this can be memory hungry and
> # should only be enabled after making sure your Elasticsearch cluster has
> enough memory.
> allow_highlighting = false
>
> # settings to be passed to elasticsearch's client (overriding those in the
> provided elasticsearch_config_file)
> # all these
> # this must be the same as for your Elasticsearch cluster
> #elasticsearch_cluster_name = graylog2
>
> # you could also leave this out, but makes it easier to identify the
> graylog2 client instance
> #elasticsearch_node_name = testing
>
> # we don't want the graylog2 server to store any data, or be master node
> #elasticsearch_node_master = false
> #elasticsearch_node_data = false
>
> # use a different port if you run multiple Elasticsearch nodes on one
> machine
> #elasticsearch_transport_tcp_port = 9350
>
> # we don't need to run the embedded HTTP server here
> #elasticsearch_http_enabled = false
>
> #elasticsearch_discovery_zen_ping_multicast_enabled = false
> elasticsearch_discovery_zen_ping_unicast_hosts = 172.20.10.250:9300
>
> # Change the following setting if you are running into problems with
> timeouts during Elasticsearch cluster discovery.
> # The setting is specified in milliseconds, the default is 5000ms (5
> seconds).
> #elasticsearch_cluster_discovery_timeout = 5000
>
> # the following settings allow to change the bind addresses for the
> Elasticsearch client in graylog2
> # these settings are empty by default, letting Elasticsearch choose
> automatically,
> # override them here or in the 'elasticsearch_config_file' if you need to
> bind to a special address
> # refer to
> http://www.elasticsearch.org/guide/en/elasticsearch/reference/0.90/modules-network.html
> # for special values here
> #elasticsearch_network_host =
> #elasticsearch_network_bind_host =
> #elasticsearch_network_publish_host =
>
> # The total amount of time discovery will look for other Elasticsearch
> nodes in the cluster
> # before giving up and declaring the current node master.
> #elasticsearch_discovery_initial_state_timeout = 3s
>
> # Analyzer (tokenizer) to use for message and full_message field. The
> "standard" filter usually is a good idea.
> # All supported analyzers are: standard, simple, whitespace, stop,
> keyword, pattern, language, snowball, custom
> # Elasticsearch documentation:
> http://www.elasticsearch.org/guide/reference/index-modules/analysis/
> # Note that this setting only takes effect on newly created indices.
> elasticsearch_analyzer = standard
>
> # Global request timeout for Elasticsearch requests (e. g. during search,
> index creation, or index time-range
> # calculations) based on a best-effort to restrict the runtime of
> Elasticsearch operations.
> # Default: 1m
> #elasticsearch_request_timeout = 1m
>
> # Time interval for index range information cleanups. This setting defines
> how often stale index range information
> # is being purged from the database.
> # Default: 1h
> #index_ranges_cleanup_interval = 1h
>
> # Batch size for the Elasticsearch output. This is the maximum (!) number
> of messages the Elasticsearch output
> # module will get at once and write to Elasticsearch in a batch call. If
> the configured batch size has not been
> # reached within output_flush_interval seconds, everything that is
> available will be flushed at once. Remember
> # that every outputbuffer processor manages its own batch and performs its
> own batch write calls.
> # ("outputbuffer_processors" variable)
> output_batch_size = 500
>
> # Flush interval (in seconds) for the Elasticsearch output. This is the
> maximum amount of time between two
> # batches of messages written to Elasticsearch. It is only effective at
> all if your minimum number of messages
> # for this time period is less than output_batch_size *
> outputbuffer_processors.
> output_flush_interval = 1
>
> # As stream outputs are loaded only on demand, an output which is failing
> to initialize will be tried over and
> # over again. To prevent this, the following configuration options define
> after how many faults an output will
> # not be tried again for an also configurable amount of seconds.
> output_fault_count_threshold = 5
> output_fault_penalty_seconds = 30
>
> # The number of parallel running processors.
> # Raise this number if your buffers are filling up.
> processbuffer_processors = 5
> outputbuffer_processors = 3
>
> #outputbuffer_processor_keep_alive_time = 5000
> #outputbuffer_processor_threads_core_pool_size = 3
> #outputbuffer_processor_threads_max_pool_size = 30
>
> # UDP receive buffer size for all message inputs (e. g. SyslogUDPInput).
> #udp_recvbuffer_sizes = 1048576
>
> # Wait strategy describing how buffer processors wait on a cursor
> sequence. (default: sleeping)
> # Possible types:
> # - yielding
> # Compromise between performance and CPU usage.
> # - sleeping
> # Compromise between performance and CPU usage. Latency spikes can
> occur after quiet periods.
> # - blocking
> # High throughput, low latency, higher CPU usage.
> # - busy_spinning
> # Avoids syscalls which could introduce latency jitter. Best when
> threads can be bound to specific CPU cores.
> processor_wait_strategy = blocking
>
> # Size of internal ring buffers. Raise this if raising
> outputbuffer_processors does not help anymore.
> # For optimum performance your LogMessage objects in the ring buffer
> should fit in your CPU L3 cache.
> # Start server with --statistics flag to see buffer utilization.
> # Must be a power of 2. (512, 1024, 2048, ...)
> ring_size = 65536
>
> inputbuffer_ring_size = 65536
> inputbuffer_processors = 2
> inputbuffer_wait_strategy = blocking
>
> # Enable the disk based message journal.
> message_journal_enabled = true
>
> # The directory which will be used to store the message journal. The
> directory must me exclusively used by Graylog and
> # must not contain any other files than the ones created by Graylog itself.
> message_journal_dir = /var/lib/graylog-server/journal
>
> # Journal hold messages before they could be written to Elasticsearch.
> # For a maximum of 12 hours or 5 GB whichever happens first.
> # During normal operation the journal will be smaller.
> #message_journal_max_age = 12h
> #message_journal_max_size = 5gb
>
> #message_journal_flush_age = 1m
> #message_journal_flush_interval = 1000000
> #message_journal_segment_age = 1h
> #message_journal_segment_size = 100mb
>
> # Number of threads used exclusively for dispatching internal events.
> Default is 2.
> #async_eventbus_processors = 2
>
> # EXPERIMENTAL: Dead Letters
> # Every failed indexing attempt is logged by default and made visible in
> the web-interface. You can enable
> # the experimental dead letters feature to write every message that was
> not successfully indexed into the
> # MongoDB "dead_letters" collection to make sure that you never lose a
> message. The actual writing of dead
> # letter should work fine already but it is not heavily tested yet and
> will get more features in future
> # releases.
> dead_letters_enabled = false
>
> # How many seconds to wait between marking node as DEAD for possible load
> balancers and starting the actual
> # shutdown process. Set to 0 if you have no status checking load balancers
> in front.
> lb_recognition_period_seconds = 3
>
> # Every message is matched against the configured streams and it can
> happen that a stream contains rules which
> # take an unusual amount of time to run, for example if its using regular
> expressions that perform excessive backtracking.
> # This will impact the processing of the entire server. To keep such
> misbehaving stream rules from impacting other
> # streams, Graylog limits the execution time for each stream.
> # The default values are noted below, the timeout is in milliseconds.
> # If the stream matching for one stream took longer than the timeout
> value, and this happened more than "max_faults" times
> # that stream is disabled and a notification is shown in the web interface.
> #stream_processing_timeout = 2000
> #stream_processing_max_faults = 3
>
> # Length of the interval in seconds in which the alert conditions for all
> streams should be checked
> # and alarms are being sent.
> #alert_check_interval = 60
>
> # Since 0.21 the graylog2 server supports pluggable output modules. This
> means a single message can be written to multiple
> # outputs. The next setting defines the timeout for a single output
> module, including the default output module where all
> # messages end up.
> #
> # Time in milliseconds to wait for all message outputs to finish writing a
> single message.
> #output_module_timeout = 10000
>
> # Time in milliseconds after which a detected stale master node is being
> rechecked on startup.
> #stale_master_timeout = 2000
>
> # Time in milliseconds which Graylog is waiting for all threads to stop on
> shutdown.
> #shutdown_timeout = 30000
>
>
> #------------------------------------------------------------------------------------------------------------------------------------------------------
> # MongoDB Configuration
>
> #------------------------------------------------------------------------------------------------------------------------------------------------------
>
> # MongoDB connection string
> # See http://docs.mongodb.org/manual/reference/connection-string/ for
> details
> mongodb_uri = mongodb://localhost/graylog2
>
> # Authenticate against the MongoDB server
> mongodb_uri = mongodb://graylog:M0ng0DB@localhost:27017/graylog2
>
> # Dont' use any authentication to connect to MongoDB
> #mongodb_useauth = false
>
> # Use a replica set instead of a single host
> #mongodb_uri =
> mongodb://grayloguser:secret@localhost:27017,localhost:27018,localhost:27019/graylog2
>
> # Increase this value according to the maximum connections your MongoDB
> server can handle from a single client
> # if you encounter MongoDB connection problems.
> mongodb_max_connections = 100
>
> # Number of threads allowed to be blocked by MongoDB connections
> multiplier. Default: 5
> # If mongodb_max_connections is 100, and
> mongodb_threads_allowed_to_block_multiplier is 5,
> # then 500 threads can block. More than that and an exception will be
> thrown.
> #
> http://api.mongodb.org/java/current/com/mongodb/MongoOptions.html#threadsAllowedToBlockForConnectionMultiplier
> mongodb_threads_allowed_to_block_multiplier = 5
>
> # Drools Rule File (Use to rewrite incoming log messages)
> # See: https://www.graylog.org/documentation/general/rewriting/
> #rules_file = /etc/graylog/server/rules.drl
>
> # Email transport
> #transport_email_enabled = false
> #transport_email_hostname = mail.example.com
> #transport_email_port = 587
> #transport_email_use_auth = true
> #transport_email_use_tls = true
> #transport_email_use_ssl = true
> #transport_email_auth_username = [email protected]
> #transport_email_auth_password = secret
> #transport_email_subject_prefix = [graylog2]
> #transport_email_from_email = [email protected]
>
> # Specify and uncomment this if you want to include links to the stream in
> your stream alert mails.
> # This should define the fully qualified base url to your web interface
> exactly the same way as it is accessed by your users.
> #transport_email_web_interface_url = https://graylog2.example.com
>
> # The default connect timeout for outgoing HTTP connections.
> # Values must be a positive duration (and between 1 and 2147483647 when
> converted to milliseconds).
> # Default: 5s
> #http_connect_timeout = 5s
>
> # The default read timeout for outgoing HTTP connections.
> # Values must be a positive duration (and between 1 and 2147483647 when
> converted to milliseconds).
> # Default: 10s
> #http_read_timeout = 10s
>
> # The default write timeout for outgoing HTTP connections.
> # Values must be a positive duration (and between 1 and 2147483647 when
> converted to milliseconds).
> # Default: 10s
> #http_write_timeout = 10s
>
> # HTTP proxy for outgoing HTTP connections
> #http_proxy_uri =
>
> # Disable the optimization of Elasticsearch indices after index cycling.
> This may take some load from Elasticsearch
> # on heavily used systems with large indices, but it will decrease search
> performance. The default is to optimize
> # cycled indices.
> #disable_index_optimization = true
>
> # Optimize the index down to <= index_optimization_max_num_segments. A
> higher number may take some load from Elasticsearch
> # on heavily used systems with large indices, but it will decrease search
> performance. The default is 1.
> #index_optimization_max_num_segments = 1
>
> # The threshold of the garbage collection runs. If GC runs take longer
> than this threshold, a system notification
> # will be generated to warn the administrator about possible problems with
> the system. Default is 1 second.
> #gc_warning_threshold = 1s
>
> # Connection timeout for a configured LDAP server (e. g. ActiveDirectory)
> in milliseconds.
> #ldap_connection_timeout = 2000
>
> # Enable collection of Graylog-related metrics into MongoDB
> # WARNING: This will add *a lot* of data into your MongoDB database on a
> regular interval (1 second)!
> # DEPRECATED: This setting and the respective feature will be removed in a
> future version of Graylog.
> #enable_metrics_collection = false
>
> # Disable the use of SIGAR for collecting system stats
> #disable_sigar = false
>
> # Amount of time of inactivity after which collectors are flagged as
> inactive (Default: 1 minute)
> #collector_inactive_threshold = 1m
>
> # Amount of time after which inactive collectors are purged (Default: 14
> days)
> #collector_expiration_threshold = 14d
>
> # The default cache time for dashboard widgets. (Default: 10 seconds,
> minimum: 1 second)
> #dashboard_widget_default_cache_time = 10s
>
> # Automatically load content packs in "content_packs_dir" on the first
> start of Graylog.
> #content_packs_loader_enabled = true
>
> # The directory which contains content packs which should be loaded on the
> first start of Graylog.
> content_packs_dir = /usr/share/graylog-server/contentpacks
>
> # A comma-separated list of content packs (files in "content_packs_dir")
> which should be applied on
> # the first start of Graylog.
> content_packs_auto_load = grok-patterns.json
>
>
--
You received this message because you are subscribed to the Google Groups
"Graylog Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/graylog2/1b38cdc5-0818-4b0c-91a3-53c3a75f9799%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.